ExquizOn S1 DLP Mini Portable Projector User Manual
Due to continuous improvement, actual product may different from the manual, manual is for reference only.
- Please read Manual carefully before you use the projector.
- To ensure stable power supply, please use national standard power cable and power cord with grounding.
- Please use the same power voltage as the projector marked.
- Please do not open the projector, otherwise the supplier will not afford warranty service.
- Do not look directly at the projector lens while the machine is working to avoid damage your eyes.
- To avoid clog of the projector vent, please do not cover with cloth, carpet and other materials.
- This projector does not have waterproof function, please keep it away from rain, moisture and other items containing liquid such as vase, cup, etc.
- To prevent power breakdown, please keep the projector away from rain or water or moisture.
- Turn off and cut off the power supply if do not use this project for a long time.
- Use the originally foam or other unit-shock material to protect projector, if you need transport this projector.
- If you find the projector have problems, please contact with the supplier, do not repair by yourself.
1-year warranty from factory, for more warranty information, please contact with supplier (warranty service is not including the frame, manual, package, and some subjective idea about the video, sound, image aspects).
- Signal Source
- Light on
- Manual focus
- HDMI input slot
- TF input slot
- Earphone slot
- USB input slot
- Power input
- IR receiver
Remote Control Introduction
To avoid power shortage, please don’t mixed use the old and new battery. If do not use remote control for a long time, please take the batteries out, to avoid batteries leakage corrosion. When using the remote control, please align the remote control signal transmitter to the projector’s infrared signal reception window.
Preparation before turning on.
As following picture, connect the AC power cord to port .
As following picture, the projector body will have an indicate light on after connecting the AC power cord, and the machine enters standby mode.
Power on/Power off Rotate the baffle of lens, or press’ ‘of remote control, and then projector turn on.
As the projector start working, after screen display 2 to 5 seconds of boot screen, then come into the multimedia screen.
Press’ ‘on remote control and select ‘Multi-screen’ (See below picture).
Smartphone connected with projector①
Please follow as below Installation step for Mirascreen Wire Wire+:
Step 1: Please connect IOS devices and projector by IOS USB cable as picture ①
NOTE: Support iOS 9+devices.
Step 2: Please press‘’ on remote control switch to Multi-screen mode as picture ②.
For iOS (iPhone/iPad) devices Airplay Mirroring
If the connection is right, iOS device popups a ‘Trust This Computer’ message please select ‘Trust’. Please wait for a few seconds, your iOS device screen will mirror to the screen, as picture③.
NOTE: Some iOS devices may popup ‘This accessory may not be supported’.
Please feel at ease to use, as this is a normal notification.
EZCast software installation and Firmware upgrade EZCast software installation:
Search ‘EZCast’ in the Apple App Store or scan QR code from screen to download the software.
Firmware upgrade step1: Please make sure that the projector is in Multi-screen mode, as picture②. Then please press ‘OK’ key, the screen of projector will be switched to OTA upgrade mode as picture④.
Step2: Please turn on the ‘Personal Hotspot’on iPhone for connection, as picture⑤.
Step 3: Please connect your phone to projector （refer to picture①（, you will see a message (refer to picture⑥). If it connects successfully, you will see the picture ‘ ‘ shown on your screen. If it shows an icon ‘ ‘, it means the connection failed. Please re-check from step 1 to step 3.
Step 4: Turn on EZCast app, then click the ‘firmware Upgrade’button on the menu page (refer to picture⑦) and wait for the update(refer to picture⑧).
NOTE: Please DO NOT power off or unplug your Mirascreen Wire+ power cable during upgrade and make sure your cellular data (3G/4G) is available.
Step 5: After the upgrade, click the ‘OK’ key on remote control switch to ‘Plug and Play’ mode, try the mirror function after the upgrade.
NOTE: If the MiraScreen Wire+ is abnormal due to mobile phones or tab
software upgrade, please try as above step (1 to 5)
For Android functional operation (only for MiraScreen Wire+). Please confirm if your android device supports the phone mirror function.
Step 1: Connect Android phones or pads to MiraScreen Wire+ Please refer to picture ① and follow the ‘hardware installation’ steps (1 to 2) in this manual.
NOTE: Please do not use iOS lightning cable instead of Android USB cable.
Android USB cable is needed.
- EZCast software installation for android Please download’ EZCast’ from Google play store(Android). You may also scan the QR code on projector screen for downloading.
NOTE: Supports Android 4.4 and above
NOTE: Not all Android 4.4 devices support USB Mirror.
- Android Mirror function: method 1 (USB tethering) (refer to picture ⑨):
Please launch the ‘EZCast’app, and click the ‘‘ button. After that please click the ‘Connect’ button, and then enable ‘USB tethering’. Then you may start mirroring your Android screen.
NOTE: Supports Android 5.0 and above and the audio stay on your phone.
After mirroring, please do not turn off EZCast app.
