EVENT LIGHTING BAR24X4L 24x 4W RGBW Bar with Segment Control User Manual
EVENT LIGHTING BAR24X4L 24x 4W RGBW Bar with Segment Control User Manual

Safety Instructions

Warning

  • Do not open this fixture, there is no user-serviceable parts inside. Risk of electric shock.
  • Do not look at the light source when the device is on.

Caution: This unit’s housing may become hot during and after operation.

  • Install this fixture in a location with adequate ventilation, at least 50 cm from adjacent surfaces.
  • Do not leave any flammable material within 50 cm of this unit while operating or connected to power.
  • Use a safety chain when mounting this fixture overhead.
  • Do not operate this device in any location where excessive dust, heat, water or humidity may affect it.
  • Do not operate this fixture if the housing, lenses, or cables appear damaged.
  • Do not connect this fixture to a dimmer or rheostat.
  • ONLY connect this fixture to a grounded and protected circuit.
  • ONLY use the hanging bracket to carry this fixture.
  • In case of a serious operating problem, stop using immediately.
  • The maximum ambient temperature is 40° C. Do not operate this fixture at higher temperatures.

Power Input and Power Linking

This fixture has an auto switching power supply that works with an input voltage range of 110- 240V AC, 50/60 Hz.

Link up to a maximum of 8A. Do NOT exceed this.

Product Installation

  • This fixture can be mounted in many orientations provided each individual fixture is secured by a suitable mounting bracket.
  • Use a safety chain when mounting this fixture overhead.

Menu

MenuValuesDescription
AddrA001-A512Set the DMX address.
Chnd6Ch/9Ch/16Ch/30Ch/58ChSet the DMX channel mode.
SLndnast/SL1/SL2Master/Slave 1/Slave 2 mode
SounSo0…So16 Se99…Se0Sound active mode. Adjust sound sensitivity.
AutoAu0…Au16 Sp0…Sp9Auto mode.Adjust auto run speed.
ColorCo1…Co15Select colour
nanuRed 0…255 Green 0…255 Blue 0…255White 0…255Manually adjust colour values.
DispDispDisplay settings.
VerV20Display current software version.

DMX Chart

This fixture is controlled by the universal DMX 512 protocol. The DMX address is the first channel used to receive instructions from the external controller. For independent control, each fixture must be assigned a unique address for each of its control channels. For example, this device has five channel modes: 6/9/16/30/56, if it’s set to 6 channel mode, and there are several fixtures need to be independently controlled, we just simply address first fixture at 1, and second fixture at 7, third one at 13, etc.

  • If multiple fixtures have the same DMX address, they will behave synchronically.
  • Display will flash when no DMX signal is received.
Mode/ChannelMin DMXMax DMXFunction
6Ch9Ch16 Ch30 Ch56 Ch
 1   0255Dimmer, 0-100%
 2   0255Strobe, slow to fast
13   0255Red, 0-100%
24   0255Green, 0-100%
35   0255Blue, 0-100%
46   0255White, 0-100%
 7   0255Auto Run
  1110255Section 1 Dimmer, 0-100%
  2220255Section 1 Strobe, slow to fast
  3330255Section 1 Red, 0-100%
  4440255Section 1 Green, 0-100%
  5550255Section 1 Blue, 0-100%
  6660255Section 1 White, 0-100%
  7770255Section 1 Auto Run
  8880255Section 2 Dimmer, 0-100%
  9990255Section 2 Strobe, slow to fast
  1010100255Section 2 Red, 0-100%
  1111110255Section 2 Green, 0-100%
  1212120255Section 2 Blue, 0-100%
  1313130255Section 2 White, 0-100%
  1414140255Section 2 Auto Run
   15150255Section 3 Dimmer, 0-100%
   16160255Section 3 Strobe, slow to fast
   17170255Section 3 Red, 0-100%
   18180255Section 3 Green, 0-100%
   19190255Section 3 Blue, 0-100%
   20200255Section 3 White, 0-100%
   21210255Section 3 Auto Run
   22220255Section 4 Dimmer, 0-100%
   23230255Section 4 Strobe, slow to fast
   24240255Section 4 Red, 0-100%
   25250255Section 4 Green, 0-100%
   26260255Section 4 Blue, 0-100%
   27270255Section 4 White, 0-100%
   28280255Section 4 Auto Run
    290255Section 5 Dimmer, 0-100%
    300255Section 5 Strobe, slow to fast
    310255Section 5 Red, 0-100%
    320255Section 5 Green, 0-100%
    330255Section 5 Blue, 0-100%

 

    340255Section 5 White, 0-100%
    350255Section 5 Auto Run
    360255Section 6 Dimmer, 0-100%
    370255Section 6 Strobe, slow to fast
    380255Section 6 Red, 0-100%
    390255Section 6 Green, 0-100%
    400255Section 6 Blue, 0-100%
    410255Section 6 White, 0-100%
    420255Section 6 Auto Run
    430255Section 7 Dimmer, 0-100%
    440255Section 7 Strobe, slow to fast
    450255Section 7 Red, 0-100%
    460255Section 7 Green, 0-100%
    470255Section 7 Blue, 0-100%
    480255Section 7 White, 0-100%
    490255Section 7 Auto Run
    500255Section 8 Dimmer, 0-100%
    510255Section 8 Strobe, slow to fast
    520255Section 8 Red, 0-100%
    530255Section 8 Green, 0-100%
    540255Section 8 Blue, 0-100%
    550255Section 8 White, 0-100%
    560255Section 8 Auto Run
5815295707No function
822Colour chase 1
2337Colour chase 2
3852Colour chase 3
5367Colour chase 4
6882Colour chase 5
8397Colour chase 6
98112Colour chase 7
113127Colour chase 8
128142Colour chase 9
143157Colour chase 10
158172Colour chase 11
173187Colour chase 12
188202Colour chase 13
203217Colour chase 14
218232Colour chase 15
233247Colour chase 16
248255Sound Active mode
691630580255Chase speed, slow to fast

 

Technical Specifications

  • Light Source: 24x 4W RGBW LEDs
  • Operation Modes: DMX, auto, manual, sound active, master/slave
  • Control Interface: 3-pin XLR in/out
  • DMX Channels: 6/9/16/30/58
  • Input Voltage: 110-240V AC, 50/60 Hz
  • Dimensions: 1100x150x120 mm
  • Weight: 4.5 kg

Warranty

Please contact your local dealer or contact Event Lighting.
www.event-lighting.com.au

EVENT LIGHTING logo

Documents / Resources

EVENT LIGHTING BAR24X4L 24x 4W RGBW Bar with Segment Control [pdf] User Manual
BAR24X4L 24x 4W RGBW Bar with Segment Control, BAR24X4L, 24x 4W RGBW Bar with Segment Control, Segment Control, Control

References

Leave a comment

Your email address will not be published. Required fields are marked *