R3 Rexus Remote Control
“
Specifications:
- Compatibility: Exway ESC 3.0 architecture
- Requires ExSkate App
- Compatible with Atlas Pro, Flex Pro, Flex Paragon, and future
Exway premium skateboards - Not compatible with X series, Flex series, Wave series, and
Atlas Carbon series skateboards - OTA firmware upgrade support
Product Description:
The Exway Rexus remote control is designed for use with Exway
premium skateboards equipped with the ESC 3.0 architecture. It
features a touch screen interface, throttle/wheel control,
interactive lighting, and various customizable settings.
Product Usage Instructions:
Operational Instructions:
Before using the remote control, ensure it is fully charged via
the charging port.
Use the directional buttons to control the skateboard’s movement
and select different gears/modes.
The light/unlock button serves multiple functions such as
activating lights, unlocking features, and returning to previous
screens.
Touch Screen Operation:
Interact with the touch screen to access menus, settings, and
control various parameters.
Speed Mode and Power Mode:
Adjust the speed and power modes according to your preference
for a customized riding experience.
Setting Page:
Access the setting page to customize lighting parameters,
skateboard settings, and remote control settings.
FAQ:
How do I update the firmware of the Exway Rexus remote?
To update the firmware, ensure your ExSkate App is up to date
and follow the on-screen instructions for OTA firmware
upgrades.
What skateboards are compatible with the Exway Rexus
remote?
The Rexus remote is compatible with Exway premium skateboards
like Atlas Pro, Flex Pro, Flex Paragon, and upcoming models. It is
not compatible with older Exway skateboard series.
“`
Exway Rexus remote control Operating instructions
km
2
km
Contents
Product Description
4
Interface Introduction
5
Operational Instructions
6
Gears/Direction Buttons
7
light/Unlock Button
8
Touch Screen Operation
9
Speed Mode
9
Power Mode
9
Setting Page
9
Lighting Parameter Settings
10
Skateboard Parameter Settings
11
2WD/4WD Switch
11
Turbo Mode
11
Max Speed Mode
11
Standby Mode
12
Drive train Types
12
Brake Force
12
Remote Control Parameter Settings
13
Accidental Throttle Input Prevention
13
Parking Mode Switch
13
Free mode
13
Cruise Control Mode
14
Gear Limit
14
Gear Change when riding
14
Remote Display Setting
15
Raise to wake
15
Screen Rotation
15
Display Brightness
15
Speed Unit Change
16
Drive Gear (Motor Pulley) Setting
16
Driven Gear (Wheel Pulley) Setting
16
Wheel Size Setting
17
2
Contents
Remote Throttle Calibration
17
Remote Control Unbind the Phone
17
Remote Control Theme Color
18
Lighting Setting
18
Light
18
Animation
18
Color
19
Brightness
19
Speed
19
Night brightness
20
Night time period starts
20
Night time period ends
20
About
21
System Version
21
Black Box
21
Firmware Updates
21
Language Setting
22
Beginner Guide
22
3
Quick keyword search If you’re viewing this manual in PDF, use the PDF reader’s keyword search to find what you’re looking for quickly.
Skip ahead with the table of contents Clicking on the sections and subsections will bring you to the selected page.
Print a hardcopy This manual can be printed for offline viewing.
Tips
Symbols
Important information to note
Learning resources
Pair the comprehensive PDF manual with our video tutorial to better understand the features and functions of the Exway Rexus remote.
Download the ExSkate app
You’ll need the ExSkate app to access the full range of features on the R3 remote. Download it from the App Store or Google Play Store to get the best experience with your R3 remote.
Requires iOS 11.0 and above.
Requires Android 6.0 and above.
The Rexus remote is not compatible with our older Exway app. Make sure to install the ExSkate app instead.
4
About Exway Rexus Remote Control
New experience upgrade The Rexus remote control comprehensively enhances the information interaction and control experience and adds motion-sensing control functions corresponding to the turn signal and raise-to-wake functions. It also adds a new information interaction light at the tail, which can convey braking, link status, and safety signal warning light function. In addition, new functions such as touchscreen quick settings, various theme colors, and taillight color customization have been added. Come and experience the next-generation electric skateboard remote control.
New software and hardware platform (compatibility)
This product is suitable for Exway ESC 3.0 architecture and needs to be used with the “ExSkate” APP. Exway Rexus remote is currently compatible with Atlas Pro, Flex Pro, Flex Paragon and future Exway premium skateboards. Not compatible with existing X series, Flex series, Wave series, and Atlas Carbon series skateboards.
improved with development!
Rexus will support OTA firmware upgrades. Please come with us to witness its revolution! Actual functions may be different from these instructions. Please refer to the latest official instructions online for details.
