VTech 47900
VTech BM4200 Bear Baby Monitor User Manual
مدل: 47900
مقدمه
ممنون از خریدتونasing the VTech BM4200 Bear Baby Monitor. This manual provides comprehensive instructions for setting up, operating, and maintaining your new baby monitor. Please read this manual thoroughly before use to ensure proper functionality and safety.
اطلاعات مهم ایمنی
هنگام استفاده از این محصول، همیشه اقدامات احتیاطی ایمنی اولیه را رعایت کنید تا خطر آتشسوزی، برقگرفتگی و آسیبدیدگی افراد کاهش یابد، از جمله موارد زیر:
- محصول را دور از دسترس کودکان نگهداری کنید.
- Do not place the baby unit or cords within reach of the baby.
- Use only the power adapters provided with the product.
- محصول را در معرض آب یا رطوبت قرار ندهید.
- Do not install the product near any heat sources.
- از تهویه مناسب در اطراف محصول اطمینان حاصل کنید.
محتویات بسته
The VTech BM4200 package includes the following items:
- Parent Unit (x1)
- Baby Unit (Bear-shaped camera) (x1)
- Rechargeable Battery for Parent Unit (x1)
- Power Adapter for Parent Unit (x1)
- Power Adapter for Baby Unit (x1)
- پایه پایه دیواری (x1)
- Screws and Wall Anchors (x2 each)
Figure 1: VTech BM4200 Package Contents
محصول تمام شده استview
واحد والدین
The parent unit features a 4.3-inch color screen for clear video monitoring. It includes controls for volume, zoom, two-way talk, and menu navigation.
Figure 2: VTech BM4200 Parent Unit and Baby Unit
یونیت نوزاد (دوربین)
The baby unit is designed in a charming bear shape and houses the camera, microphone, speaker, and temperature sensor. It features automatic infrared night vision for clear viewدر شرایط کم نور
Figure 3: Close-up of the Bear-shaped Baby Unit
راه اندازی
۴.۱ شارژ واحد اصلی
- Connect the small end of the parent unit power adapter to the DC IN jack on the side of the parent unit.
- سر بزرگ آداپتور برق را به پریز برق وصل کنید.
- نماد باتری روی صفحه نمایش وضعیت شارژ را نشان میدهد. برای عملکرد بهینه باتری، دستگاه اصلی را قبل از اولین استفاده حداقل ۱۲ ساعت شارژ کنید.
۲. قرار دادن واحد نوزاد
- Place the baby unit in the baby's room, at least 1 meter (3 feet) away from the baby.
- Ensure the baby unit is placed on a flat surface or securely mounted to a wall using the provided bracket.
- Adjust the camera angle manually to get the best view از کودک شما
- Connect the baby unit power adapter to the DC IN jack on the back of the baby unit and plug it into a wall outlet.
3. روشن کردن
Once both units are connected to power, press and hold the قدرت button on both the parent unit and baby unit to turn them on. The units will automatically link.
دستورالعمل های عملیاتی
نظارت بر کودک شما
Once powered on and linked, the parent unit will display live video from the baby unit. The screen will show the room temperature detected by the baby unit.
بزرگنمایی دیجیتال
را فشار دهید زوم button on the parent unit to digitally zoom in or out on the video feed.
گفتگوی دو طرفه
To talk to your baby, press and hold the صحبت کنید button on the parent unit. Speak clearly into the microphone. Release the button to hear your baby.
لالایی ها
The baby unit has 5 pre-recorded lullabies. To play a lullaby, navigate to the Lullaby menu on the parent unit and select your desired tune. You can also stop playback from the parent unit.
مانیتورینگ دما
The baby unit continuously monitors the room temperature. The temperature reading is displayed on the parent unit's screen. You can set temperature alerts in the menu if the room temperature goes above or below a set range.
حالت ECO
The VTech BM4200 features an ECO mode to conserve power. When ECO mode is activated, the parent unit's screen turns off and audio transmission stops when no sound is detected from the baby unit. The system will reactivate automatically when sound is detected. This feature can be enabled or disabled in the parent unit's menu.
تعمیر و نگهداری
تمیز کردن
محصول را با d کمی تمیز کنیدamp cloth. Do not use cleaning sprays or liquid cleaners. Ensure the product is dry before reconnecting to power.
مراقبت از باتری
To prolong battery life, fully charge the parent unit before first use. If you will not be using the product for an extended period, remove the battery from the parent unit.
عیب یابی
| مشکل | راه حل |
|---|---|
| No link between parent unit and baby unit. | Ensure both units are powered on and within range. Move the parent unit closer to the baby unit. Check for interference from other electronic devices. |
| No picture on parent unit. | Check if the baby unit is powered on. Ensure the parent unit battery is charged. The screen might be off in ECO mode; make a sound near the baby unit to activate. |
| کیفیت صدای پایین یا پارازیت. | Move the parent unit closer to the baby unit. Adjust the volume. Relocate units away from other electronic devices that may cause interference. |
| Parent unit battery drains quickly. | Ensure the battery is fully charged before use. Consider using ECO mode to conserve power. Battery life naturally decreases over time. |
| خواندن دما دقیق نیست. | Ensure the baby unit is not placed near a heat source or in direct sunlight. Allow time for the sensor to adjust to the room temperature. |
مشخصات
- شماره مدل: 47900
- اندازه صفحه نمایش: 4.3 اینچ (10.9 سانتی متر)
- تکنولوژی: Digital 2.4 GHz FHSS
- محدوده: Up to 300m (open field), 50-60m (indoors)
- منبع تغذیه: AC adapter (included), Rechargeable Lithium-ion battery (parent unit)
- ویژگی های خاص: Digital Zoom, Automatic Infrared Night Vision, Two-Way Talk, Lullabies, Temperature Sensor, ECO Mode
- رنگ: سفید
گارانتی و پشتیبانی
VTech products are designed with quality and reliability in mind. For detailed warranty information or technical support, please refer to the warranty card included with your product or visit the official VTech webرسید خرید خود را به عنوان مدرک خرید نگه دارید.
For further assistance, you may also contact VTech customer service through their official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.