Leviton PJ26-TM

Leviton 1-Gang 1-Decora Midway Nylon Wallplate PJ26-TM Instruction Manual

1. مقدمه

This instruction manual provides guidance for the installation and maintenance of the Leviton 1-Gang 1-Decora Midway Nylon Wallplate, model PJ26-TM. This wall plate is designed to cover a single Decora-style electrical device, such as a switch or receptacle, and is made from durable thermoplastic nylon. Its midway size offers greater coverage than standard wall plates, helping to conceal wall surface irregularities.

Leviton 1-Gang 1-Decora Midway Nylon Wallplate in Light Almond

Figure 1: Leviton 1-Gang 1-Decora Midway Nylon Wallplate (Light Almond)

2. ویژگی های محصول

  • Midway Size: Approximately 0.375 inches taller and wider than standard wall plates, ideal for covering larger outlet boxes or minor wall imperfections.
  • مواد بادوام: Constructed from molded thermoplastic nylon for maximum resistance to impact, abrasion, fading, and discoloration.
  • تمیز کردن آسان: Features a smooth face and rounded edges that resist dust accumulation, simplifying cleaning.
  • High Abuse Resistance: Designed to withstand mechanical stress, suitable for high-traffic areas.
  • رنگ: Light Almond finish to complement various interior designs.

3. دستورالعمل نصب

3.1 اول ایمنی

هشدار: To avoid fire, shock, or death, always turn off power at the circuit breaker or fuse box before wiring. It is recommended to consult a qualified electrician if you are unsure about any part of the installation process.

3.2 ابزار مورد نیاز

  • Screwdriver (flathead or Phillips, depending on existing screws)

۶.۲ نصب گام به گام

  1. خاموش کردن برق: Locate the circuit breaker or fuse box that controls the power to the electrical device you are working on. Turn off the corresponding breaker or remove the fuse to cut off power. Verify power is off using a voltagتستر الکترونیکی
  2. حذف دیوارپوش موجود: Carefully unscrew and remove the existing wall plate from the electrical box.
  3. موقعیت صفحه دیواری جدید: Align the Leviton 1-Gang 1-Decora Midway Nylon Wallplate over the electrical device. Ensure the opening in the wall plate correctly frames the device.
  4. صفحه دیواری ایمن: Insert the provided screws into the top and bottom holes of the wall plate. Tighten the screws until the wall plate is snug against the wall. Do not overtighten, as this can damage the plate or the electrical box. The nylon material allows for slight flexibility to accommodate minor wall irregularities without cracking.
  5. بازیابی برق: Once the new wall plate is securely installed, return to the circuit breaker or fuse box and restore power to the circuit.

4. دستورالعمل های عملیاتی

The Leviton 1-Gang 1-Decora Midway Nylon Wallplate serves as a protective and aesthetic cover for a single Decora-style electrical device. Its operation is passive; it does not control the function of the device it covers. To operate the electrical device (e.g., light switch, receptacle), use the device itself as intended.

5. تعمیر و نگهداری

5.1 تمیز کردن

To clean your Leviton wall plate, simply wipe it with a soft, damp cloth. For tougher stains, a mild soap solution can be used. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish of the nylon material. Ensure the cloth is not excessively wet to prevent moisture from entering the electrical box.

6 عیب یابی

  • صفحه دیوار همسطح قرار نمی‌گیرد:
    • Ensure the electrical device (switch/receptacle) is properly seated and flush within the electrical box.
    • Check for any obstructions behind the wall plate.
    • The nylon material offers some flexibility; gently adjust the plate while tightening screws to achieve a flush fit.
  • پیچ‌ها سفت نمی‌شوند:
    • Verify that you are using the correct size screwdriver for the screws.
    • Ensure the screws are properly aligned with the threaded holes in the electrical device.
    • If the threads are stripped, the electrical device itself may need to be replaced.

7. مشخصات

Dimensions of Leviton 1-Gang 1-Decora Midway Nylon Wallplate

Figure 2: Product Dimensions (Height: 4.88", Width: 3.13")

Product Specifications - Leviton PJ26-TM
صفتارزش
نام تجاریلویتون
شماره مدلPJ26-TM
موادThermoplastic Nylon
رنگبادام سبک
تعداد باندها1
Wall Plate StyleDecora / Rocker
ارتفاع4.88 اینچ
عرض3.13 اینچ
نوع پایاننایلون
نوع نصبپیچ در
UPC078477459140

8. گارانتی و پشتیبانی

Leviton provides a manufacturer's warranty for this product. For specific warranty details, including coverage and duration, please refer to the documentation included with your purchase or visit the official Leviton webبرای پشتیبانی فنی یا کمک بیشتر، لطفاً با خدمات مشتریان Leviton تماس بگیرید.

9. اطلاعات ایمنی

هشدار: این محصول ممکن است شما را در معرض مواد شیمیایی از جمله سرب قرار دهد، که ایالت کالیفرنیا آن را عامل سرطان و نقص مادرزادی یا سایر آسیب‌های تولید مثلی می‌داند. برای اطلاعات بیشتر به www.p65warnings.ca.gov.

© 2023 Leviton Manufacturing Co., Inc. کلیه حقوق محفوظ است.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.