Dualsky FC151 6-Axis Flight Control System User Manual

1. مقدمه

The Dualsky FC151 is a compact 6-axis flight control system designed for RC airplanes and quadcopters. It integrates a 3-axis gyroscope and a 3-axis accelerometer to provide advanced attitude stabilization. This manual provides essential information for the proper setup, operation, and maintenance of your FC151 unit.

Image 1.1: Dualsky FC151 Flight Control unit with indicated dimensions (36mm length, 27.5mm width, 12mm height).

2. ویژگی های کلیدی

• تثبیت ۳ محوره: Combines 3-axis gyroscope and 3-axis accelerometer for precise flight control.
• طراحی فشرده: Mini dimension, weighing only 8 grams.
• عملکرد بالا: Equipped with a 32-bit high-performance ARM MCU.
• Advanced Algorithm: Utilizes an original advanced attitude stabilization algorithm.
• Aircraft Compatibility: Supports single/double aileron, fly wing, and V-tail aircraft.
• Flaperon Mixing: Integrated support for flaperon mixing.
• حالت های پرواز: Supports aerobatic/3D airplanes and auto-level functionality.
• حساسیت قابل تنظیم: Independent sensitivity adjustment for all 3 axes.
• S.BUS Support: Compatible with Futaba S.BUS protocol.
• تغییر حالت: Allows mode switching via an extra channel.
• برنامه نویسی آسان: Programmed via a single button and LED indicators.
• HV Input Support: Compatible with High Voltage (HV) inputs.

3. محتویات بسته

پس از باز کردن بسته، بررسی کنید که همه اجزا موجود و بدون آسیب باشند:

• Dualsky FC151 Flight Control Unit
• Connecting Cables (if included, not explicitly listed but implied for installation)
• راهنمای دستورالعمل (این سند)

Image 3.1: The Dualsky FC151 Flight Control unit shown within its retail packaging.

4. راه اندازی و نصب

4.1 نصب فیزیکی

Mount the FC151 unit securely in your RC aircraft or quadcopter. Ensure it is oriented correctly according to the "HEAD DIRECTION" arrow on the unit. The compact size allows for flexible placement, but avoid areas with excessive vibration or electromagnetic interference.

تصویر ۲: بالا view of the FC151 unit, highlighting the 'HEAD DIRECTION' indicator and adjustment points for AIL, ELE, RUD.

4.2 اتصالات سیم کشی

Connect the FC151 to your receiver and servos using appropriate cables. The unit features clearly labeled ports for system power (SYS), aileron (AIL1, AIL2), elevator (ELE), rudder (RUD), and mode selection (MODE). If using S.BUS, refer to your receiver's manual for proper connection to the FC151's S.BUS port.

Image 4.2: The FC151 unit displaying its various input and output ports for connection to a receiver and servos.

4.3 Control Surface Types and Mixing

The FC151 supports various aircraft configurations. Ensure your transmitter is set up correctly for the chosen aircraft type, and then configure the FC151 accordingly. The unit supports:

• Single Aileron Aircraft
• Double Aileron Aircraft
• Fly Wing Aircraft (Delta Wing)
• V-Tail Aircraft

Flaperon mixing is also supported. Refer to the diagram below for visual guidance on control surface configurations.

Image 4.3: Diagram showing typical control surface setups for single/double aileron, V-tail, and fly wing aircraft.

4.4 تنظیم حساسیت

The FC151 allows independent sensitivity adjustment for aileron (AIL), elevator (ELE), and rudder (RUD) axes. Use a small screwdriver to carefully adjust the potentiometers labeled AIL, ELE, and RUD on the top of the unit. Start with lower sensitivity settings and gradually increase as needed during test flights to achieve desired stability without overcorrection.

4.5 Flight Mode Selection

The FC151 supports different flight modes, including auto-level and modes suitable for aerobatic/3D flying. These modes can be switched via an extra channel on your transmitter, connected to the FC151's MODE input. Consult the LED indicators for current mode status.

5. عملیات

Once installed and configured, the FC151 will provide stabilization during flight. The system continuously monitors the aircraft's attitude and makes rapid corrections to maintain stability. For advanced users, programming via the onboard button and LEDs allows for fine-tuning of parameters. Refer to the specific programming sequence detailed in the full product manual (if available) or Dualsky's official webسایت برای مراحل دقیق

Ensure your transmitter is properly calibrated and all control surfaces respond correctly before attempting flight.

6. تعمیر و نگهداری

• تمیز کردن: دستگاه را تمیز و عاری از گرد و غبار و آلودگی نگه دارید. برای تمیز کردن از یک پارچه نرم و خشک استفاده کنید.
• بازرسی: Periodically inspect all wiring connections for looseness or damage.
• شرایط محیطی: از قرار دادن دستگاه در معرض دمای شدید، رطوبت یا نور مستقیم خورشید برای مدت طولانی خودداری کنید.
• سیستم عامل: Check the Dualsky official webسایت برای هرگونه به‌روزرسانی میان‌افزار موجود.

7 عیب یابی

8. مشخصات

9. گارانتی و پشتیبانی

For warranty information, please refer to the official Dualsky website or contact your authorized Dualsky dealer. Product support and additional resources, including detailed programming guides, may be available on the manufacturer's webسایت:

www.dualsky.com/cx

For specific inquiries or technical assistance, please contact Dualsky customer service.

The GTIN/UPC for this product is 6941047114364.