Springfield Speaker Pro-Grade Black Rubberized Speaker Repair Adhesive Glue (1/2 oz) Instruction Manual

1. محصول تمام شدview

The Springfield Speaker Pro-Grade Black Rubberized Speaker Repair Adhesive Glue is a professional-grade, hexane-based rubberized adhesive. It is specifically formulated to create a permanent, flexible bond for various speaker repair applications. This adhesive is designed to dry black, blending seamlessly with many speaker components.

Image 1.1: A 1/2 oz bottle of Springfield Speaker Pro-Grade Black Rubberized Speaker Repair Adhesive Glue.

ویژگی های کلیدی:

• Professional-grade hexane-based rubberized adhesive.
• Forms a permanent, flexible bond.
• Dries black for a discreet repair.
• Available in various sizes (1/2 oz, 1 oz, 2 oz, 4 oz, 8 oz, 16 oz).
• Includes a Yorker lid for precise application.

استفاده مورد نظر:

This adhesive is suitable for:

• Attaching cones and surrounds to speaker frames.
• Replacing or attaching foam surrounds.
• Attaching dust caps.
• Attaching gaskets.
• Repairing holes in speaker cones.

نکته مهم: This adhesive is نه for attaching voice coils.

2. اطلاعات ایمنی

This product contains hexane and is flammable. Please observe the following safety precautions:

• تهویه: برای جلوگیری از استنشاق دود، در محیطی با تهویه مناسب استفاده کنید.
• قابلیت اشتعال: Keep away from heat, sparks, open flames, and other ignition sources. Do not smoke while using this product.
• تماس پوستی: Avoid prolonged skin contact. If contact occurs, wash thoroughly with soap and water.
• تماس چشمی: در صورت تماس با چشم، فوراً با آب فراوان به مدت حداقل ۱۵ دقیقه بشویید و به پزشک مراجعه کنید.
• بلع: از خوردن آن خودداری کنید. در صورت بلع، فرد را وادار به استفراغ نکنید. فوراً به پزشک مراجعه کنید.
• ذخیره سازی: Store in a cool, dry place, away from direct sunlight and out of reach of children and pets. Keep container tightly closed when not in use.

3. راه اندازی و آماده سازی

1. جمع آوری ابزار: Ensure you have all necessary tools for your speaker repair, such as a utility knife, cleaning supplies, and any replacement parts (e.g., new foam surrounds, dust caps).
2. سطوح تمیز: Thoroughly clean all surfaces where the adhesive will be applied. Remove any old glue, debris, dust, or loose material. The surfaces must be dry and free of grease or oil for optimal adhesion.
3. Disassemble Speaker (if necessary): Carefully disassemble the speaker components as required for the repair. For surround replacement, this may involve carefully removing the old surround and potentially the dust cap to access the voice coil gap for shimming.
4. Shim Voice Coil (if necessary): If replacing surrounds, it is crucial to ensure the voice coil remains centered. Insert shims (e.g., 3x5 cards) evenly into the voice coil gap until the cone/voice coil assembly is stiff and cannot move freely. This prevents the voice coil from rubbing against the pole piece during the gluing process.
5. تهویه: Ensure your workspace is well-ventilated before opening the adhesive bottle.

4. Operating Instructions: Application Guide

Follow these steps for effective application of the speaker repair adhesive:

1. Prepare the Adhesive: Shake the bottle gently before use. Twist open the Yorker lid for precise control over the adhesive flow.
2. Apply First Layer: Apply a thin, even layer of adhesive to one of the surfaces to be joined (e.g., the speaker frame or the new surround's inner edge). For surround attachment, apply glue around the cone where the surround will sit.


Image 4.1: A hand applying the black rubberized adhesive to the edge of a speaker cone, preparing it for surround attachment.

3. Allow to Tack: Wait approximately 5 minutes for the adhesive to become tacky. This allows some solvents to evaporate, improving bond strength.
4. Apply Second Layer (Optional, for stronger bond): For critical repairs or larger surfaces, a second, slightly thicker layer can be applied after the first layer has become tacky.
5. سطوح را به هم وصل کنید: Carefully align and press the components together. For surrounds, gently pull the cone up to meet the surround, ensuring good contact. Apply even pressure around the entire joint.
6. موقعیت امن: If necessary, use clamps or weights to hold the components in place while the adhesive sets. Ensure the voice coil remains centered if shims were used.
7. زمان پخت: The adhesive will tack in approximately 5 minutes, but a full cure requires 24 ساعت. Do not apply stress or use the speaker before the full curing time has elapsed to ensure a strong, permanent bond.
8. Remove Shims (if used): After the adhesive has fully cured (24 hours), carefully remove any shims from the voice coil gap.
9. مونتاژ مجدد: Reassemble any other speaker components that were removed.

5. تعمیر و نگهداری

Adhesive Storage:

• Always replace the Yorker lid tightly after each use to prevent the adhesive from drying out.
• بطری را به صورت عمودی در جای خشک و خنک، دور از نور مستقیم خورشید و دمای شدید نگهداری کنید.
• Ensure it is stored out of reach of children and pets.

تمیز کردن:

• Clean any excess wet adhesive immediately with a suitable solvent (e.g., mineral spirits or naphtha) on a cloth. Test solvent on an inconspicuous area first.
• Once cured, the adhesive is difficult to remove without damaging the speaker components.

6 عیب یابی

7. مشخصات

Image 7.1: A range of Springfield Speaker Pro-Grade Black Rubberized Speaker Repair Adhesive Glue bottles in different sizes.

8. گارانتی و پشتیبانی

Specific warranty information for this product is not provided in the available documentation. For product support, technical assistance, or inquiries regarding your Springfield Speaker adhesive, please contact Springfield Speaker directly through their official channels or visit their brand store on Amazon:

Springfield Speaker Amazon Store

Always refer to the product packaging for the most current contact and support information.