EZVIZ C8C Outdoor Smart Wi-Fi Pan and Tilt Camera Instruction Manual
EZVIZ C8C Outdoor Smart Wi-Fi Pan and Tilt Camera

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.ezvizlife.com).

Revision Record
New release – January, 2019

Trademarks Acknowledgement

EZVIZ  and other EZVIZ’s trademarks and logos are the properties of
EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.

EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG  OTHERS. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Package Contents

  • Camera (x1)
    Package Item
  • Power Adapter (x1)
    Package Item
  • Screw Kit (x1)
    Package Item
  • Waterproof Kit (x1)
    Package Item
  • Drill Template (x1)
    Package Item
  • Regulatory Information (x1)
    Package Item
  • Quick Start Guide (x1)
    Package Item

Basics

Product Overview

Name Description
LED Indicator
  • Solid Red: Camera starting up.
  • Slow-flashing Red: Wi-Fi connection failed.
  • Fast-flashing Red: Camera exception (e.g. Micro SD card error).
  • Solid Blue: Video being live viewed in the EZVIZ app.
  • Slow-flashing Blue: Camera running properly.
  • Fast-flashing Blue: Camera ready for Wi-Fi connection.

Product Overview

Setup

Power-on

Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in the figure below.

Power-on Setup

The LED indicator turning fast-flashing blue indicates that the camera is powered on and ready for Wi-Fi configuration.

Connect to the Internet
  1. Get the EZVIZ app
    • Connect your mobile phone to Wi-Fi.
    • Download and install the EZVIZ app by searching “EZVIZ” in the App Store or Google Play StoreTM.
    • Launch the app and register an EZVIZ user account.
  2. Add camera to EZVIZ
    Option 1: Wireless Connection
    • Log in to your account using the EZVIZ app.
    • On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface.
      Wireless Connection
    • Scan the QR code on the Quick Start Guide cover or on the body of the camera.
      Wireless Connection
    • Follow the EZVIZ app wizard to finish Wi-Fi configuration.
      Option 2: Wired Connection
    • Connect the camera to the LAN port of your router with the Ethernet cable (not included in the package).
      Wired Connection
    • Log in to your account using the EZVIZ app.
    • On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface.
      Wired Connection
    • Scan the QR code on the Quick Start Guide cover or on the body of the camera.
      Wired Connection
    • Follow the wizard to add the camera to the EZVIZ app.

Installation

Install the Micro SD Card (Optional)
  • Rotate the camera counterclockwise.
  • Remove the cover on the camera.
  • Insert the micro SD card (sold separately) into the card slot as shown in the figure below.
  • Place the cover back on.
    Install the Micro SD Card
  • In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.
  • If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal and it can store videos.
Install the Camera

Important Note:

  • Make sure the wall is strong enough to withstand three times the weight of the camera.
  • The camera can be mounted on the wall, ceiling or pole.

Wall/Ceiling Mounting

  • Place drill template onto the surface you have chosen to mount the camera.
  • (For cement wall/ceiling only) Drill screw holes according to the template, and insert four anchors.
  • Use four metal screws to fix the camera base.
    Fig.1 Wall Mounting
    Wall/Ceiling Mounting
    Fig.2 Ceiling Mounting
    Wall/Ceiling Mounting

Pole Mounting

Use the cable tie (not included in the package) to fix the camera base to the pole.

Pole Mounting

Install the Waterproof Kit (Optional)

If the camera is installed outdoors or in the humid environment, please use the waterproof kit.

  • Insert the gasket into the Ethernet port of the camera.
    Install the Waterproof Kit
  • Pass the A side of the Ethernet cable through the nut, the gasket and the
    endcap.
    Install the Waterproof Kit
  • Tighten up the nut and the endcap.
    Install the Waterproof Kit
  • Insert the A side into the Ethernet port of the camera and tighten up the nut.
    Install the Waterproof Kit
  • Connect the B side with the LAN port of the router or PoE switch.
    Install the Waterproof Kit

Tips: For detailed information, please refer to www.ezviz.eu.

Regulatory Information

CE Icon This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

Dustbin Icon 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.

Dustbin Icon 2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.

EC DECLARATION OF CONFORMITY

Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [refer to the cover of the quick start guide] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link: http://www.ezvizlife.com/declaration-of-conformity

Important Safety Information

Note Icon Note: Please read the manual before using the device.
Alternating current IconAlternating current.
Direct current IconDirect current.
Instruction Book This symbol on the device indicates that the safety compatibility manual and / or installation manual must be read, which contains information related to the safe operation of the device.
Caution: Be sure to read these instructions before operating the equipment Hot Surface IconThis symbol on the device indicates that the surface or component is overheating. If you touch this surface, you may cause personal injury.
Electric Shock IconWarning: To reduce the risk of personal injury due to overheating of the components, wait until the surface cools down before touching it.
Warning: The separate earthing terminal must be permanently connected to earth.
Warning: For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV) requirements of EN/IEC 60950-1, EN/IEC 62368-1.
Caution Icon Warning: The power source should meet limited power source or PS2 requirements according to IEC/EN 60950-1 or IEC/EN 62368-1.

  • Caution: Do not block ventilation openings while the system is on, and keep at least 2 cm distance from ventilation openings and walls or other things which may block the openings.
  • Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
  • Warning: Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
  • Warning: A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  • Warning: Dispose of used batteries according to the instructions.
  • Warning: Replace only with the same or equivalent type recommended by the manufacturer.
  • Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
  • Warning: Do not ingest battery, Chemical Burn Hazard.
  • Caution: This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  • Caution: Keep new and used batteries away from children.
  • Caution: If the battery compartment does not close securely, stop using the product and keep it away from children.
  • Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  • Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
  • Warning: Do not attempt to disassemble, repair, or alter the device.
  • Warning: To avoid electric shock, please wear shoes with rubber soles. To  avoid injuries, please wear glooves when maintaining the device.
  • Warning: If you are not familiar with knowledge of cable laying and cable connection, please make sure that the power switch has been turned off before installation and maintenance.
  • Warning: If you want to disconnect the device from the power source, please unplug the DC power terminal that connects the power adapter and device.
  • Warning: Flame may spread outside and ignite nearby combustible material without front cover! Please reinstall the front cover correctly before normal operation.
  • Warning: Do not detach the front cover when the device is working properly. The front cover can only be detached when you need to restart the device. After restarting the device, please reinstall the front cover correctly before normal operation.

Use only power adapters listed in the Table.

Adapter manufacture Adapter model
Shenzhen Honor Electronic Co., Ltd ADS-12FG-12N 12012EPCU(US), ADS-12FG-12N 12012EPB(UK),
ADS-12FG-12N 12012EPG(EU), ADS-12FB-12 12012EPSA(AU)
ADS-12FG-12N 12012EPBR(BR), ADS-12FG-12N 12012EPI(IN)

A 12V1A adapter is recommended, if the power adapter is not included in the package.

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

 

Documents / Resources

EZVIZ C8C Outdoor Smart Wi-Fi Pan and Tilt Camera [pdf] Instruction Manual
CSC8C1F2, 2APV2-CSC8C1F2, 2APV2CSC8C1F2, C8C, Outdoor Smart Wi-Fi Pan and Tilt Camera

Leave a comment

Your email address will not be published.