MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch User Manual

مقدمه

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of the MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch. This device is designed for industrial networking applications, offering 8 10/100/1000BaseT PoE/PoE+ ports and 4 100/1000BaseSFP slots, capable of operating in harsh environments from -40 to 75°C.

لطفاً قبل از استفاده از دستگاه، این دفترچه راهنما را به طور کامل مطالعه کنید تا از عملکرد صحیح و ایمنی آن اطمینان حاصل کنید.

محتویات بسته

• MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch
• راهنمای نصب سریع
• کارت گارانتی
• Mounting Kit (if applicable)

Verify all items are present and undamaged. Contact your vendor if any items are missing or damaged.

راه اندازی

1. نصب فیزیکی

The EDS-G512E-8PoE-4GSFP-T switch is designed for DIN-rail or wall mounting. Ensure the installation location provides adequate ventilation and is within the specified operating temperature range (-40 to 75°C).

شکل 1: جلو view of the MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch, showing the 8 PoE ports and 4 SFP slots.

2. اتصال برق

Connect a 48 VDC power source to the terminal block on the switch. Ensure correct polarity. The switch supports redundant power inputs for enhanced reliability. Refer to the Quick Installation Guide for detailed wiring diagrams.

• حجم ورودیtage: 48 VDC
• افزونگی: Dual power inputs

3. اتصال به شبکه

Connect Ethernet cables to the 10/100/1000BaseT PoE/PoE+ ports for standard network devices and PoE-powered devices. Insert SFP modules into the 100/1000BaseSFP slots for fiber optic connections. Ensure SFP modules are compatible with the switch and your fiber infrastructure.

• پورت های PoE: 8 x 10/100/1000BaseT (PoE/PoE+)
• اسلات های SFP: 4 x 100/1000BaseSFP

عملیاتی

1. روشن کردن

Once power is connected, the switch will automatically power on. Observe the power LED indicators to confirm proper power supply.

2. شاخص های LED

The switch features various LED indicators to display its status and port activity:

• توان رآکتور ۱/توان رآکتور ۲: Indicates power status for input 1 and 2. (Green: Power OK, Off: No Power)
• عیب: Indicates system fault. (Red: Fault detected, Off: No fault)
• MSTR/CPLR: Indicates redundant ring status.
• Port LEDs (Link/Act): Indicates link status and data activity for each port. (Green: Link established, Blinking Green: Data activity, Off: No link)
• LED های PoE: Indicates PoE power status for PoE ports. (Green: PoE power supplied, Off: No PoE power)

۵.۲ مدیریت شبکه

The EDS-G512E-8PoE-4GSFP-T is a managed switch. It can be configured and monitored via a web-based interface, Telnet/SSH, or SNMP. Refer to the product's software manual for detailed instructions on accessing and configuring the management interface.

• آدرس IP پیش فرض: Consult the Quick Installation Guide or product documentation.
• نام کاربری/رمز عبور پیش فرض: Consult the Quick Installation Guide or product documentation.

تعمیر و نگهداری

1. تمیز کردن

به صورت دوره‌ای قسمت بیرونی سوئیچ را با یک پارچه نرم و خشک تمیز کنید. از پاک‌کننده‌های مایع یا آئروسل استفاده نکنید. قبل از تمیز کردن، مطمئن شوید که دستگاه خاموش است.

2. به روز رسانی سیستم عامل

مرتباً مشخصات سازنده را بررسی کنید website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware package carefully.

3. ملاحظات زیست محیطی

Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage and ensure optimal performance.

عیب یابی

1. بدون برق

• Check power cable connections to the switch and power source.
• تأیید کنید که منبع تغذیه فعال است و ولتاژ صحیح را ارائه می‌دهدtage (48 VDC).
• Check the PWR1/PWR2 LEDs on the switch.

۸.۲. عدم اتصال به شبکه

• Ensure Ethernet cables are securely connected to both the switch and the network device.
• Check the Link/Act LEDs for the respective port. A solid green indicates a link, blinking indicates activity.
• Verify network settings on connected devices.

۸.۳. روشن نشدن دستگاه PoE

• Ensure the connected device is PoE compatible.
• Check the PoE LED for the specific port. A solid green indicates PoE power is being supplied.
• Verify the total power budget of the switch is not exceeded.

4. System Fault (FAULT LED is Red)

If the FAULT LED is red, consult the product's software manual or contact technical support for advanced diagnostics.

مشخصات

گارانتی و پشتیبانی

اطلاعات گارانتی

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in the package or visit the official Moxa webبرای مشاهده شرایط و ضوابط دقیق گارانتی به سایت مراجعه کنید.

پشتیبانی فنی

For technical assistance, product documentation, or software downloads, please visit the official Moxa support website. You may also contact Moxa customer service directly for further assistance.

رسمی موکسا Webسایت: www.moxa.com