Wireless Remote Control Light Switch and Socket Cap User Manual

محصول تمام شده استview

The Xodus Innovations Wireless Remote Control Light Switch and Socket Cap provides a convenient solution for remotely controlling lamps and pull chain fixtures. This system consists of a mountable wall switch and a socket receiver that screws into your existing light fixture.

ویژگی های کلیدی:

• Mountable wall switch for remote operation.
• Designed for use with lamps and pull chain fixtures.
• Supports light bulbs up to 150 watts when the bulb is positioned upwards, and 60 watts maximum when positioned downwards.
• Offers a 50-foot operating range.
• Features 4 selectable channels to prevent interference and allow multiple units.
• Includes two 3-volt lithium batteries for the switch.
• فقط برای استفاده در فضای داخلی در نظر گرفته شده است.

محتویات بسته

Please ensure all items are present before beginning installation:

• 1 x Wireless Wall Switch
• 1 x Light Socket Receiver
• 2 x 3-volt Lithium Batteries (pre-installed in switch)
• Mounting Hardware (screws and double-sided tape)
• راهنمای دستورالعمل

تصویر: تمام اجزای موجود در بسته محصول.

راه اندازی و نصب

مراحل نصب:

1. Install Socket Receiver: Screw the socket receiver into your lamp or pull chain fixture. Ensure it is securely tightened.
2. نصب لامپ: Screw your light bulb into the Xodus Innovations socket receiver.
3. Affix Mounting Plate: Use the included double-sided tape or screws to secure the mounting plate for the wall switch to your desired wall location.
4. Align and Attach Switch: Place the wireless wall switch over the mounting plate, ensuring it covers it completely. Screw the switch onto the mounting plate using the included screws.
5. عملیات تست: Ensure the main power to the fixture is ON. Press the top of the wall switch to turn the light ON, and the bottom to turn it OFF.

Image: Visual guide for easy installation of the wireless light switch system.

Image: The socket receiver integrated into a pull chain fixture.

انتخاب کانال:

The system features 4 selectable channels (A, B, C, D) to prevent interference from other wireless devices and to allow for multiple units to be used in proximity. To change the channel, you will need a small screwdriver to access the dip switches located on the socket receiver and inside the wall switch. Ensure both the receiver and the switch are set to the same channel for proper operation.

Image: The wireless wall switch and socket receiver, highlighting the channel selection switches.

دستورالعمل های عملیاتی

Once installed and configured, operating your Xodus Innovations Wireless Remote Control Light Switch is straightforward:

• برای روشن کردن چراغ ON, press the upper part of the rocker switch.
• برای روشن کردن چراغ خاموش, press the lower part of the rocker switch.
• The system has an effective range of up to 50 feet, allowing control from various locations within your home.

سناریوهای استفاده

This wireless light switch system is versatile and can be used in various applications throughout your home:

• Closets: Eliminate the need for hard-to-reach pull chains in closets, providing easy light access.
• Garages or Basements: Safely turn on lights before entering dark or potentially hazardous areas.
• Table or Floor Lamps: Place the switch conveniently on a wall or side table to control lamps without needing to reach for the lamp's cord switch.

تصویر: مثالample of the wireless switch used to control a closet light.

Image: Illustrates diverse uses for the wireless light switch system in a home environment.

تعمیر و نگهداری

تعویض باتری:

The wireless wall switch is powered by two 3-volt lithium batteries (CR2032). When the switch's performance degrades or it stops responding, it may be time to replace the batteries.

1. Carefully remove the wall switch from its mounting plate.
2. Locate the battery compartment on the back of the switch.
3. Remove the old batteries and insert new CR2032 lithium batteries, ensuring correct polarity.
4. Reattach the switch to its mounting plate.

باتری های قدیمی را طبق مقررات محلی مسئولانه دور بیندازید.

عیب یابی

مشخصات

Image: Detailed dimensions of the product components.

گارانتی و پشتیبانی

اطلاعات گارانتی:

This Xodus Innovations product comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

پشتیبانی مشتری:

For technical assistance, troubleshooting, or warranty inquiries, please visit the Xodus Innovations official webبه سایت مراجعه کنید یا با بخش خدمات مشتریان آنها تماس بگیرید. برای اطلاعات تماس خاص، به بسته‌بندی محصول مراجعه کنید.