FLEXISPOT H1W Hand-Crank Adjustable Standing Desk Instruction Manual

1. اطلاعات ایمنی مهم

لطفاً قبل از مونتاژ و استفاده، این دفترچه راهنما را با دقت مطالعه کنید. این دفترچه راهنما را برای مراجعات بعدی نگه دارید.

• ظرفیت وزنی: Do not exceed the maximum weight capacity of 80 kg (176 lbs). Overloading can cause instability and potential damage.
• ثبات: Ensure the desk is stable and level on a flat surface before placing items on it and during height adjustments.
• ترخیص: Keep the area around the desk clear of obstructions during operation to prevent pinching or damage.
• کودکان و حیوانات خانگی: برای جلوگیری از حوادث، کودکان و حیوانات خانگی را در حین کار از میز دور نگه دارید.
• مونتاژ: Follow all assembly instructions precisely. Incorrect assembly can lead to instability and injury.

2. محصول تمام شدview

The FLEXISPOT H1W is a hand-crank adjustable standing desk frame designed to provide a flexible and ergonomic workspace. It allows for smooth transitions between sitting and standing positions.

Figure 2.1: The FLEXISPOT H1W Hand-Crank Adjustable Standing Desk frame with a white tabletop, set up in an office environment.

ویژگی های کلیدی:

• تنظیم ارتفاع روان: The innovative hand-crank system provides a smooth and quiet height adjustment experience.
• محدوده ارتفاع قابل تنظیم: The desk frame can be adjusted from 71 cm (27.9 inches) to 121 cm (47.6 inches).
• Customizable Frame Width: The frame extends laterally from 85 cm (33.5 inches) to 129 cm (50.8 inches) to accommodate various tabletop sizes.
• ظرفیت وزن بالا: Designed for maximum structural integrity, supporting up to 80 kg (176 lbs).
• ساخت و ساز بادوام: Features double-walled steel tubes for enhanced strength and stability.
• Flexible Crank Installation: The hand crank can be installed on either the left or right side, or completely removed when not in use.

3. راه اندازی و مونتاژ

Assembly of the FLEXISPOT H1W desk frame is designed to be straightforward. It is recommended that one person performs the assembly.

3.1 باز کردن و بازرسی

• تمام قطعات را با دقت از جعبه خارج کنید.
• Verify that all parts listed in the packing list are present and undamaged. Contact customer support immediately if any parts are missing or damaged.
• تمام ابزارهای لازم برای مونتاژ در بسته‌بندی موجود است.

3.2 مراحل مونتاژ

Follow the detailed step-by-step instructions provided in the separate assembly guide included with your product. Key steps include:

1. Assemble the leg columns and feet.
2. Attach the crossbar and side brackets, adjusting the width to match your tabletop.
3. Install the hand-crank mechanism. The hand crank can be positioned on the left or right side of the desk, or removed entirely when not needed.
4. Securely attach your chosen tabletop to the assembled frame using appropriate screws (tabletop not included).

Figure 3.1: The desk frame's width can be adjusted from 850mm to 1290mm to fit various tabletops.

Figure 3.2: The hand crank offers flexible installation options, allowing it to be placed on either side or removed.

3.3 Recommended Tabletop Dimensions

• طول: 100 سانتی متر تا 160 سانتی متر (39.4 اینچ تا 63 اینچ)
• عرض: 60 سانتی متر تا 80 سانتی متر (23.6 اینچ تا 31.5 اینچ)
• ضخامت: 2 سانتی متر (0.8 اینچ) یا بیشتر

Figure 3.3: Recommended tabletop dimensions for optimal fit and stability.

4. دستورالعمل های عملیاتی

The FLEXISPOT H1W desk frame features a manual hand-crank system for height adjustment.

4.1 Adjusting Desk Height

1. Ensure the area above and below the desk is clear of any obstacles.
2. Locate the hand crank on the side of the desk.
3. To raise the desk, turn the hand crank clockwise.
4. To lower the desk, turn the hand crank counter-clockwise.
5. Adjust the desk to your desired sitting or standing height within the range of 71 cm to 121 cm.

Figure 4.1: The desk frame offers a height adjustment range from 710mm to 1210mm.

ظرفیت وزن 4.2

The desk frame is designed to safely support a maximum load of 80 kg (176 lbs). Distribute weight evenly across the tabletop to maintain stability.

Figure 4.2: The desk frame supports a maximum weight of 80 kg (176 lbs).

5. تعمیر و نگهداری

Regular maintenance helps ensure the longevity and smooth operation of your FLEXISPOT H1W desk frame.

• تمیز کردن: قاب میز را با یک پارچه نرم و لطیف پاک کنید.amp پارچه. از مواد شیمیایی قوی یا پاک‌کننده‌های ساینده که می‌توانند به روکش آسیب بزنند، خودداری کنید.
• اتصال دهنده ها: به صورت دوره‌ای تمام پیچ‌ها و مهره‌ها را بررسی کنید تا از سفت بودن آنها اطمینان حاصل کنید. در صورت لزوم، برای حفظ پایداری، آنها را دوباره سفت کنید.
• قطعات متحرک: The hand-crank mechanism is designed for smooth operation. If you notice any stiffness, ensure no debris is obstructing the mechanism. Do not lubricate unless specifically instructed by the manufacturer.
• توزیع وزن: Always distribute weight evenly on the tabletop. Avoid placing heavy items on one side only.

6 عیب یابی

If you encounter any issues with your FLEXISPOT H1W desk frame, refer to the following common troubleshooting tips:

• میز متزلزل است:
  • مطمئن شوید که تمام پیچ‌ها و مهره‌های مونتاژ محکم بسته شده‌اند.
  • Check that the desk is placed on a level surface. Adjust the leveling feet if necessary.
  • Verify that the tabletop is securely attached to the frame.
• Hand Crank is Stiff or Difficult to Turn:
  • Check for any obstructions in the crank mechanism or along the lifting columns.
  • مطمئن شوید که میز بیش از ظرفیت ۷۰ کیلوگرمی خود، بار اضافی روی آن قرار ندهید.
  • Confirm that the crank handle is properly installed.
• Desk Does Not Adjust Height Smoothly:
  • Ensure the weight on the desk is within the specified limit and evenly distributed.
  • Inspect the lifting columns for any visible damage or foreign objects.

اگر این مراحل مشکل را حل نکرد، لطفاً برای راهنمایی بیشتر با پشتیبانی مشتری FLEXISPOT تماس بگیرید.

7. مشخصات

8. گارانتی و پشتیبانی

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official FLEXISPOT webسایت

If you have any questions or require assistance with your FLEXISPOT H1W desk frame, please contact FLEXISPOT customer service directly.