WiFi Door Intelligent Window Door Sensor
Specifications
- Model: WiFi Door
- Version/Date: ll. / 9. 5. 2024
- Language: EN
- Product Features:
- WiFi network support
- Scene linking
- Closing/opening warning
- Low battery warning
- Switch alert
- Inquiry about history
- Low power consumption battery-powered technology, standby for 1
year
Product Usage Instructions
About the Product
The product features an indicator light and a function key that
can be used to enter WiFi quick configuration mode.
Installation
1. Stick the device to the desired location, ensuring the
detector is installed in a fixed location like the door frame and
the magnet in an active location on the door.
2. Ensure level installation with spacing less than 15mm.
Quick Setup
1. Download the SmartLife app from the APP Store or Google Play
or scan the provided QR code.
2. Register and login using the app interface, create a new
account, and complete the WiFi configuration (select 2.4G
connection).
Technical Parameters
– Battery Type: CR2, DC3V
– Operating Voltage: 2.4~3.0V
– WiFi Frequency: 2.4 GHz
– Product Dimensions: 76x31x20mm (transmitter box), 38x12x11mm
(Magnetic strip)
FAQ
Technical Support
If you require further assistance beyond the FAQs, please
contact EVOLVEO Technical Support at: EVOLVEO Technical
Support.
Disposal
The crossed-out container symbol indicates that electrical and
electronic equipment, batteries, and accumulators should be
disposed of separately at the end of their useful life to comply
with EU regulations.
Declaration of Conformity
Abacus Electric, s.r.o. declares that the EVOLVEO WiFi Door
meets all relevant standards and regulations for this type of
equipment.
MANUAL
MODEL
VERSION / DATE
WiFi Door
ll. / 9. 5. 2024
EN
Product Features WiFi network Support scene linking; Closing/opening warning
door, low battery warning, switch alert Inquiry about history Low power consumption battery-powered technology, standby for 1 year.
2
About the product
1) Indicator light 3) Basic level
2) Function key Press and hold for 5 seconds until the red light flashes and enter WiFi quick configuration mode.
3
Indicator light (red)
Slow Lightning
Lightning fast
Enter WiFi AP connection mode
Enter WiFi fast mode
Function key: long press for 5 seconds until the red light flashes rapidly and enter WiFi fast mode; If the light is blinking slowly, enter WiFi AP connection mode.
Installation
Stick the device to the desired location (as shown in the picture, the detector should be installed in a fixed location, for example on the door frame, the magnet can be mounted in an active location, for example on the door).
4
Level installation, installation spacing less than 15 mm. Installation on the door
5
Installation on the socket Installation on the window
6
Quick setup 1) Download the app Search for “SmartLife” in the APP Store or Google Play or scan the following QR code.
7
After downloading the app, register and login by following the instructions in the interface.
Once the software is running, click the [Create New Account] button and register your account using your mobile phone number or email address.
8
2) WiFi connection
· Make sure the phone is connected to a Wi-Fi routerdual band router,
select 2.4G connection)
· Open the APP, click the [+] button in the top right corner of the home page; select [Safety Sensor]-> [Magnetic Sensor];
· Long press [Settings] for 5S The red light flashes quickly and enters the fast network connection mode; click <Confirm>, select WiFi, enter the WiFi password, and click <OK> to pair WiFi. If the red light is blinking slowly, click the compatibility mode in the upper right corner to enter the AP WiFi connection mode; click <Confirm>, select WiFi, enter WiFi password, click <OK> to pair WiFi.
· Click the confirmation button of the APP interface, select the WiFi to be connected and enter the WiFi password, click [OK] to configure WiFi; the application interface prompts to add successfully,
9
complete the WiFi configuration; if the pairing is unsuccessful, repeat. Remark: It is better to install it near the wireless router. It currently does not support 5Ghz WiFi band.
1) red light flashing/slowly flashing 2) settings
10
11
Technical parameters
Battery type Operating voltage
WiFi frequency Product dimension
CR2, DC3V 2.4~3.0V Low power alarm threshold 2.4 V 2.4 GHz
76x31x20mm (transmitter box) 38x12x11mm (Magnetic strip)
12
Technical support If the “Frequently Asked Questions” section did not help you, please contact EVOLVEO Technical Support: https://eshop.evolveo.com/helpdesk/.
Disposal The crossed-out container symbol on the product, in literature or on the packaging means that in the EU, all electrical and electronic equipment, batteries and accumulators must be put into separate waste at the end of their useful life. Do not dispose of these products in unsorted municipal waste.
Declaration of conformity Abacus Electric, s.r.o. hereby declares that the EVOLVEO WiFi Door meets the requirements of the standards and regulations applicable to this type of equipment.
13
The full text of the Declaration of Conformity can be found at http://ftp.evolveo.com/CE/. Copyright © Abacus Electric, s.r.o. www.evolveo.com www.facebook.com/EvolveoCZ Importer / Producer Abacus Electric, s.r.o. Planá 2, 370 01, Czech Republic Made in China All rights reserved. Design and specifications are subject to change without notice.
14
Documents / Resources
 | EVOLVEO WiFi Door Intelligent Window Door Sensor [pdf] User Guide WiFi Door Intelligent Window Door Sensor, Intelligent Window Door Sensor, Window Door Sensor, Door Sensor |