Dokumentu

OWLLON TNS-0117 Dobe haririk gabeko Gamepad Nintendo Switch Pro kontrolagailurako erabiltzailearen eskuliburua
OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Ekoizpenaren aurkezpena:

This controller is of Bluetooth wireless type, which is mainly used with N-S console. The aisle light of the controller is assigned through the console. This product is available in motor vibration and sensor functions, and it supports the connection to PC console via USB so as to achieve PC XINPUT function

Produktuen diagrama:

Produktuen diagrama
Produktuen diagrama

Function Diagram:

Funtzioaren izena Is there a function? Oharrak
USB kable bidezko konexioa Bai  
Bluetooth konexioa Laguntzarako  
Konexio modua N-S PC mode  
Six-axis gravity induction Bai  
Giltza bat Bai  
B gakoa Bai  
X tekla Bai  
Y tekla Bai  
- giltza Bai  
+ tekla Bai  
L key Bai  
R tekla Bai  
ZL key Bai  
ZR key Bai  
Etxeko giltza Bai  
Print Screen key function Bai  
3D joystick (ezkerreko 3D joystick funtzioa) Bai  
L3 tekla (ezkerreko 3D joystick-a sakatu teklaren funtzioa) Bai  
R3 key (right 3D joystick press key function) Bai  
Cross key function Bai  
TUBRO speed regulation function Bai  
Connecting indicators Bai  
Motor vibration intensity adjustment Bai  
Kontrolagailuaren berritzea Laguntzarako  

Mode and Pairing Instruction:

  • 1. N-S wired connection mode:
    1. Before use the wired connection, please confirm the N-S console system: “set up” -> “controller and inductor” -> “wired connection of Pro controller” in “on” state.
    2. The controller is connected to the N-S base via USB cable so as to be used as the wired controller, and the corresponding indicator light of the controller will flash slowly; when you plug out the USB cable, the controller turns into wireless mode and connect the console automatically!
  • 2. N-S wireless connection mode:
    1. Before use the wireless connection, please confirm that the N-S console system turns to: “controller” -> “ change grip/order” in pairing state.
    2. Long press the code key of the controller for 3 seconds to enter into Bluetooth search mode, and the LED indicator light will flash in marquee type.
      The corresponding channel indicator light will be on after successful connection.
  • 3. PC-360, PC mode:
    Firstly, please download the PC 360 to Windows computer. After the PC 360 is installed, the controller should be connected to the computer via USB cable, and the corresponding channel indicator light will be on after successful connection. The LED2 and LED3 will be on when the No.1 and No.10 keys are pressed simultaneously to switch to PC mode.
  • 4. Back connection and shutdown instruction:
    1. Short press the Bluetooth code key to shutdown the controller.
    2. Press Home to wake up the controller. The awakened controller will automatically back connect the console which has been paired previously; it will switch to auto sleep if the back connection is not successful within 8 seconds.

Charging Indication and Charging Characteristics:

During the charging of the controller: the charging LED indicator light will be on, and it will be off after the controller is fully charged.

Lo automatikoa:

  • Connect N-S mode: the N-S console screen is off or shut down, and the controller automatically disconnects and switch to sleep mode.
  • Bluetooth connection mode: the Bluetooth disconnects and switches to sleep mode after the Bluetooth code key is pressed shortly.
  • Without any keys pressed within 5 min, it will switch to auto sleep mode (including gravitational induction immobility). Remarks: there is no auto sleep currently

TURBO Function Settings:

  • TURBO funtzioaren ezarpen erdi-automatikoa: sakatu TURBO tekla eta, ondoren, ezarri TURBO funtzio-tekla gisa behar bezala, ondoren ezarpenak behar bezala osa ditzakezu.
  • Full-automatic TURBO function setting: press TURBO key and then press the key which has been set up with the semi-automatic TURBO function.
  • Keys available for TURBO function settings: A key, B key, X key, Y key, + key, – key, L key, R key, ZL key, ZR key, “cross” key (up, down, left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
  • Garbitu ezarri diren TURBO funtzio-teklak:
    • Clear TURBO function of single key: press TURBO key + key set up with TURBO function for quick clear.
    • Shut down the automatic firing function: you should short press the – key and down arrow key once, and the controller will vibrate once to execute the command, then the automatic firing function of all keys will be turned off.
  • Regulation methods of automatic firing speed:
    • A. Increase automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been up regulated by one gear successfully.
    • B. Reduce automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been down regulated by one gear successfully.
    • C. The automatic firing function is memorable. If the console is connected after the controller is disconnected, the automatic firing speed set up previously can be memorized.

Motor Vibration Regulation:

3 gears in total: weak, intermediate and strong (the changed amplitude is 40%, 70% and 100%) regulation methods:

  • Lowest gear (40% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Intermediate gear (70% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Top gear (100% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • The intermediate gear of controller vibration is acquiescently connected for the first time, i.e. 70% amplitude.

