eufy - Logo

QUICK START GUIDE
eufy Security Smart Lock D10

eufy D10 Security Smart Lock - cover

PRODUCT OVERVIEW

For Smart Lock Installation

eufy D10 Security Smart Lock - PRODUCT

For Keypad Installation

eufy D10 Security Smart Lock - For Keypad Installation

Required (not included)

eufy D10 Security Smart Lock - Required

COMPATIBLE DOORS

eufy D10 Security Smart Lock - COMPATIBLE

INSTALLING KEYPAD

eufy D10 Security Smart Lock - INSTALLING 1

eufy D10 Security Smart Lock - INSTALLING 2

eufy D10 Security Smart Lock - INSTALLING 3

Option 1: 3M Sticker

eufy D10 Security Smart Lock - 3M Sticker 1eufy D10 Security Smart Lock - 3M Sticker 3
eufy D10 Security Smart Lock - 3M Sticker 2eufy D10 Security Smart Lock - 3M Sticker 4

eufy D10 Security Smart Lock - 3M Sticker 5

Option 2: Expansion Bolts

eufy D10 Security Smart Lock - Expansion Bolts 1eufy D10 Security Smart Lock - Expansion Bolts 2

eufy D10 Security Smart Lock - Expansion Bolts 3

INSTALLING SMART LOCK

eufy D10 Security Smart Lock - SMART LOCK 1eufy D10 Security Smart Lock - SMART LOCK 2

If the mounting plate is not installed tightly to the door, use the screw pads provided.

eufy D10 Security Smart Lock - SMART LOCK 3

❺ Select an adapter(C) according to the cross-sectional shape and angle of the tailpiece.

eufy D10 Security Smart Lock - SMART LOCK 5

eufy D10 Security Smart Lock - SMART LOCK 6

❼ Lock and unlock to test.

eufy D10 Security Smart Lock - SMART LOCK 7

eufy D10 Security Smart Lock - SMART LOCK 8

If the smart lock is not installed tightly to the door, use the provided 3M sticker.

eufy D10 Security Smart Lock - SMART LOCK 9

eufy D10 Security Smart Lock - SMART LOCK 10

SETTING UP THE SYSTEM

  1. Download and install the eufy Security app, then sign up for an account.
    eufy D10 Security Smart Lock - SETTING UP
  2. Follow on-screen instructions to add the smart lock to your device list.
    eufy D10 Security Smart Lock - SETTING UP 2

NOTICE

Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0°C – 49°C (32°F – 120.2°F) for the lock and -10°C – 50°C (-50°F – 122°F) for the keypad.
When supplying, please place the device in an environment that has a normal room temperature and good ventilation.
It is recommended to supply the device in an environment with a temperature that ranges from 5°C – 25°C (41°F – 77°F).
This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
The equipment is only suitable for mounting at heights ≤ 2 m.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio / TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed / mobile exposure condition. The min separation distance is 20 mm.

Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973

CUSTOMER SERVICE

Warranty

12-month limited warranty
+1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00

Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,Mongkok, Kowloon, Hong Kong

@EufyOfficial
@EufyOfficial
@EufyOfficial

eufy - Logo

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.

51005002998 V01

Documents / Resources

eufy D10 Security Smart Lock [pdf] User Guide
T8591, 2AOKB-T8591, 2AOKBT8591, D10 Security Smart Lock, Security Smart Lock, Smart Lock, Lock

References

Leave a comment

Your email address will not be published. Required fields are marked *