دفترچه راهنمای کاربر APC SMC1500-2UC Smart-UPS 1500VA Rackmount

1. مقدمه

This manual provides essential instructions for the safe installation, operation, and maintenance of your APC SMC1500-2UC Smart-UPS 1500VA Rackmount Uninterruptible Power Supply. The Smart-UPS is designed to provide reliable power protection for electronic equipment, safeguarding against power outages, sags, surges, and other power disturbances. Please read this manual thoroughly before installing or operating the unit.

2. اطلاعات ایمنی

هشدار: خطر برق گرفتگی یا انفجار

• این یو پی اس حاوی ولتاژ خطرناک استtages. Do not attempt to disassemble the unit. There are no user-serviceable parts inside.
• سرویس باتری ها باید توسط پرسنل آگاه در مورد باتری ها و اقدامات احتیاطی لازم انجام یا نظارت شود. پرسنل غیرمجاز را از باتری ها دور نگه دارید.
• باتری ها را در آتش دور نریزید. باتری ها ممکن است منفجر شوند.
• باتری ها را باز و یا قطعه قطعه نکنید. الکترولیت آزاد شده برای پوست و چشم مضر است. ممکن است سمی باشد.
• یو پی اس را فقط به یک پریز برق متصل کنید.
• از تهویه مناسب در اطراف UPS اطمینان حاصل کنید. منافذ تهویه را مسدود نکنید.

3. محتویات بسته

The APC SMC1500-2UC Smart-UPS package typically includes:

• APC SMC1500-2UC Smart-UPS Unit
• Documentation (User Manual, Safety Guide)
• Rackmount hardware (rails, screws)
• کابل ارتباطی USB
• کابل ارتباطی سریال

4. محصول تمام شدview

4.1 ویژگی های کلیدی

• ظرفیت: 1500 ولت آمپر / 900 وات Provides robust power backup for critical equipment.
• خروجی موج سینوسی خالص: سازگاری با قطعات الکترونیکی حساس را تضمین می‌کند.
• جلد اتوماتیکtage مقررات (AVR): Corrects minor power fluctuations without using battery power, extending battery life.
• NEMA 5-15P Input: Standard input plug for 120V power.
• (8) NEMA 5-15R Outputs: Multiple outlets for connecting protected devices.
• APC SmartConnect: Cloud-based remote monitoring feature for automatic notifications, firmware updates, and advanced support.

4.2 صفحه جلو

تصویر 1: جلو view of the APC SMC1500-2UC Smart-UPS. This image displays the front panel of the UPS, featuring the LCD screen which shows real-time status information such as input voltage and battery charge. To the right of the screen are control buttons for navigation and power management. The front also includes a ventilation grille.

The front panel features an LCD display that provides real-time status information, including input/output voltage, battery charge level, and load capacity. Control buttons allow for navigation through menus, power on/off, and alarm silencing.

4.3 پنل عقب

تصویر 2: زاویه دار view of the APC SMC1500-2UC Smart-UPS. This image provides an angled perspective of the UPS, highlighting its rackmount form factor with mounting ears visible on the sides. The front panel with its LCD and controls is also clearly visible, giving a comprehensive view of the unit's design.

The rear panel includes the NEMA 5-15P input power cord, eight NEMA 5-15R output receptacles for connected equipment, a USB port, a serial port, and an APC SmartConnect port for network monitoring.

5. راه اندازی

5.1 نصب در قفسه

The SMC1500-2UC is designed for 2U rack installation. Use the provided rackmount hardware to securely install the UPS into a standard 19-inch equipment rack. Ensure adequate space for ventilation around the unit.

5.2 Connecting to Power and Equipment

1. Connect the UPS input power cord (NEMA 5-15P) to a grounded 120V AC wall outlet. Avoid connecting to surge protectors or extension cords.
2. قبل از اولین استفاده، اجازه دهید یو پی اس حداقل ۸ ساعت شارژ شود تا از ظرفیت کامل باتری اطمینان حاصل شود.
3. Connect your critical equipment (servers, network devices, etc.) to the NEMA 5-15R output receptacles on the rear of the UPS. Ensure the total load does not exceed the UPS capacity (900W).
4. For remote monitoring, connect an Ethernet cable from your network to the APC SmartConnect port on the rear of the UPS.
5. Optionally, connect the USB or serial cable to a computer for local monitoring and management.

5.3 شروع اولیه

After connecting the UPS and allowing initial charging, press the power button on the front panel to turn on the unit. The LCD display will illuminate, and the UPS will perform a self-test. The UPS is now ready to provide protected power.

6. دستورالعمل های عملیاتی

6.1 روشن/خاموش

• روشن کردن: Press and hold the power button on the front panel until the unit beeps and the LCD illuminates.
• برای خاموش کردن: Press and hold the power button until the unit beeps and the LCD turns off. Ensure all connected equipment is safely shut down before powering off the UPS.

۵.۲ نمایشگر LCD و ناوبری

The LCD display provides real-time information. Use the navigation buttons (up/down arrows) to scroll through various screens displaying input/output voltage، درصد بارtage, battery charge, estimated runtime, and event logs. The 'Enter' button confirms selections, and the 'Escape' button returns to the previous screen.

6.3 APC SmartConnect

APC SmartConnect allows for remote monitoring of your UPS via a secure web portal. Once the UPS is connected to your network, register your device at smartconnect.apc.com. This service provides automatic notifications, firmware updates, and diagnostic support.

7. تعمیر و نگهداری

7.1 تعویض باتری

The UPS batteries are user-replaceable. Refer to the APC website or contact APC support for specific instructions and compatible replacement battery cartridges (RBCs). Always use genuine APC replacement batteries to ensure optimal performance and safety. Disconnect the UPS from all power sources before attempting battery replacement.

7.2 تمیز کردن

Periodically clean the exterior of the UPS with a soft, dry cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow and prevent overheating. Do not use liquid or aerosol cleaners directly on the unit.

8 عیب یابی

This section addresses common issues you might encounter with your APC SMC1500-2UC Smart-UPS.

• روشن نشدن یو پی اس: Ensure the input power cord is securely connected to a live, grounded outlet. Check the circuit breaker. Verify the battery is connected internally.
• UPS is beeping continuously: این اغلب نشان دهنده باتری ضعیف یا وضعیت اضافه بار است. درصد بار را بررسی کنیدtage on the LCD. If overloaded, disconnect non-essential equipment. If low battery, allow the UPS to charge.
• باتری شارژ نمی شود: Ensure the UPS is connected to a constant power source. If the issue persists after 24 hours of charging, the battery may need replacement.
• "Overload" message on LCD: The total power draw of connected equipment exceeds the UPS capacity. Disconnect some equipment immediately.
• اتصال SmartConnect برقرار نمی‌شود: Verify the Ethernet cable is properly connected to the SmartConnect port and your network. Ensure your network allows outbound connections to APC's SmartConnect service.

For more detailed troubleshooting or issues not listed here, refer to the APC support webسایت یا با پشتیبانی فنی تماس بگیرید.

9. مشخصات

10. گارانتی و پشتیبانی

۷.۱ ضمانت تمدید شده آمازون

This product is sold as an Amazon Renewed item. It is professionally inspected and tested to work and look like new. If you are not satisfied with your purchase, renewed products are eligible for replacement or refund under the ضمانت تمدید شده آمازون.

10.2 APC Support

For technical assistance, product information, or warranty inquiries related to the APC Smart-UPS, please visit the official APC website or contact APC customer support. The SmartConnect feature is free during the standard warranty period of the UPS.