Meet the Exway Rexus remote control
Throttle/Wheel
Forward/ braking control Mode/Enter
Interactive Light
Charging Port (5V-1A)
Touch Screen
Unlock Light/Return
Extension Holes
Lanyard hole 5
Brand New UI Interface
Interface Description
2
km
Skateboard Battery Signal strength Direction Lighting Lamp Trip Meter
Selected Gear/Mode ODOMETER Swipe up Menu Remote Control Battery Level 2WD/4WD
Real-Time Speed/Power Ambient Light Countdown
Beginner Mode: This function is turned on by factory default. Please ride over 10km to unlock higher gears and other more functions. Double-click the real-time speed button to switch the speed unit and showing the power output. For some devices without lighting, the function icon will be displayed as “-“. Currently, only the Atlas Pro series support 4WD mode.
6
Operations Guide
Gear button/Direction button operation instructions
s
Power on/Off Power on/Off press and hold the gear button for 2 seconds
Accelerate/Brake Spin forward to
accelerate Pull back to brake
Switch Directions Slide switch to change
direction of board travel when speed <5Km/h
Switch Gears Short press once to select the
next speed mode
Turbo Mode Short press for 3 times
Tank Mode
With skateboard wheels stationary + short press twice
to engage tank mode (Speed <5km/h)
Cruise control Hold the throttle still + short press twice to activate cruise control.
(Speed = 525km/h)
*Menu callout, tank mode (four-wheel drive), parking function and other modes only take effect when the skateboard is stationary. *CRUISE Control: After this function is turned on if the speed of the board changes greater than 5km/h or the throttle wheel is operated cruise control will deactivate. *Change gear during ride: This function is turned off by default and gear can be shifted only when the skateboard is stationary.
7
Operations Guide
Light Button/Unlock Button Operation Instructions
Turn on/off the ambient light. Short press the button 1 time
s
Switch ambient light animation Short press the button 2 times
s
Turn on/ off the lighting lamp
Short press the button 3 times
Operation mode/setting menu switching Long press the
button for 2 seconds (Speed <5km/h)
N Gear
No input of throttle wheel for a period of 5 seconds will
automatically activate neutral gear mode. Push unlock
button to activate previously selected speed mode.
Left/right turn signal Tilt the remote control left/right + short press unlock button 2 times to activate it.
Parking mode
Pull the throttle wheel to the braking position while the board is stationary + short press the unlock button 2 times.
*Atlas Pro, Flex Pro and other devices do not have lighting and ambient lighting functions, so turning on the functions will have no effect. Turn signal: In the operation mode,twist your wrist and press the UNLock button twice to enter the turn signal mode and it automatically exits after 5 seconds. *UnlockAfter the anti-accidental touch function is turned on,the brake and turn signal functions are available, but the accelerator is not available.
8
Touch screen instructions
Speed mode/power mode switching
Double-tap the center of the screen: you can switch speed mode/power mode
20
W
km
km
Speed Mode
Power Mode
Enter the setting interface
Swipe up from the bottom/Swipe down from the top. Click to Exit the setting and return back.
2WD
ATIP
km
Introduction to setting interface Screen Rotation Lock Switch. Screen Brightness Switch.
2WD 2WD/4WD Switch. Accidental Throttle Input Preventon
ATIP
Switch/ATIP
ATIP ATIP:When ATIP function is turned on, the gear N will be entered when the countdown is ended.
2WD 2WD/4WD switching, it can be switched successfully only when the board selected is workable with 4WD. Screen rotation currently supports two directions. (After unlocking the screen lock, the screen is vertical to the ground for 1 second to switch)
9
Lighting Parameter Settings
Swipe right from the left edge/swipe left from the right edge to enter the settings interface Click the return button to exit the setting.
Speed
Brightness Colors
km
Introduction to setting interface Brightness Slide to adjust the brightness of the display. Colors Jump to the light color setting page.
Speed
Jump to the light speed frequency setting page.
Pairing Settings
pairing settings
1.Press and hold for 2S to enter the menu setting 2.When in 2WD mode, click “Pair” to jump to the ESC1 pairing interface
Settings Re-pair Board Remote
Select ESC ESC1 ESC2
ESC1 Re-pair
Note: After turning on the remote control pairing, you need to turn on the product ESC pairing at the same time (press and hold the skateboard’s power button for 10 seconds) Products that support 4WD mode: Atlas Pro When in 4WD mode, click “Pair”, ESC1 is the rear drive, ESC2 is the front drive, pair them separately in order.
10
Skateboard parameter settings
WD/WD Switching
Change product 2WD/4WD drive mode (only some products that support 4WD mode can be set)
Settings Re-pair Board Remote
Board 4WD Turbo mode Max Speed
Turbo Mode:
Turbo mode is the speed mode with the highest output with the most acceleration curve. To be used by experienced riders only.
