OSOYOO Pro Micro 5V/16MHz Module Board User Manual

1. مقدمه

This manual provides essential information for the proper setup, operation, and maintenance of your OSOYOO Pro Micro 5V/16MHz Module Board. Please read these instructions carefully before using the product to ensure optimal performance and longevity.

2. محصول تمام شدview

The OSOYOO Pro Micro is a compact microcontroller board based on the ATmega32U4. It operates at 5V/16MHz and features an on-board micro-USB connector for programming. This module is designed for various embedded projects, offering a small footprint and versatile I/O capabilities.

Figure 2.1: OSOYOO Pro Micro 5V/16MHz Module Board with included pin headers.

3. ویژگی ها

• Operating at 5V/16MHz.
• Supported under Arduino IDE v1.0.1 and later versions.
• On-Board micro-USB connector for programming and serial communication.
• 4 x 10-bit Analog-to-Digital Converter (ADC) pins.
• 12 x Digital Input/Output (I/O) pins.

Figure 3.1: Detailed pinout diagram of the OSOYOO Pro Micro module.

4. راه اندازی

To begin using your OSOYOO Pro Micro module, follow these steps for driver installation and initial setup:

1. نصب IDE آردوینو: آخرین نسخه Arduino IDE را از سایت رسمی آردوینو دانلود و نصب کنید. webسایت
2. ماژول را وصل کنید: Connect the OSOYOO Pro Micro to your computer using a data-capable micro-USB cable. Ensure the cable is not charge-only, as this will prevent data transfer and driver recognition.
3. نصب درایور:
   • Locate the Arduino driver files. These are typically found in the 'drivers' folder within your Arduino IDE installation directory. For older systems, you might need to use the 'Old_Arduino_Drivers' folder.
   • Open Device Manager (Right-click 'Computer' or 'This PC' > 'Manage' > 'Device Manager').
   • Look for 'Other devices' or 'Ports (COM & LPT)'. Your Arduino Micro might appear as an 'Unknown device' or 'Arduino Micro' with a warning sign.
   • Right-click on the device and select 'Update Driver Software'.
   • Choose 'Browse my computer for driver software' and navigate to the Arduino driver folder you located in the first step.
   • Confirm the installation if prompted by a Windows Security warning.
4. Select Board in Arduino IDE: Once drivers are installed, open the Arduino IDE. Go to ابزارها > تخته و انتخاب کنید "Arduino Leonardo". The Pro Micro is compatible with the Leonardo board definition.
5. پورت COM را انتخاب کنید: رفتن به ابزارها > پورت and select the COM port corresponding to your "Arduino Leonardo" or "Arduino/Genuino Micro" device.

5. عملیاتی

After successful setup, you can program your OSOYOO Pro Micro using the Arduino IDE. Write your code (sketch), verify it, and then upload it to the board. The ATmega32U4 microcontroller allows for direct USB communication, enabling it to act as a mouse, keyboard, or other HID devices.

To upload a sketch:

1. Open your sketch in the Arduino IDE.
2. Ensure the correct board (Arduino Leonardo) and COM port are selected under ابزار.
3. Click the 'Upload' button (right arrow icon) in the Arduino IDE. The IDE will compile the sketch and then attempt to upload it to your Pro Micro.
4. Observe the RX/TX LEDs on the board during upload, indicating data transfer.

6. تعمیر و نگهداری

The OSOYOO Pro Micro is a robust electronic component, but proper handling and care are essential for its longevity:

• تخته را تمیز و عاری از گرد و غبار و آلودگی نگه دارید.
• از قرار دادن تخته در معرض دما یا رطوبت شدید خودداری کنید.
• Handle the board by its edges to prevent static discharge damage to components.
• Ensure all connections are secure but do not apply excessive force to the micro-USB port or pin headers.

7 عیب یابی

If you encounter issues with your OSOYOO Pro Micro, consider the following common problems and solutions:

• Board Not Recognized / USB Device Not Found:
  • بررسی کنید که از a استفاده می کنید data-capable micro-USB cable. Many cables are charge-only and will not allow your computer to communicate with the board.
  • Re-check driver installation as described in Section 4. Ensure the correct drivers are installed and recognized by your operating system.
  • پورت USB دیگری را در رایانه خود امتحان کنید.
• خطاهای آپلود:
  • Confirm that "Arduino Leonardo" is selected under ابزارها > تخته.
  • Ensure the correct COM port is selected under ابزارها > پورت.
  • If the board is unresponsive after an upload attempt, you may need to manually reset it. Some users report success by quickly grounding the RST pin three times during the 'Uploading' phase in the IDE.
• Red TX LED Stays On:
  • This can sometimes occur after uploading. If it does not affect functionality, it may not be a critical issue. A software fix can be implemented by adding TEXLED0; to your sketch to turn off the LED.

8. مشخصات

Figure 8.1: Dimensions of the OSOYOO Pro Micro module.

9. گارانتی و پشتیبانی

This OSOYOO Pro Micro module is subject to a 30-day return policy from the date of purchase. For specific warranty details, technical support, or further inquiries, please refer to the official OSOYOO webسایت یا مستقیماً با خدمات مشتریان آنها تماس بگیرید. همچنین می‌توانید از OSOYOO Store on Amazon برای منابع اضافی