Micron Electronics Prime LS100 LTE Tracker

Sarrera

Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency. Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol.
The WIFI function will be activated and report the MAC addresses once the device is in alerting state. The BLE function will be activated and scan the third-party BLE data or Beacon broadcast by custom setting or protocol.
RF 433MHz is used as a supervised short range RF communication link between the unit and the Base Station to determine if they are no longer in range with each other.

Produktua amaitu daview

Argazkiak, musika eta bideoak

Buttons Interface Description

Button /USB Interface Description

KEY/interface

Deskribapena

Berrezarri gakoa Power off     the Prime LS100
Egokitzaile Connected to a Power supply socket can power on Prime LS100
Funtzio tekla SOS modua
Feature Key Play to do list audios.
TEST Key Proba modua
LED deskribapena


Kopuru 1 2-

There are 3 LED lights in Prime LS100 device, the description as following.

Light Gertaera Estatuko
Function Key LED Function Key pressed Solid when pressed
Feature Key LED Feature Key pressed Solid when pressed
Test Key LED Test Key pressed Solid when pressed
Breath Light Test Key long press Breath effect

Pizten

Zatiak zerrenda

izena

Irudia

Komentarioen

Prime LS100 Base Station The LTE Base Station.
Prime LS100 adapter It used to power on the Prime LS100.
Bateria barneratua

The following items are suggestion for built-in battery usage, please pay more attention.

  • The device is Emergency call equipment, which is designed to be used by adapter always plugged.
  • There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged.

Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.

Prime LS100 Adapter

Prime LS100 base station is connected with an AC Adapter.
The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).

Piztu / itzali


Kopuru 2 2-

Power on: Plug in the power adapter and power on.
Itzali: Unplugged the power adapter and press the Reset button.

Ohar: the user can not power off Prime LS100 if the adapter is plugged.

Frequency

LTE: Band2/Band4/Band5/Band12/Band13
WIFI::2412MHz-2462MHz
BLE:2412MHz-2472MHz
433:433.92MHZ

Arazoak konpontzeko eta segurtasunari buruzko informazioa

Arazoak filmatzeko

Nahastea

Balizko arrazoia

Irtenbidea

Sare mugikorraren bidez, mezuak ezin zaizkio backend zerbitzariari jakinarazi. APN oker dago. APN batzuek ezin dute Internet zuzenean bisitatu. Eskatu sare-operadoreari APN egokia.
Backend zerbitzariaren IP helbidea edo ataka okerra da. Ziurtatu backend zerbitzariaren IP helbidea Interneten identifikatutako helbide bat dela.
Unable to power off Prime LS100. Pizteko teklaren funtzioa AT+GTFKS-ek desgaitu zuen. Gaitu pizteko teklaren funtzioa AT+GTFKS bidez.
Bateria ezin da kargatu Bateria ez da denbora gehiegi erabili eta blokeatu egin da. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help.
Segurtasun informazioa

The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime LS100 on the airplane or near medical equipment.

FCC Kontuz.

§ 15.19 Etiketatze-baldintzak.
Gailu honek FCC Arauen 15. zatia betetzen du. Gailuak interferentzia kaltegarririk ez eragiteko baldintzapean dago funtzionamendua.

§ 15.21 Erabiltzaileari informazioa.
Betetzeaz arduratzen den alderdiak berariaz onartu ez dituen aldaketak edo aldaketak erabiltzaileak ekipoa erabiltzeko baimena baliogabetu dezake.

§ 15.105 Erabiltzaileari informazioa.
Oharra: ekipamendu hau probatu da eta aurkitu da B klaseko gailu digital baten mugak betetzen dituela, FCC Arauen 15. atalaren arabera. Muga hauek egoitza-instalazioetako interferentzia kaltegarrien aurkako arrazoizko babesa emateko diseinatuta daude. Ekipo honek erabilerak sortzen ditu eta irrati frekuentziaren energia igorri dezake eta, jarraibideen arabera instalatu eta erabiltzen ez bada, interferentzia kaltegarriak sor ditzake irrati komunikazioetan. Hala ere, ez dago bermerik instalazio jakin batean interferentziarik gertatuko ez denik. Ekipo honek interferentzia kaltegarriak eragiten baditu irrati edo telebistako harreretan, ekipoa itzalita eta piztuta zehaztu daitekeenez, erabiltzaileari interferentzia zuzentzen saiatuko da neurri hauetako bat edo gehiagoren bidez:
-Antena hartzailea bideratu edo lekuz aldatu.
-Ekipoaren eta hargailuaren arteko bereizketa handitu.
-Konektatu ekipoa hargailua konektatuta dagoen zirkuitu bateko hartune batera.
-Galdetu saltzaileari edo esperientziadun irrati / telebistako teknikari bati laguntza eske.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withmin imum distance 20cm between the radiator & your body.

Dokumentuak / Baliabideak

Micron Electronics Prime LS100 LTE Tracker [pdf] Erabiltzailearen eskuliburua
BAS4GA, ZKQ-BAS4GA, ZKQBAS4GA, Prime LS100 LTE Tracker, LS100 LTE Tracker, LTE Tracker, Tracker

Iruzkin bat

Zure helbide elektronikoa ez da argitaratuko.