Settings Re-pair Board Remote
Board 4WD Turbo mode Max Speed
Maximum speed settings
Set the maximum speed for speed modes 3 and 4.(Only applicable to gear 3 & 4)
Board 4WD Turbo mode Max Speed
Please Set the Max Speed 24~45kph
4
59
60
61
“GEAR3 / GEAR4 Set the Max speed 65km/h”t
11
Skateboard Standby Mode
Set the standby time duration. When the board is in standby mode, you don’t have to turn on the skateboard’s power button first, instead it can be turned on by the remote control straightaway.
Settings Re-pair Board Remote
Board Standby 7 Driver Typeshe Brake Level 9
Standby
7
Set Standby Days 1~7
Drive train Mode
Choose the skateboard’s drive train type. Such as belt drive, hub drive and gear drive,etc.
Settings Re-pair Board Remote
Board Standby 7 Driver Type Brake Level 9
Driver Type Belt Drivetrain Hub Drivetrain Gear Drivetrain
Braking force
Modify the braking strength. The larger the value, the greater the braking strength.
Settings Re-pair Board Remote
Board Standby 7 Driver Type Brake Force 9
Brake Force
9
Set Brake Force from 1~9
12
Remote control parameter setting (control)
ATIP
After activating the Accidental Throttle Input Prevention Switch/ATIP function the settings OFF/5S/10S/20S are available. This sets the countdown time for the remote to enter neutral speed mode. In neutral speed mode the accelerator is invalid, and only the brake will operate. When the unlock button is pressed the board will shift from neutral speed mode, to the last selected speed mode. Countdown to enter neutral speed mode will restart.
Settings Re-pair Board Remote
Remote Control Display Calibration
Control Gear N 1s Parking Mode Free Mode
Parking Mode Switch
After turning on this button, to activate parking mode, fully apply throttle wheel to full braking position then short press the ATIP button twice. In this mode the remote control will not accelerate and the board is forced to brake. To exit handbrake mode, press the ATIP button
Settings Re-pair Board Remote
Remote Control Display Calibration
Control Gear N 1s Parking Mode Free Mode
Free Mode
When free mode, the accelerator will allow the board to go in reverse after braking.
Settings Re-pair Board Remote
Remote Control Display Calibration
Control Gear N 1s Parking Mode Free Mode
13
Cruise Control mode
After enabling the cruise control function you can activate cruise control when the speed of the board is between 5-25km/h. Double click the speed mode button to activate. To deactivate apply brake or push speed mode button. (Cruise Control mode should only be activated when it is safe to do so.)
Settings Re-pair Board Remote
Remote Control Display Calibration
Control Cruise Ctrl Gear Limit OFF Shift Lock
Gear Limit
Available gear options OFF/1/2/3. This will limit the highest available gear during riding. This function should be used when allowing inexperienced riders to use the skateboard.
Settings Re-pair Board Remote
Remote Control Display Calibration
Control Cruise Ctrl Gear Limit OFF Shift Lock
Shift Lock
After enabling the speed mode shifting function, speed mode changes can be performed whilst the board is being ridden. If not enabled, the speed mode can only be changed while the skateboard is stationary
Settings Re-pair Board Remote
Remote Control Display Calibration
Control Cruise Ctrl Gear Limit OFF Shift Lock
14
Remote control parameter setting (display)
Remote raise to wake
After turning it on, when the remote control is detected to be raised, the screen will light up; when it is detected that the remote control is put down, the screen will go out.
Settings Re-pair Board Remote
Remote Control Display Calibration
Display Wake Gesture Screen Rot Brightness
Screen rotation
Screen rotation currently supports two directions. (After unlocking the screen lock, the screen is vertical to the ground for 1 second to switch)
Settings Re-pair Board Remote
Remote Control Display Calibration
Display Wake Gesture Screen Rot Brightness
Screen brightness settings
Bright and dark adjustment of screen brightness
Settings Re-pair Board Remote
Remote Control Display Calibration
Display Wake Gesture Screen Rot Brightness
15
Select units for speed display
Change the speed units km/h or mp/h
Settings Re-pair Boardt Remote
Remote Control Display Calibration
Display Unit t kph Motor Gear Wheel Gear
Drive Gear Setting
Set the motor pulley size. This is determined by the amount of teeth on the motor pulley.
Remote Control Display Calibration
Display
kph
Motor Gear
Wheel Gear
Motor Gear
14
15
16
Please Set Motor Gear 10~20T
Driven gear settings
Set the wheel pulley size. This is determined by the amount of teeth on the wheel pulley.
