CRC 05023-12PK Battery Cleaner with Acid Indicator User Manual

1. مقدمه

The CRC 05023-12PK Battery Cleaner with Acid Indicator is designed for cleaning battery terminals, cables, and hold-downs. This product effectively removes corrosion and detects the presence of acid, turning red in contact with acid to indicate areas requiring neutralization. Regular cleaning helps maintain optimal battery performance and extends battery life.

2. اطلاعات ایمنی

Read all instructions and safety warnings before use. Failure to follow these instructions may result in injury or property damage.

• تجهیزات حفاظت فردی: Always wear appropriate personal protective equipment, including safety glasses and chemical-resistant gloves, when handling battery cleaner.
• تهویه: برای جلوگیری از استنشاق دود، در محیطی با تهویه مناسب استفاده کنید.
• قابلیت اشتعال: This product is flammable. Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
• تماس با پوست و چشم: Avoid contact with skin and eyes. In case of contact, flush immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.
• بلع: از خوردن آن خودداری کنید. در صورت بلع، فرد را وادار به استفراغ نکنید. فوراً با مرکز کنترل مسمومیت یا پزشک تماس بگیرید.
• ذخیره سازی: Store in a cool, dry place, away from direct sunlight and out of reach of children and pets.
• دفع: محتویات و ظرف را مطابق با مقررات محلی، منطقه ای، ملی و بین المللی دور بریزید.

3. محصول تمام شدview

The CRC Battery Cleaner with Acid Indicator is formulated to quickly and efficiently clean battery terminals and connections. Its unique acid indicator changes color upon contact with battery acid, providing a visual cue for effective neutralization and cleaning.

ویژگی های کلیدی:

• Instantly detects acid by changing color.
• Neutralizes acid and removes corrosion.
• Restores electrical conductivity.
• Non-abrasive formula.

4. راه اندازی و آماده سازی

1. مطمئن شوید که وسیله نقلیه خاموش است: Turn off the vehicle's engine and remove the ignition key.
2. از تجهیزات حفاظت فردی (PPE) استفاده کنید: Put on safety glasses and chemical-resistant gloves.
3. قطع کردن باتری: Disconnect the negative (-) battery cable first, followed by the positive (+) battery cable. Use an appropriate wrench.
4. باتری را بررسی کنید: Visually inspect the battery for cracks, leaks, or severe damage. Do not proceed if the battery is severely damaged.
5. قوطی تکان دهنده: Shake the CRC Battery Cleaner can well before use.

5. دستورالعمل های عملیاتی

1. کاربرد اسپری: Spray a generous amount of CRC Battery Cleaner directly onto the battery terminals, cable clamps, and battery tray where corrosion is present.
2. Acid Indication: The cleaner will turn red if battery acid is present, indicating areas that require neutralization.
3. Allow to Work: Allow the cleaner to penetrate and work for several minutes. For heavy corrosion, a brush (non-metallic) may be used to agitate the affected areas.
4. شستشو: Rinse the cleaned areas thoroughly with water. Ensure all cleaner residue is removed.
5. خشک: Dry the battery terminals and connections completely with a clean cloth or compressed air.
6. باتری را دوباره وصل کنید: Reconnect the positive (+) battery cable first, then the negative (-) battery cable. Ensure connections are tight.
7. Apply Protector (Optional): For added protection against future corrosion, consider applying a battery terminal protector after cleaning and drying.

6. نگهداری و ذخیره سازی

پس از استفاده:

• Ensure the battery area is completely dry before closing the hood or operating the vehicle.
• Clean any overspray from surrounding components immediately.

ذخیره سازی:

• Store the aerosol can in a cool, dry, well-ventilated area.
• Keep away from direct sunlight, heat sources, and ignition sources.
• Do not store at temperatures above 120°F (49°C).
• Keep the cap securely on the can when not in use.

7 عیب یابی

Issue: Cleaner does not turn red.

علت احتمالی: No battery acid is present, or the amount is negligible.

راه حل: The cleaner will still remove general corrosion. Proceed with rinsing and drying.

Issue: Corrosion remains after cleaning.

علت احتمالی: Heavy corrosion buildup or insufficient application.

راه حل: Reapply the cleaner and use a non-metallic brush to gently scrub the affected areas. Allow more dwell time before rinsing. Repeat if necessary.

Issue: Skin irritation after contact.

علت احتمالی: Direct skin exposure to the cleaner.

راه حل: Immediately wash the affected area with soap and plenty of water. If irritation persists, seek medical attention. Always wear gloves during use.

8. مشخصات

9. گارانتی و پشتیبانی

For specific warranty information or technical support regarding the CRC 05023-12PK Battery Cleaner with Acid Indicator, please contact CRC Industries directly. Refer to the product packaging or the official CRC webبرای مشاهده جدیدترین اطلاعات تماس و شرایط گارانتی به سایت مراجعه کنید.

صنایع سی آر سی
Warminster, PA
www.crcindustries.com