NOTE: If the MiraScreen Wire+ is abnormal due to mobile phones or tab software upgrade, please use EZCast app/Upgrade to do firmware upgrade online.
Step 2: Android Mirror function: method 2 (turn on USB debug mode):
USB Mirror mode is an alternative for supporting more Android devices (4.4 and above). Please launch the ‘EZCast’ app,—>Click the icon ‘’ —->Click the ‘Connect’ button—>open ‘USB tethering’ Click the ‘USB Mirror’ button on menu page (refer to picture⑩). Wait a second, you may start mirroring your Android screen. If ‘USB Mirror’ failed to enable, please unplug USB cable from your Android device, and then re-plug in for retry.
- NOTE: Supports Android 4.4 and above
- NOTE: USB debugging should be turned on for activating USB Mirror.
- NOTE: Not all Android 4.4 devices support USB Mirror.
- NOTE: Not all smartphone supports USB audio, and consequently the sound may come from the smartphone instead of TV/Projector.
- NOTE: Due to the EZCast app will update time to time to compatible with upto-date devices. More information about EZCast app, please refer to www.iezvu.com for reference.
Technical Support: [email protected]
Focus & keystone correction
Image focus Put the projector vertical to the projector screen or white wall, adjust the focus ‘⑦’ until the image is clearly enough, then the focus is finished. During focusing, you could display video the menu to check the focus adjust.
Projector connection introduce
Could connect multi-device and applications.
Insert the USB/TF card into the accordingly slot. (refer to picture below)
Choose multimedia signal source (factory setting USB/SD card outlet).
Multimedia Supported format
Audio file: MP3/WMA/OGG/AAC/FLAC/APE/WAV
Audio file: JPEG/BMP/PNG
Video file: 3GP (H.263, MPEG 4)/AVI (XVID, DIVX, H.264)/MKV (XVID, H.264, DIVX) /FLV(FLV)/MOV (H.234)/MP4(MPEG4, AVC)/MPG(MPEG1)/VOB (MPEG2)/MPG (MPGPS) /RMVB(RV40)/RM
Text file: TXT
Choose the content which you need display: Video, Music, Photo Text.
Choose the file which you want to display, press ‘‘ display or stop.
HDMI Equipment Connect
HDMI slot could connect to computer and all the device with HDMI slot. As connected, choose the signal source HDMI.
576P, 480P, 720P, 1080P, 640*480, 800*600, 1024*768, 1280*1024, 1280*720, 1440*900, 1920*1080, 1366*768, 1280*800, 1440*960, 1600*1200, 1680*1050
Our projector support HDMI slot and MHL cable and, connect your mobile and tablet to projector.
- Please consult your mobile’s factory or agency for this function.
- This function may be affected by device and cable.
3.5mm Audio Device Connect
Could connect 3.5mm earphone and speaker equipment’s
Notice: Due to Dolby copyright, this projector not support Dolby related decode.
6.1 Menu set
Remote control use guide: press ‘‘ key, then the main menu come out, press ‘‘ key, choose to come into the image sub-menu, press ‘‘ key, choose the key program which you want to adjust, then press ‘OK’ key into setting.
In the image, you could set the following models, such as image mode (text, video, picture, user defined), color temperature (cold hot, user defined), zoom mode (auto, 4:3, 16:9, point-to-point, panoramic, zoom1, zoom2, just scan), denoise (close, low, middle, high, tacitly approve).
Press ‘‘ key, and then get the main menu, press ‘‘ key, choose audio submenu, press ‘‘ key, choose the items which you want to adjust, then press ‘OK’ key into setting.
In the audio, you could set the sound mode (music, power, sport, user, balance (-50- +50), auto volume (open, off) surround (close, surround, SRS), balance (120Hz, 500Hz, 1.5Hz, 5kHz, 10kHz).
Press ‘‘ key on the remote control, and get the main menu, then press ‘‘ key, choose time sub-menu, press ‘‘ key, choose the items which you want to adjust, then press ‘OK’ key into setting.
key, choose time sub-menu, press ‘‘ key, choose the items which you want to adjust, then press ‘OK’ key into setting.
In the setting, set the language in menu language set, back to factory set and software upgrade.
Press ‘‘ key on the remote control, then press ‘‘ key to set sub-menu, press ‘‘ key, choose the program which need adjust, then press ‘OK’ key into setting. Set the projector language, back to factory set and software upgrade.
Display Menu Use Guide
You could control the content by the display menu.
Resolution: 854*480(Support 1080P)
Display system: 0.3’’DLP
Illuminant: R, G, B—LED
Projector Size: 15—-100 inches
Projection Ratio: 1.4
Projection Distance: 0.5M—-3M
Support: Airplay DLNA Miracast
Compatible Storage Device: USB/TF card
HD: Standard HD interface (input & output)
Headphone port: 3.5mm Stereo Jack
Power Input: 12V 1.5A
Power Output: 5V 0.5A
Power Consumption: 20W
Working Temperature: Sea level time 0°C—-35°
Projector distance & size