Remote Control Display Calibration
Display
kph
Motor Gear
Wheel Gear
Wheel Gear
55
56
57
Please Set Wheel Gear 20~80T
16
wheel diameter setting
Set the diameter to suit the wheel size.
Remote Control Display Calibration
Display Wheel Diameter
Wheel Diameter
164
165
166
Please Set Wheel Diameter
70-250mm
Remote control parameter setting (Throttle Calibration )
Throttle Calibration
To calibrate the throttle wheel, roll the throttle wheel to full throttle and press the confirm button at the same time. Repeat process for neutral postion, and again for full brake position.
Calibration
Calibration
Calibration
NEW:3239 OLD:3240
Max Throttle Press Confirm Key
NEW:1649 OLD:1650
Mid Throttle Press Confirm Key
NEW:0000 OLD:0000
Mid Throttle Press Confirm Key
Remote control parameter setting (unbinding mobile phone)
Unbinding mobile phone
The initial connection between the remote control and the mobile phone requires confirmation on the page to unbind the mobile phone before it can be searched by the APP and then bound to the new mobile phone.
Settings Re-pair Board Remote
Remote Unpair Phone Theme Color
Unpair Phone
Unpair Phone
17
Remote control parameter settings (theme color)
Theme color
Modify the theme color displayed on the Rexus remote control.
Settings Re-pair Board Remote
Remote Unpair Phone Theme Color
Theme Color
Lighting parameter settings
Lighting
Skateboard ambient light & remote control interactive warning light switch.
Settings Lighting Ohter Langrage
Lighting OnOff Light Scene Light Color
Animation
Animated mode for skateboard ambient lighting.
Settings Lighting Ohter Langrage
Lighting OnOff Light Scene Light Color
Light Scene Pulse Illuminate Bright
18
Color
Skateboard ambient light & remote control interactive warning light color.
Settings Lighting Ohter Langrage
Lighting OnOff Light Scene Light Color
Brightness
Skateboard ambient light brightness. The larger the value, the higher the brightness.
Settings Lighting Ohter Langrage
Lighting Brightness 3 Light Speed 4 Night Brightness
Brightness
3
Brightness 1-5
Speed Frequency
Skateboard ambient light speed frequency. The larger the value, the faster the beat and the shorter the period.
Settings Lighting Ohter Langrage
Lighting Brightness 3 Light Speed 4 Night Brightness
Light Speed
4
Light Speed 1-5
19
Night brightness
Alternative brightness for skateboard ambient lights at night.
Settings Lighting Ohter Langrage
Lighting Brightness 3 Light Speed 4 Night Brightness
Night Brightness
3
Night brightness setting 1-3
Night Time starts
Set the night start time, ranging from 12:00 to 23:50. When the set time is reached, the “brightness” is changed to the “night brightness” setting.
Settings Lighting Ohter Langrage
Lighting Night Begain Nignt End
Night Begain
20:00
Night Begain Connect APP to syn Time
Night Time ends
Night end time setting, ranging from 0:00~12:00, when the set time is reached, “Night Brightness” is changed to “Brightness” setting
Settings Lighting Ohter Langrage
Lighting Night Begain Nignt End
Nignt End
06:00
Night End Connect APP to syn Time
Time can be synchronized through the mobile APP. When “Night Start” If the “Night Starts” and”Night Ends”are both :, the “Night Brightness” switching function will not take effect.
20
About
System Version
System version. Check the remote control and ESC version information.
Settings Lighting Ohter Langrage
Ohter Syetem Version Driving Recode F/M Upgrade
Syetem Version
Equipment:AtlasPro LCD:1.2.00 RP1:1.2.00 ESC1: ESC2:
Black box
Save the riding data. This function will be released and achieved in the future through OTA.
Settings Lighting Ohter Langrage
Ohter Syetem Version Driving Recode F/M Upgrade
Firmware update
After downloading the update package through the APP, you can confirm and start updating the remote control and skateboard program here.
Settings Lighting Ohter Langrage
Ohter Syetem Version Driving Recode F/M Upgrade
F/M Upgrade
AtlasPro NEW: ESC1: ESC2:
LCD Module NWE:1.0.47 NOW:1.2.00
21
Language
System Language settings
System Language settings
Settings Lighting Ohter Langrage
Langrage English
Beginner’s Guide
Beginner’s Guide
Users can learn how to start skateboarding under the beginner’s guide. Some models in the guide page come with tutorial interactions for the remote control and skateboard.
Settings Newbie Guide
Safety reminder
Please wear protective gear before play
22
Documents / Resources
 | exway R3 Rexus Remote Control [pdf] Instruction Manual Rexus, R3, R3 Rexus Remote Control, R3, Rexus Remote Control, Remote Control |