1006960757 Single Handle with Set Screw
Instruction Manual

1006960757 Single Handle with Set Screw

Tools Required:
Screwdriver
Allen Wrench
Optional:
Handle Puller
Single Handle with Set Screw

Installation Instructions:

1. Remove handle red & blue hole button, if present.
2. Use allen wrench to loosen the handle set screw.
3. Remove the old handle. Pry with screwdriver from both sides, to rock on and off, if needed. Use handle puller if needed.
4. Replace handle and secure with set screw. Insert red & blue hole button if present.

Single Handle with Button
Installation Instructions:

1. Remove the handle button and screw.
2. Remove the old handle. Pry with screwdriver from both sides, to rock on and off, if needed. Use handle puller if needed.
3. Replace handle and screw, then replace the button.

Handles without Buttons
Installation Instructions:

1. Remove the handle screw.
2. Remove the old handle. Pry with screwdriver from both sides, to rock on and off, if needed. Use handle puller if needed.
3. Replace handle and screw.

Documents / Resources

EVERBILT 1006960757 Single Handle with Set Screw [pdf] Instruction Manual 1006960757 Single Handle with Set Screw, 1006960757, Single Handle with Set Screw

References

• User Manual