KINTO 20942 Travel Tumbler Instruction Manual

1. مقدمه

The KINTO 20942 Travel Tumbler is designed for individuals seeking a reliable and aesthetically pleasing solution for beverage transport. Featuring double-wall vacuum insulation, this tumbler maintains the temperature of your drinks, hot or cold, for extended periods. Its thoughtful design prioritizes ease of use, portability, and simple maintenance, making it suitable for daily commutes, travel, or outdoor activities.

2. اجزا

The KINTO Travel Tumbler consists of three primary components:

1. بدنه لیوان: The main insulated vessel, constructed from 18-9 stainless steel with a powder-coated finish.
2. Inner Stopper: A two-part component that screws into the tumbler body, designed to regulate liquid flow and prevent splashes. It includes a silicone gasket for a secure seal.
3. Outer Lid: The top cap that screws onto the inner stopper, providing a complete seal for transport.

۴. راه‌اندازی و اولین استفاده

3.1 تمیز کردن اولیه

Before first use, disassemble all components and wash them thoroughly with warm water and a mild detergent. Rinse completely and allow to air dry. Ensure all silicone gaskets are properly seated after cleaning to maintain the leak-proof seal.

3.2 مونتاژ

1. Ensure the inner stopper's silicone gasket is correctly positioned.
2. Screw the inner stopper firmly into the tumbler body until secure.
3. Place the outer lid onto the inner stopper and twist clockwise until it is tightly sealed. The lid features a double-helix thread design, requiring only a half to full twist for a secure closure.

4. دستورالعمل های عملیاتی

۴.۱ پر کردن لیوان

Unscrew the outer lid and the inner stopper. Pour your desired beverage into the tumbler body. Do not overfill; leave approximately 1 cm (0.4 inches) of space from the rim to allow for the inner stopper and lid. For optimal temperature retention, pre-heat the tumbler with hot water for hot beverages or pre-chill with cold water for cold beverages before filling.

۴.۳ نوشیدن از لیوان

To drink, simply unscrew the outer lid. The inner stopper is designed to regulate the flow of liquid, preventing splashes and allowing for comfortable sipping. It also acts as a barrier for ice or tea leaves, ensuring a smooth drinking experience.

۴.۴ حفظ دما

The double-wall vacuum insulation provides excellent temperature retention:

• نگهداری داغ: Over 149°F (69°C) for 6 hours.
• نگهداری سرما: Less than 15.4°F (7°C) for 6 hours.

5. نگهداری و تمیز کردن

Proper cleaning is essential to maintain the hygiene and longevity of your KINTO Travel Tumbler.

5.1 تمیز کردن روزانه

1. Disassemble all three components: tumbler body, inner stopper, and outer lid.
2. Wash each component by hand using warm water and a mild dish soap.
3. Pay special attention to the inner stopper and its silicone gasket, ensuring no residue remains. The design of the inner stopper minimizes crevices where residue can accumulate, making it easier to clean compared to traditional threaded lids.
4. تمام قسمت ها را به خوبی بشویید تا باقی مانده صابون از بین برود.
5. Allow all components to air dry completely before reassembling or storing to prevent odors and mold growth.

Important: This product is not dishwasher safe. Hand wash only.

6 عیب یابی

• نشت: If the tumbler leaks, ensure all components (inner stopper, outer lid) are screwed on tightly and that the silicone gaskets are correctly seated and free from damage or debris.
• حفظ دمای ضعیف: Verify that the inner stopper and outer lid are securely closed. Pre-heating or pre-chilling the tumbler before filling can significantly improve retention.
• بو/طعم نامطبوع: This usually indicates insufficient cleaning. Disassemble all parts and clean thoroughly, paying close attention to the silicone gaskets. A mixture of baking soda and water can help neutralize odors.

7. مشخصات

8. گارانتی و پشتیبانی

Specific warranty details for the KINTO 20942 Travel Tumbler are not provided in the available product data. For comprehensive warranty information, product support, or to inquire about replacement parts, please refer to the official KINTO website or contact KINTO customer service directly. Keep your purchase receipt as proof of purchase.