مقدمه
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Keter Claire 2 Seater Sofa Set with Storage Table. Please read these instructions carefully before assembly and use to ensure safe and optimal performance of your product.
The Keter Claire Sofa Set is designed for both indoor and outdoor use, offering a comfortable seating solution with integrated storage. It is constructed from durable molded plastic, resistant to UV rays and various weather conditions.
اجزای محصول:
- ۱ عدد مبل دو نفره
- ۲ عدد صندلی راحتی
- 1 x Storage Table
- Cushions (for sofa and armchairs)
اطلاعات مهم ایمنی
برای جلوگیری از آسیب یا جراحت به محصول، لطفاً نکات ایمنی زیر را رعایت کنید:
- روی مبلمان نایستید و نپرید.
- قبل از استفاده مطمئن شوید که تمام اجزاء به طور ایمن بسته شده اند.
- از شعلههای آتش یا منابع گرمای شدید دور نگه دارید.
- Do not overload the storage table.
- وقتی بچهها نزدیک مبلمان هستند یا از آن استفاده میکنند، مراقبشان باشید.
راه اندازی و مونتاژ
The Keter Claire Sofa Set requires assembly. It is recommended that two adults perform the assembly. No special tools are typically required, as components are designed for interlocking or simple screw fastening.
قبل از شروع:
- تمام قطعات را از بستهبندی خارج کرده و با لیست قطعات مطابقت دهید.
- مطمئن شوید که فضای کافی برای مونتاژ دارید.
- قطعات کوچک را از کودکان دور نگه دارید.
مراحل مونتاژ:
- Step 1: Assemble the Armchairs. Connect the backrest to the seat base, then attach the armrests. Ensure all clips or screws are firmly engaged.
- Step 2: Assemble the Two-seater Sofa. Similar to the armchairs, connect the backrest to the seat base, then attach the armrests.
- Step 3: Assemble the Storage Table. Connect the side panels to the base and top. Ensure the lid mechanism (if any) is correctly installed.
- Step 4: Place Cushions. Once all furniture pieces are assembled, place the provided cushions onto the seats for comfort.
Figure 1: Fully assembled Keter Claire 2 Seater Sofa Set. This image displays the complete set, including the two armchairs, the two-seater sofa, and the central storage table, all in a graphite grey finish with light grey seat cushions.
دستورالعمل های عملیاتی
The Keter Claire Sofa Set is designed for comfortable seating and convenient storage.
Using the Seating:
- Ensure the furniture is placed on a flat, stable surface.
- The cushions are designed for outdoor use but it is recommended to store them indoors during prolonged periods of rain or harsh weather to maintain their condition.
Using the Storage Table:
The central table features integrated storage, ideal for keeping small outdoor items, cushions (when not in use), or other accessories.
- To access storage, lift the tabletop.
- Do not store heavy or sharp objects that could damage the interior.
- Ensure the lid is properly closed to protect contents from elements.
Figure 2: Detail of the Keter Claire Storage Table. This image highlights the textured surface and the design of the storage table, which is part of the sofa set. A small green teapot is visible on its surface.
نگهداری و مراقبت
The Keter Claire Sofa Set is designed for low maintenance and high durability. Following these simple care instructions will help prolong its lifespan and appearance:
تمیز کردن:
- سطوح پلاستیکی را با تبلیغات پاک کنیدamp پارچه و محلول صابون ملایم
- به طور کامل با آب تمیز بشویید تا باقیمانده صابون پاک شود.
- Avoid using abrasive cleaners, harsh chemicals, or stiff brushes, as these can damage the surface.
- For cushions, spot clean with a mild detergent and water. Allow to air dry completely before storing.
ذخیره سازی:
- While the set is weather-resistant, storing it indoors or covering it with a protective cover during extreme weather conditions (heavy snow, prolonged rain, strong winds) will extend its life.
- Store cushions in a dry, protected area when not in use, especially during off-season.
عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| مشکل در مونتاژ قطعات | Parts not aligned correctly; excess plastic from molding. | Ensure parts are correctly oriented as per instructions. Gently tap into place. If excess plastic, carefully trim with a utility knife (with caution). |
| Furniture feels wobbly after assembly | Components not fully engaged or secured. | Check all connection points to ensure they are fully clicked into place or screws are tightened. Ensure furniture is on a level surface. |
| Cushions getting wet/damp | Left exposed to rain or high humidity. | Store cushions in the storage table or indoors during wet weather. Allow to air dry completely if they get wet. |
مشخصات
| صفت | جزئیات |
|---|---|
| نام تجاری | کتر |
| شماره مدل | K253084 |
| مواد | پلاستیک قالب گیری شده |
| رنگ | Graphite/Gray |
| Storage Table Dimensions (L x W x H) | 60 × 120 × 64 سانتی متر |
| Overall Set Weight | 36 کیلوگرم |
| مونتاژ مورد نیاز است | بله |
| مقاومت | UV rays and weather effects |
| استفاده | داخلی و خارجی |
گارانتی و پشتیبانی
For information regarding warranty coverage, product support, or to purchase replacement parts, please contact Keter customer service or visit the official Keter website. Please have your model number (K253084) and proof of purchase available when contacting support.
Note: Warranty terms may vary by region and retailer. Refer to your purchase documentation for specific details.