Technology Pte GML001Z Gravio CO2 Sensor
Erabiltzaile eskuliburua
- Gravio Matrix Led sensor is a product that can display 16 by 16-pixel pictures and animations technology. It transmits pictures based on Zigbee wireless transmission technology, and at the same time, uses an stm32 microcontroller to display pictures and animations.
- Gravio Matrix Led has this very simple appearance. It has only 3 buttons, which are matching buttons, screen switches, and gravity-sensing toggle switches.
Fronte
Bikoteka botoia
Toggle switch and screen switch
Toggle Switches
When you use the Gravio matrix led, you can control whether the matrix uses gravity sensing to rotate the picture by flipping the switch. When the flipping switch is on the right, the gravity sensing is turned on. At this time, when you rotate the Gravio matrix led, the picture will be Follow the rotation, always facing up; when the toggle switch is on the left, the gravity sensor is turned off, no matter how you rotate the Gravio matrix led, the picture will not rotate
screen Switches
screen the switch can control the screen switch.
When you need to wirelessly transmit pictures to Gravio matrix led, you need to add it to the Zigbee gateway network now. When the gateway is allowed to access the network, press and hold the pair button for 5 seconds, and the Zigbee icon on the screen will flash. At this time, it will be added to the network of your gateway soon. After joining the network, the flashing Zigbee picture will be displayed. Prohibited, at this time you can transfer pictures or animations through the host computer
Network access steps: (for example we use Gravio Receiver2)
Insert Gravio receiver into pc, Mac, or Linux, open serial debugging tools, such as sscom
Typed hex：00 00 03 00 00 AA （build a network）
Go on：00 00 10 00 01 FF AA （Allow devices to connect to the network）
At this time, press and hold the button of Gravio matrix led for 5 seconds until the Zigbee icon will flash
When a gateway receives network access information,
| erantzun: |  |
When Gravio Matrix led is not normal, you can press and hold the button for 5 seconds to enter the matching network access state
send a picture
You need to copy the mac address of Gravio Matrix Led in the textbox at the bottom（mac address text box）， and click save
And you can choose an rgb （click open rgb file) file from the host computer and click send ，and few seconds it is will show on Gravio Matrix Led‘s screen
send text animations
In （please input text box）you can text less than 64bytes English alphabet and send to Gravio Matrix Led to show on the screen, you only need to type the alphabet in the text box and click send.
FCC Abisu Adierazpena
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Antena hartzailea berriro orientatu edo lekuz aldatu.
- Handitu ekipoaren eta hargailuaren arteko bereizketa.
- Konektatu ekipoa hargailua konektatuta dagoen zirkuitu bateko hartune batera.
- Laguntza lortzeko, kontsultatu saltzaileari edo esperientziadun irrati / telebistako teknikariari
Gailu honek FCC Arauen 15. atala betetzen du. Funtzionamenduak honako bi baldintza hauek ditu: (1) Gailu honek ezin du interferentzia kaltegarririk eragin, eta (2) gailuak jasotako interferentziak onartu behar ditu, nahi ez diren funtzionamenduak sor ditzakeen interferentziak barne.
FCCren RF esposizio gidalerroak betetzen direla bermatzeko, ekipo hau instalatu eta funtzionatu behar da gutxienez 20 cm-ko distantziarekin zure gorputza erradiadoretik: Erabili hornitutako antena soilik.
Dokumentuak / Baliabideak
 |
Asteria Technology Pte GML001Z Gravio CO2 Sensor [pdf] Erabiltzailearen eskuliburua GML001Z, 2AT7Z-GML001Z, 2AT7ZGML001Z, GML001Z Gravio CO2 Sensor, Gravio CO2 Sensor |
