مقدمه
The Leviton Decora Smart Switch Companion (DD0SR-1Z) is designed for multi-location switching applications, enabling control of lights or ceiling fans from multiple wall locations. This device requires a compatible Leviton Decora Smart, Decora Digital, or Decora switch, dimmer, or fan speed control to function. It is not intended for stand-alone use.
Image: The DD0SR-1Z companion switch shown installed in a wall, emphasizing its non-standalone nature. It controls lights or a ceiling fan from another location when paired with a primary control.
اطلاعات مهم ایمنی
هشدار: To avoid fire, shock, or death; turn off power at the circuit breaker or fuse and test that power is off before wiring. Install in accordance with all National and Local Electrical Codes. This device is intended for installation in a standard wall box. Use only copper or copper clad wire. Do not use with aluminum wire. If you are unsure about any part of these instructions, consult a qualified electrician.
محتویات بسته
- One DD0SR-1Z Leviton Decora Smart Switch Companion (White)
- Ivory and Light Almond faceplates (included for color customization)
سازگاری
The DD0SR-1Z is a companion device and requires a primary Decora Smart, Decora Digital, or Decora switch, dimmer, or fan speed control to operate. It supports multi-location applications with up to 9 additional companion devices. Refer to the compatibility chart below for specific compatible primary devices.
Image: A compatibility chart detailing various Leviton Wi-Fi, Z-Wave, and Decora Digital/Decora primary devices (Dimmers, Switches, Fan Speed Controls) that can be used with the DD0SR-1Z companion.
راه اندازی و نصب
This device is designed to replace an existing 3-way switch in a multi-location setup. A neutral wire or load side wiring is required for installation. Always ensure power is off at the circuit breaker before beginning any electrical work.
مراحل نصب:
- خاموش کردن برق: قطع کننده مداری که سوئیچی را که تعویض میکنید کنترل میکند، پیدا کنید و آن را خاموش کنید. با استفاده از یک ولتمتر، از قطع بودن برق اطمینان حاصل کنید.tagتستر الکترونیکی
- حذف سوئیچ موجود: Carefully remove the wallplate and unscrew the existing switch from the wall box. Disconnect the wires, noting their connections.
- Wire the DD0SR-1Z: Connect the wires to the DD0SR-1Z according to the wiring diagram provided with your primary smart switch. A neutral wire connection is essential.
- سوئیچ را سوار کنید: Secure the DD0SR-1Z into the wall box with the provided screws.
- صفحه جلویی را وصل کنید: Snap on the desired color faceplate (white, ivory, or light almond). Additional faceplate colors (DDKIT-S) are available separately.
- بازیابی برق: برق را دوباره از طریق قطع کننده مدار وصل کنید.
Image: A diagram illustrating the process of removing and attaching faceplates for color customization, with examples of white, ivory, light almond, gray, black, and brown faceplates.
Typical multi-location applications include stairwells, long hallways, or open areas with multiple entrances, where control from more than one point is desired.
تصویر: مثالamples of common household areas where multi-location switching is beneficial, including a stairwell, a hallway, and an open-plan room.
دستورالعمل های عملیاتی
The DD0SR-1Z companion switch provides basic ON/OFF control for the connected lights or fan in conjunction with its primary smart control device.
- برای روشن کردن: را فشار دهید بالا portion of the rocker switch.
- برای خاموش کردن: را فشار دهید پایین portion of the rocker switch.
تصویر: جزئیات view of the DD0SR-1Z switch, indicating the top button for turning on and the bottom button for turning off, and noting the removable faceplate for color changes.
تعمیر و نگهداری
The Leviton Decora Smart Switch Companion requires minimal maintenance.
- تمیز کردن: دستگاه را با نرم، دamp پارچه. از پاککنندههای ساینده، حلالها یا مواد شیمیایی قوی استفاده نکنید، زیرا این مواد میتوانند به روکش یا اجزای داخلی آسیب برسانند.
- بازرسی: Periodically inspect the switch and wallplate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| Companion switch not responding | No power to the circuit; Primary smart switch not functioning; Loose wiring connection. | Check circuit breaker. Verify primary smart switch is operational. Turn off power and check all wiring connections. |
| Lights/Fan not turning ON/OFF | Companion not correctly paired/wired with primary control; Incorrect wiring. | Ensure the companion switch is correctly wired and connected to a compatible primary control device. Review نمودار سیم کشی. |
| Faceplate difficult to change | Improper technique. | Refer to the faceplate changing diagram in the Setup section. Apply gentle, even pressure. |
مشخصات
| ویژگی | جزئیات |
|---|---|
| شماره مدل | DD0SR-1Z |
| حالت عملیات | دستی |
| جلد عملیاتیtage | 120 ولت ، 60 هرتز |
| نوع تماس | به طور معمول باز است |
| نوع رابط | ترمینال پیچ |
| ابعاد (L x W x H) | 1.75 x 1.4 x 4.13 اینچ |
| وزن مورد | 3.2 اونس |
| نوع مدار | 3-way, multi-way |
| نوع محرک | سوئیچ راکر |
| دستگاه های سازگار | Leviton Decora Smart, Decora Digital, or Decora switches, dimmers, or fan speed controls |
| Color Options (Included) | White, Ivory, Light Almond |
| Material (Contact) | فولاد ضد زنگ |
گارانتی و پشتیبانی
For detailed warranty information, technical assistance, or to contact customer support, please visit the official Leviton website or refer to the documentation included with your primary smart control device. Keep your purchase receipt for warranty claims.