APC SMT2200 Smart-UPS 2200VA 1980W 120V LCD USB Tower Backup Instruction Manual

1. محصول تمام شدview

The APC SMT2200 Smart-UPS is an Uninterruptible Power Supply (UPS) designed to provide reliable battery backup and surge protection for electronic equipment. This unit delivers 2200VA / 1980W of power, ensuring continuous operation during power outages and protecting against damaging power fluctuations. It features a pure sine wave output for compatibility with sensitive electronics and active PFC power supplies, an LCD display for status monitoring, and network manageability options.

شکل 1: جلو view of the APC SMT2200 Smart-UPS unit. This image shows the front panel with the APC logo and the Smart-UPS 2200 branding.

ویژگی های کلیدی:

• منبع تغذیه بدون وقفه (یو پی اس) باتری پشتیبان ۱۵۰۰ ولت آمپر / ۱۰۰۰ وات
• Pure Sine Wave UPS for compatibility with active PFC power supplies and electronics
• ۸ پریز برق پشتیبان و محافظ ولتاژ
• Integrated LCD Display for real-time status and configuration
• Network-grade power conditioning protects from surges and disruptive noise
• Solid state Automatic Voltage Regulation (AVR) boosts low input voltagو تریم‌های ولتاژ بالاtage without battery operation
• Network manageable via serial, USB, or optional Ethernet
• Typical recharge time: 3 hours

2. راه اندازی و نصب

2.1 باز کردن و بازرسی

Carefully unpack the UPS and inspect it for any shipping damage. If any damage is found, notify the carrier and reseller. The package should contain the UPS unit, documentation, and necessary cables.

2.2 قرار دادن

Place the UPS in a protected area free from excessive dust, corrosive fumes, and conductive contaminants. Ensure the ambient temperature is within the operating range of 32°F to 104°F (0°C to 40°C). Maintain adequate clearance around the unit for proper ventilation, especially around the rear fan.

2.3 اتصال باتری

The UPS battery may be disconnected for shipping. Refer to the specific instructions provided with your unit for connecting the internal battery. Typically, this involves rotating or pushing a battery connector into place.

2.4 تجهیزات اتصال

Connect your equipment to the appropriate outlets on the rear panel of the UPS. The SMT2200 features 8 outlets, providing both battery backup and surge protection. Ensure that the total load does not exceed the UPS's capacity of 1980W.

شکل 2: Rear panel of the APC SMT2200 Smart-UPS. This image displays the input power cord, output receptacles (NEMA 5-15R and NEMA 5-20R), USB port, serial port, and optional SmartSlot for network management cards.

• Battery Backup & Surge Protection Outlets: Connect critical equipment such as computers, monitors, and network devices to these outlets. These devices will receive power from the battery during an outage.
• برق ورودی: Connect the UPS power cord to a properly grounded 120V AC outlet.

۳.۳ شارژ اولیه باتری

Allow the UPS battery to charge for at least 3 hours before connecting any equipment or performing a self-test. This ensures maximum runtime capability.

3. عملیات

۶.۱ روشن کردن یو پی اس

Press the power button on the front panel. The LCD display will illuminate, and the UPS will perform a self-test. Once the self-test is complete, the UPS will be in Online mode, providing conditioned power to connected equipment.

۶.۲ خاموش کردن یو پی اس

To turn off the UPS and remove power from connected equipment, press and hold the power button until the unit powers down. For a controlled shutdown, ensure all connected devices are properly shut down first.

3.3 نمایشگر LCD

The LCD display provides real-time information about the UPS status, including input/output voltage، درصد بارtage, battery charge level, and estimated runtime. Use the navigation buttons on the front panel to scroll through the display menus and configure settings.

3.4 خودآزمایی

It is recommended to perform a self-test periodically to ensure the battery and internal components are functioning correctly. Refer to the LCD menu for initiating a self-test.

4. تعمیر و نگهداری

4.1 تعویض باتری

The SMT2200 uses maintenance-free sealed Lead-Acid batteries. The typical battery life is 3-5 years, but this can vary based on environmental conditions and usage. The UPS will indicate when the battery needs replacement. Always replace batteries with APC-approved replacement battery cartridges (RBC55) to ensure optimal performance and safety. Refer to the APC website or your reseller for replacement instructions.

4.2 تمیز کردن

Keep the UPS free of dust and debris. Use a dry cloth to clean the exterior. Do not use liquid cleaners or solvents. Ensure ventilation openings are clear of obstructions.

5 عیب یابی

این بخش راه‌حل‌هایی برای مشکلات رایج ارائه می‌دهد. برای مشکلات پیچیده‌تر، با پشتیبانی فنی APC تماس بگیرید.

6. مشخصات فنی

شکل 3: Part 1 of the APC SMT2200 Technical Specifications sheet, detailing output, input, and battery information.

شکل 4: Part 2 of the APC SMT2200 Technical Specifications sheet, detailing communications, surge protection, physical dimensions, environmental, and conformance information.

7. گارانتی و پشتیبانی

7.1 اطلاعات گارانتی

This APC SMT2200 Smart-UPS unit comes with a 90-day limited warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

7.2 پشتیبانی فنی

For technical assistance, troubleshooting, or warranty inquiries, please contact APC customer support. Visit the official APC webسایت برای اطلاعات تماس و منابع اضافی.