ARCADE1UP Adjustable Height Stool (Joust) Instruction Manual

1. مقدمه

The ARCADE1UP Adjustable Height Stool (Joust) is designed to provide a comfortable and themed seating solution for your Arcade1Up game cabinet. This officially licensed stool features iconic Joust artwork and is built for durability and user comfort during extended gaming sessions. Its adjustable height feature makes it versatile for various arcade setups.

Image: The ARCADE1UP Joust Adjustable Height Stool, showcasing its design and chrome legs.

2. اطلاعات ایمنی

Please read and understand all safety instructions before assembling or using the stool. Failure to follow these instructions may result in injury or damage to the product.

• برای جلوگیری از واژگونی، مطمئن شوید که چهارپایه روی سطح صاف و پایدار قرار گرفته است.
• Do not overload the stool beyond its maximum weight capacity.
• هنگام تنظیم ارتفاع، دست‌ها و انگشتان خود را از قطعات متحرک دور نگه دارید.
• Periodically check all bolts and fasteners to ensure they are tight and secure.
• دور از شعله‌های آتش یا گرمای بیش از حد نگهداری شود.

3. محتویات بسته

قبل از شروع مونتاژ، از وجود همه اجزا اطمینان حاصل کنید:

• 1 x Stool Seat (Joust themed)
• 1 x Set of Chrome Legs (Base)
• 4 x Leg Extenders (for taller height setting)
• ۱ عدد بسته‌ی سخت‌افزاری (پیچ، واشر، آچار آلن)
• یک برگه دستورالعمل

4. راه اندازی

دستورالعمل مونتاژ

مونتاژ ساده است و معمولاً حداقل زمان را می‌برد. این مراحل را دنبال کنید:

1. Carefully unbox all components and lay them out on a soft, clean surface to prevent scratches.
2. Attach the chrome legs to the underside of the stool seat using the provided screws and Allen wrench. Ensure all screws are tightened securely.
3. For the 21.5-inch height setting, no leg extenders are needed.
4. For the 29.5-inch height setting, insert the four leg extenders into the bottom of each chrome leg. Ensure they click into place or are secured as per the specific hardware provided.

Image: Diagram illustrating the two adjustable height settings of the stool (21.5 inches and 29.5 inches).

5. دستورالعمل های عملیاتی

The ARCADE1UP stool is designed for simple use. Once assembled to your desired height, it provides stable seating. To switch between heights, you will need to remove or attach the leg extenders as described in the assembly section. The stool does not swivel.

Image: Close-up of the Joust themed stool seat, highlighting the detailed artwork.

6. تعمیر و نگهداری

To ensure the longevity and appearance of your ARCADE1UP stool, follow these simple maintenance guidelines:

• تمیز کردن: Wipe the stool with a dry cloth to remove dust and light dirt. For more stubborn marks on the vinyl seat, use a damp cloth with mild soap and water, then dry thoroughly. Avoid abrasive cleaners or solvents.
• Chrome Care: The chrome legs can be cleaned with a soft, dry cloth. For smudges or fingerprints, a chrome cleaner can be used sparingly, followed by buffing to a shine.
• بررسی های منظم: به صورت دوره‌ای تمام اتصالات و بست‌ها را بررسی کنید تا از محکم بودن آنها اطمینان حاصل شود. در صورت لزوم، دوباره آنها را محکم کنید.

7 عیب یابی

If you encounter any issues with your ARCADE1UP stool, consider the following common solutions:

• مدفوع لق به نظر می‌رسد: Ensure all assembly screws are fully tightened. Check that the stool is on a flat, level surface. If using leg extenders, ensure they are fully inserted and seated correctly.
• مشکل در تنظیم ارتفاع: Ensure no debris is obstructing the leg extender insertion points. Apply gentle, even pressure when inserting or removing extenders.
• Scratches on chrome: Minor scratches can sometimes be buffed out with a specialized chrome polish. For deeper scratches, professional repair may be required.

If problems persist, please refer to the Warranty and Support section.

8. مشخصات

9. گارانتی و پشتیبانی

For warranty information or technical support regarding your ARCADE1UP Adjustable Height Stool, please contact ARCADE1UP directly through their official webسایت یا کانال‌های خدمات مشتری. مدرک خرید خود را برای هرگونه ادعای گارانتی نگه دارید.

Image: The official ARCADE1UP logo.