kvm-tec KT-6012L CPU MV1 Single Redundant In Copper Instruction Manual

kvm-tec
Lehen sorospenak
MASTERfl ex

Edukiak ezkutatu

1 KT-6012L CPU MV1 Erredundante bakarra Kobrean

2 Bidalketa edukia

3 USING THE ON SCREEN MENU

4 SISTEMAREN EGOERA

5 VIEWING THE FIRMWARE VERSION

6 PUNTUA PUNTUA

7 Dokumentuak / Baliabideak

7.1 Erreferentziak

8 Related Posts

KT-6012L CPU MV1 Erredundante bakarra Kobrean

kvm-tec Support
[posta elektroniko bidez babestua]
Telefonoa: +43 2253 81912 – 30

6012 SET
MASTERfl ex MV1 SINGLE
REDUNDANT IN COPPER
KT – 6012L CPU/LOCAL
KT – 6012R CON/REMOTE

kvm-tec
Quick
instalazioa

Bidalketa edukia

LOCAL/CPU Unit
1 x MA1 local (CPU)
1 x wall power supply! 12V 1A (1NT or EU-plug)
2 x DVI – DVI cable 1,8m/5.9ft
1 x US8 canle 1,8m/5.9ft
4 x gomazko oinak
REMOTE/CON Unit
1 x MM remote (CON)
1 x wall power supply) 12V 1A (RC orEU-plug)
4x rubber feet

Open OSO menu
The 050 main menu is opened with the standard
shortcut $ x ALT Gr
(Attention: the first 20 seconds S x Saol I always
works, in case the shortcut was forgotten.)
Switching Ilst : CTRL+ALT+PRINT
Changing the shortcuts in the 051) menu
Go to the Remote Settings and then navigate to
Teklatuko lasterbidea.

Quick Installation Masterflex Single local / CPU – remote / CON

Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply.
Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
Connect the CPU / Local and the CON / Remote Unit with a network cable.
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU Local Unit (PC-in).
Opt: Connect PC audio/out with the audio cable to local audio/in. Connect audio/out via the audio cable
Almost done! Opt: Connect the audio cable local audio/out to the PC audio/in and remote audio/out with audio cable to the microphone
Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP snooping.

HAVE FUN – your kvm-tec Extender is now in use for many years (MTBF approx 10 years)

USING THE ON SCREEN MENU

Use the monitor and keyboard to use the main menu.
To access the main menu:

Make sure the extenders, the monitors and the computer are switched on.
Press the ALT+GR key on your keyboard quickly five times.
The main menu appears with an overview of the sub-menus.
To open a sub-menu press the applicable key.

Menu nagusia

Main meu Short Cuts :
S Status Overview
U Update Flash FW
F Features Overview
D DDC Option
L Local Settings
R Remote Settings
A About Overview
L Link Redundancy
Q Irten

Menu Status /current status
Firmware eguneraketak
Settings Features
DDC Option Fix settings 1020 x 1080
Settings Local
Settings Remote
Baino gehiagoview Upgrades Upgrades

SISTEMAREN EGOERA

Dual
In the status overview menu the current status of the extender connection is displayed. It provides information on the connection itself as well as resolution of the video channel, and USBstatus. The enabled options and the current firmware-version is displayed in the left top corner. Link status shows whether there is a physical connection available. Connected indicates if kvm data is currently able to be transmitted. Video and USB show if data is currently being transmitted.

VIEWING THE FIRMWARE VERSION

Under „A“ – About the currently installed fi rmware version of the remote (CON) and local (CPU) Extender is displayed.

FEATURES MENÜ

Features Menu
P Point to Point Mode
M Matrix Switching Mode
D Freeze last Image
E USB Emulation Mode
S USB Save Feature
O Power Redundance Alert
C Diagnosis
U Unlock Features
I IP Management
L Link Redundancy Alert

Gaituta/Desgaituta
(Point to Point Point to Point excludes itself
with Matrix mode
Disabled/Enabled
(Disabled)Disabled/Enabled
(Disabled ) Disabled/Enabled
(mass storage usable) Disabled/Enabled
Alerta Sistema
Diagnosis menu
Unlock Features
IP Management
redundanter Link

PUNTUA PUNTUA

You can switch the Point to Point mode on and oﬀ by pressing the „P“ key
ARRETA – if the point to point mode is activated, the switching mode cannot be activated

MATRIX SWITCHING MODE
By pressing the „M“ button you can switch the Matrix Switching Mode oﬀ and on

KVM-TEC Gewerbepark Mitterfeld 1 A 2523 Tattendorf Austria www.kvm-tec.com	KVM-TEC ASIA p +9173573 20204 [posta elektroniko bidez babestua] KVM-TEC CHINA P + 86 1360 122 8145 [posta elektroniko bidez babestua] www.kvm-tec.com
IHSE GmbH Benzstr.1 88094 Oberteuringen Alemanian www.ihse.com	IHSE USA LLC 1 Corp.Dr.Suite Cranburry NJ 08512 USA www.ihseusa.com
IHSE GMBH Asia 158Kallang Way,#07-13A 349245 Singapur www.ihse.com	IHSE China Co.,Ltd Gela 814 Building 3, Kezhu Road Guangzhou PRC www.ihse.com.cn

Full HD
IP bidez
Check out
our Installation
Channel:

http://www.kvm-tec.com/videos/videos-installation-channel

We are here for you to answer your questions about installation? Manual download www.kvm-tec.com or kvm-tec Installationchannel on our homepage personally +43 2253 81912

www.kvm-tec.com

Dokumentuak / Baliabideak

kvm-tec KT-6012L CPU MV1 Single Redundant In Copper [pdf] Argibide eskuliburua
KT-6012L CPU MV1 Single Redundant In Copper, KT-6012L CPU, MV1 Single Redundant In Copper, Redundant In Copper, In Copper, Copper