USB Connection Function:

  • The wired N-S and PC XINPUT mode connection is supported.
  • It is automatically identified as N-S mode when connected to N-S console.
  • It is in XINPUT mode when connected to PC.

Parametro elektrikoak:

Item Erreferentzia-balioa
Lan bolumenatage DC 3.6-4.2V
Laneko unitatea 24mA
Lo egiteko korrontea 22.5uA
Bibrazio-korrontea 82 mA~130 mA
Sarrerako potentzia DC 4.5~5.5V/400mA
Bateria-ahalmena 500mAh
Funtzionamendu distantzia 10m

3D Joystick Instruction:

  • The 3D joystick is not required to be calibrated manually on N-S console. The 3D joystick will be calibrated automatically when the N-S console is plugged.
  • If the 3D joystick drips during use, please replug and unplug the controller before use. Be careful not to touch the 3D joystick when you plug and unplug the controller.

Gyroscope Calibration Instruction:

Enter into the “N-S console setting – controller and inductor – calibration of gyroscope inductor” for controller test and calibration; place the controller horizontally on the desktop and long press + or – for calibration.

Controller Upgrade Instruction:

  • If this product cannot be used due to system compatibility and other reasons, please contact the customer service provider to provide program: install the upgrade package to upgrade.
  • Specific operation: plug the controller into the computer first, then press the X+Y+HOME for 3 sec to enter into the upgrade mode; and then open the Program.exe software, click update firmware to upgrade, and wait for the prompt for successful update.

Arreta behar duten gaiak:

  • This product should be well kept when not in use.
  • Produktu hau ezin da erabili eta gorde ingurune hezeetan.
  • Produktu hau hautsak eta karga astunak saihestuz erabili edo gorde behar da bere bizitza bermatzeko.
  • Mesedez, ez erabili busti, huts egin edo hautsita dagoen eta erabilera desegoki batek eragindako errendimendu elektriko-arazoak dituen produktua.
  • Ez erabili kanpoko berogailu ekipamenduak, adibidez, mikrouhin-labeak lehortzeko.
  • Hondatuta badago, mesedez bidali mantentze-sailera bota dezan. Ez desmuntatu zuk zeuk.
  • Haurren erabiltzaileek produktu hau behar bezala erabiliko dute gurasoen gidaritzapean, eta ez dira jokoarekiko mendekotasuna izango.

FCC Kontuz

Gailu honek FCC Arauen 15. atala betetzen du. Funtzionamenduak bi baldintza hauek ditu:

  1. Gailu honek ezin du interferentzia kaltegarririk eragin eta
  2. gailu honek jasotako interferentziak onartu behar ditu, nahi ez diren eragiketak sor ditzakeen interferentziak barne.

Betetzeaz arduratzen den alderdiak berariaz onartu ez dituen aldaketak edo aldaketak erabiltzaileak ekipoa erabiltzeko baimena baliogabetu dezake.

Ohar: Ekipamendu hau probatu da eta aurkitu da B klaseko gailu digitalentzako mugak betetzen dituela, FCC Arauen 15. atalaren arabera. Muga hauek egoitza-instalazioetako interferentzia kaltegarrien aurkako arrazoizko babesa emateko diseinatuta daude.
Ekipo honek erabilerak sortzen ditu eta irrati frekuentziaren energia igorri dezake eta, jarraibideen arabera instalatu eta erabiltzen ez bada, interferentzia kaltegarriak sor ditzake irrati komunikazioetan. Hala ere, ez dago bermerik instalazio jakin batean interferentziarik gertatuko ez denik. Ekipo honek interferentzia kaltegarriak eragiten baditu irrati edo telebistako harreran, ekipoa itzalita eta piztuta zehaztu daitekeenez, erabiltzaileari interferentzia zuzentzen saiatuko da neurri hauetako bat edo gehiagoren bidez:

  • Antena hartzailea berriro orientatu edo lekuz aldatu.
  • Handitu ekipoaren eta hargailuaren arteko bereizketa.
  • Konektatu ekipoa hargailua konektatuta dagoen zirkuitu bateko hartune batera.
  • Kontsultatu saltzaileari edo esperientziadun irrati / telebistako teknikariari laguntza lortzeko.

Gailua ebaluatu da RF esposizio baldintza orokorrak betetzeko. Gailua esposizio eramangarrian erabil daiteke mugarik gabe.

Dokumentuak / Baliabideak

OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller [pdf] Erabiltzailearen eskuliburua
TNS-0117, TNS0117, 2AJJCTNS-0117, 2AJJCTNS0117, TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller, TNS-0117, Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Iruzkin bat

Zure helbide elektronikoa ez da argitaratuko.