مقدمه
The CRC SmartWasher BenchtopPRO is a bioremediating parts washer designed for efficient and environmentally responsible cleaning of various components. This system utilizes a water-based degreasing solution and naturally occurring microorganisms to break down oil, grease, and varnish, converting them into water and CO2. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your BenchtopPRO unit.
This product is suitable for small engine repairs, household equipment, lawnmowers, chainsaws, outdoor equipment, automotive, motorcycle, motorsports maintenance and repairs, snowmobile service, bike repair, and marine maintenance.
Image: The CRC SmartWasher BenchtopPRO unit in its closed, compact form.
اطلاعات ایمنی
Always read and understand all instructions before operating the SmartWasher BenchtopPRO. Adhere to all local safety regulations and guidelines.
- The cleaning solution is non-toxic and non-flammable. However, avoid contact with eyes. In case of eye contact, flush with water for several minutes.
- دور از دسترس کودکان نگهداری شود.
- هنگام کار، مطمئن شوید که دستگاه روی یک سطح صاف و پایدار قرار دارد.
- قطعات الکتریکی را در آب فرو نکنید.
- Disconnect power before performing any maintenance or when the unit is not in use.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Handle with care and follow all safety instructions.
آنچه در جعبه است
هنگام باز کردن بستهبندی، از وجود همه اجزا اطمینان حاصل کنید:
- BenchtopPRO Parts Washer Unit
- BT5 Concentrate Degreasing Solution (1 gallon)
- MicroPRO Pack® Packets (quantity may vary, typically a starter pack)
- Cleaning Brush with hose
- آداپتور برق
- Power Switch Cable (optional, may be integrated)
Image: The CRC SmartWasher BenchtopPRO unit, shown with the included BT5 degreasing solution and MicroPRO Packets.
دستورالعمل های راه اندازی
- بسته بندی واحد را باز کنید: Carefully remove all components from the packaging. Place the BenchtopPRO unit on a sturdy, level workbench or surface.
Image: The BenchtopPRO unit open on a workbench, ready for setup.
- برق را وصل کنید:
- Locate the AC Power Adapter and the Power Switch Cable (if separate).
- Connect the power adapter to the unit's power input port.
- If provided, connect the power switch cable between the adapter and the unit.
- Plug the AC Power Adapter into a standard electrical outlet.
Image: The AC power adapter for the BenchtopPRO unit.
Image: An optional power switch cable that can be used with the BenchtopPRO.
- محلول تمیزکننده را آماده کنید:
- Open the lid of the BenchtopPRO unit.
- Pour the entire 1-gallon bottle of BT5 Concentrate Degreasing Solution into the reservoir.
- Add 2 additional gallons of clean water to the reservoir. The total fluid volume should be approximately 3 gallons.
- Open one MicroPRO Pack® packet and sprinkle its contents into the solution. These packets contain the microbes essential for the bioremediation process.
Image: The BT5 Concentrate Degreasing Solution, a key component of the SmartWasher system.
Image: MicroPRO Packets, containing the microbes for bioremediation.
Image: A person wearing gloves adding a MicroPRO Pack to the cleaning solution in the BenchtopPRO unit.
- Attach the Cleaning Brush: Connect the cleaning brush hose to the designated port on the unit. Ensure it is securely fastened.
Image: The cleaning brush with bristles, used for scrubbing parts.
- Initial Circulation: Close the lid. Turn on the unit. Allow the solution to circulate for approximately 15-30 minutes before first use to ensure proper mixing and activation of the microbes.
دستورالعمل های عملیاتی
- روشن کردن: Ensure the unit is plugged in and turn on the power switch. The pump will begin circulating the cleaning solution.
- آماده کردن قطعات: Place the dirty parts onto the grate inside the washer. For heavily soiled parts, remove any large debris or excess grease manually before washing.
- قطعات تمیز: Use the attached cleaning brush to scrub the parts. The solution will flow through the brush, aiding in the cleaning process. For stubborn grime, allow parts to soak in the solution for a period before scrubbing.
Image: A user cleaning a bicycle chain and cassette with the BenchtopPRO parts washer.
Image: A user cleaning an engine component using the integrated brush and cleaning solution.
Image: Close-up of a user cleaning a heavily soiled engine part with the BenchtopPRO.
- شستشو: The water-based solution typically does not require rinsing. Parts can be air-dried or wiped clean after washing.
- خاموش: When finished, turn off the power switch. Close the lid to prevent evaporation and contamination.
تعمیر و نگهداری
- MicroPRO Pack® Replenishment: Add one MicroPRO Pack® packet to the solution every 30 days to maintain optimal bioremediation activity. If the unit has not been used for a month, add two packets.
- Solution Longevity: The bioremediating solution continually cleans itself. It does not need to be drained or replaced unless it becomes excessively contaminated with non-biodegradable substances or its cleaning effectiveness diminishes significantly over a long period.
- تعمیر و نگهداری فیلتر: Periodically check the filter screen (if accessible) and remove any accumulated solids to ensure proper circulation.
- تمیز کردن واحد: نمای بیرونی واحد را با تبلیغات پاک کنیدamp cloth as needed. Do not use harsh abrasives or solvents.
ذخیره سازی
The BenchtopPRO is designed for convenient storage without needing to drain the cleaning solution.
- اطمینان حاصل کنید که درب به طور ایمن بسته شده است.
- The unit can be stored vertically to save space.
Image: A person demonstrating vertical storage of the BenchtopPRO unit to save space in a workshop.
Image: The BenchtopPRO unit stored vertically, showcasing its compact footprint when not in use, with the BT5 solution and MicroPRO packs nearby.
- در جای خشک و خنک و دور از نور مستقیم خورشید نگهداری شود.
عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| پمپ کار نمی کند | No power; clogged pump; faulty switch. | Check power connection and outlet. Ensure switch is ON. Inspect pump intake for blockages. |
| عملکرد تمیز کردن ضعیف | Insufficient microbes; heavily soiled parts; old solution. | Add a MicroPRO Pack®. Pre-clean heavily soiled parts. Consider replacing solution if very old or heavily contaminated. |
| Solution leaks when stored vertically | درب محکم بسته نشده است. | Ensure the lid is firmly latched before storing the unit vertically. |
| Unpleasant odor from solution | Microbial imbalance; excessive non-biodegradable contamination. | Add a MicroPRO Pack®. Ensure proper ventilation. If odor persists, consider replacing the solution. |
مشخصات
| ویژگی | جزئیات |
|---|---|
| مدل | BenchtopPRO (1000872) |
| نام تجاری | CRC |
| مواد | پلاستیک |
| ابعاد بسته بندی | 30 x 18 x 13 اینچ |
| نوع واشر | Bioremediating Parts Washer |
| ظرفیت راه حل | Approx. 3 gallons (1 gallon concentrate + 2 gallons water) |
| منبع تغذیه | آداپتور برق |
| UPC | 649123003903 |
گارانتی و پشتیبانی
For warranty information, technical support, or to purchase replacement parts and consumables (BT5 Concentrate, MicroPRO Packs®), please visit the official CRC webبه سایت مراجعه کنید یا با بخش خدمات مشتریان آنها تماس بگیرید. رسید خرید خود را برای درخواستهای گارانتی نگه دارید.
CRC Webسایت: www.crcindustries.com