Behringer T1952 2-Channel Tube Compressor/Limiter User Manual

مقدمه

The Behringer T1952 is a professional 2-channel tube compressor/limiter designed to enhance audio dynamics and prevent signal clipping. This unit integrates a compressor/limiter, gate/expander, and peak limiter into a single device, offering versatile dynamic processing for studio and live applications. This manual provides essential information for the safe and effective operation of your T1952.

دستورالعمل های ایمنی

Please read and follow all safety instructions before operating the device. Retain this manual for future reference.

• منبع تغذیه: Use only the specified power adapter (9 Volts, 50 Milliamps) to avoid damage.
• آب و رطوبت: این دستگاه را در معرض باران یا رطوبت قرار ندهید. اشیاء پر از مایعات را روی دستگاه قرار ندهید.
• تهویه: تهویه کافی را تضمین کنید. منافذ تهویه را مسدود نکنید.
• منابع حرارتی: در نزدیکی هیچ منبع حرارتی مانند رادیاتور، رجیستر حرارت، اجاق گاز، یا سایر دستگاه ها (از جمله ampزنده کننده ها) که گرما تولید می کنند.
• سرویس دهی: سعی نکنید خودتان این محصول را سرویس دهید. کلیه خدمات را به پرسنل خدمات واجد شرایط ارجاع دهید.
• تمیز کردن: فقط با یک پارچه خشک تمیز کنید.

راه اندازی

1. باز کردن بسته بندی

Carefully remove the T1952 unit and all accessories from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. In case of damage, contact your dealer immediately.

2. اتصالات

The T1952 features 1/4-inch audio inputs and outputs. Ensure all connections are secure before powering on the device.

• ورودی های صوتی: Connect your audio source (e.g., microphone preamp, mixer output) to the ورودی جک‌های روی پنل پشتی.
• خروجی های صوتی: را وصل کنید خروجی jacks to your next audio device in the signal chain (e.g., mixer input, recording interface).
• اتصال برق: آداپتور برق ارائه شده را به DC IN jack on the rear panel and then to a suitable power outlet.

۴. روشن کردن اولیه

After all connections are made, switch on the T1952 using the power button. Observe the indicator lights to confirm the unit is receiving power.

عملیاتی

The T1952 offers a range of controls for dynamic processing. Familiarize yourself with each control to achieve desired audio effects.

کنترل ها به پایان رسیدview

• INPUT/OUTPUT Gain: These knobs adjust the signal level entering and exiting the unit.
• آستانه: Sets the audio level at which the compressor or gate begins to operate.
• نسبت: Determines the degree of compression applied once the threshold is exceeded.
• ATTACK/RELEASE: Control how quickly the compressor reacts to signals above the threshold (attack) and how quickly it returns to its original state once the signal falls below the threshold (release).
• عملکرد خودکار: Engages an automatic mode for attack and release times, simplifying setup for various audio sources.
• زانو: Selects between "Interactive Knee" (soft knee) and "Hard Knee" compression modes. Soft knee provides a more gradual compression curve, while hard knee offers a more abrupt transition.
• GATE/EXPANDER: Controls the noise reduction function. The gate mutes signals below the threshold, while the expander reduces their level.
• PEAK LIMITER: Prevents the audio signal from exceeding a user-defined maximum level, protecting subsequent equipment from overload.

Stereo Link Operation

The T1952 features a "True RMS stereo link" function. When activated, this links the control circuitry of both channels, ensuring that compression and gating are applied identically to both left and right channels of a stereo signal. This prevents image shifting and maintains a stable stereo field.

تعمیر و نگهداری

تمیز کردن

برای تمیز کردن دستگاه، از یک پارچه نرم و خشک استفاده کنید. از هیچ گونه پاک کننده مایع یا حلال استفاده نکنید، زیرا این مواد ممکن است به روکش یا اجزای داخلی آسیب برسانند.

ذخیره سازی

When not in use for extended periods, store the T1952 in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect the power adapter.

عیب یابی

If you encounter issues with your T1952, refer to the following common problems and solutions:

• بدون خروجی صدا:
  • تمام اتصالات کابل صدا را بررسی کنید.
  • Ensure the unit is powered on and indicator lights are active.
  • Verify input and output gain settings are not set to minimum.
  • Check if the gate/expander threshold is set too high, muting the signal.
• صدای مخدوش:
  • Reduce input gain to prevent clipping.
  • Adjust compression ratio and threshold settings.
  • Ensure connected devices are properly gain-stagویرایش
• کنترل ها پاسخ نمی دهند:
  • دستگاه را روشن کنید (خاموش، 10 ثانیه صبر کنید، روشن کنید).
  • Ensure no physical obstructions are preventing knob rotation.

اگر پس از امتحان کردن این راه‌حل‌ها مشکل همچنان ادامه داشت، لطفاً با پشتیبانی مشتریان بهرینگر تماس بگیرید.

مشخصات

گارانتی

Behringer products are covered by the manufacturer's warranty within one year of the original date of purchase from an authorized Behringer dealer. If your Behringer product is still under warranty, you must obtain a Return Authorization (RA) number from Behringer before sending your product to an authorized service center for warranty service. Please retain your proof of purchase for warranty claims.

پشتیبانی کنید

For further assistance, technical support, or service inquiries, please visit the official Behringer website or contact your local Behringer dealer. You can find contact information and additional resources on the Behringer support page.