Micron Electronics Prime LS100 LTE Trackeri kasutusjuhend

Prime LS100 LTE Tracker

LTE Tracker

Prime LS100 User Manual

Läbivaatamine: 1.00

Dokumendi pealkiri Versioon Lõppkuupäev Olek Dokumendi kontrolli ID

Prime LS100 User manual 1.00 2020-03-26 Released TRACKER Prime LS100

1

sisu
1 Introduction …………………………………………………………………………………………………………………..3 2 Product Overview…………………………………………………………………………………………………………… 3
2.1 Appearance ………………………………………………………………………………………………………….3 2.2 Buttons Interface Description …………………………………………………………………………………4 2.3 LED Description …………………………………………………………………………………………………….5 3 Getting Started……………………………………………………………………………………………………………….6 3.1 Parts List ………………………………………………………………………………………………………………6 3.2 Built-in Battery ……………………………………………………………………………………………………..6 3.3 Prime LS100 Adapter……………………………………………………………………………………………..7 3.4 Power on/Power off ………………………………………………………………………………………………8 4 Frequency………………………………………………………………………………………………………………………8 5 Trouble shooting and Safety info ………………………………………………………………………………………9 5.1 Trouble shooting …………………………………………………………………………………………………..9 5.2 Safety info…………………………………………………………………………………………………………….9
2

1 Sissejuhatus
Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency. Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol.
WIFI-funktsioon aktiveeritakse ja edastab MAC-aadressid, kui seade on hoiatusolekus. BLE-funktsioon aktiveeritakse ja skannitakse kohandatud sätte või protokolli abil kolmanda osapoole BLE-andmeid või majakat.
RF 433MHz is used as a supervised short range RF communication link between the unit and the Base Station to determine if they are no longer in range with each other.
2 Toote lõppview
2.1 Välimus
Joonis 1-1
3

2.2 Nuppude liidese kirjeldus

Nupp / USB-liidese kirjeldus

VÕTI/liides

Lähtestusvõti

Power off the Prime LS100

Kirjeldus

Adapter Function Key Feature Key

Connected to a Power supply socket can power on Prime LS100 SOS mode Play to do list audios.

TEST Key

Testrežiim

4

2.3 LED Kirjeldus

Figure 1-2 There are 3 LED lights in Prime LS100 device, the description as following.

valgus

sündmus

riik

Function Key LED Function Key pressed

Solid when pressed

Feature Key LED

Feature Key pressed

Solid when pressed

Test Key LED

Test Key pressed

Solid when pressed

Breath Light

Test Key long press

Breath effect

5

3 Alustamine

3.1 Osade loend
Name Prime LS100 Base Station

Pilt

Remark The LTE Base Station.

Prime LS100 adapter

It used to power on the Prime LS100.

3.2 Sisseehitatud aku
The following items are suggestion for built-in battery usage, please pay more attention. The device is Emergency call equipment, which is designed to be used by adapter always plugged. There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged.
Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.
6

3.3 Prime LS100 Adapter
Prime LS100 base station is connected with an AC Adapter. The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).
Joonis 2-1
7

3.4 Power on/Power off
Figure 2-2 Power on: Plug in the power adapter and power on. Power off: Unplugged the power adapter and press the Reset button.
Note: the user can not power off Prime LS100 if the adapter is plugged.
4 sagedus
LTE: Band2/Band4/Band5/Band12/Band13 WIFI::2412MHz-2462MHz BLE:2412MHz-2472MHz 433:433.92MHZ
8

5 Veaotsing ja ohutusteave
5.1 Vigade otsimine

Mobiilsidevõrk ei saa taustaserverisse veateateid teavitada.
Unable to power off Prime LS100.
Akut ei saa laadida

Possible Reason APN is wrong. Some APN can not visit the internet directly. The IP address or port of the backend server is wrong. The function of power key was disabled by AT+GTFKS. The battery has not been used for too long time and has been locked.

Lahendus Küsige võrguoperaatorilt õiget APN-i.
Veenduge, et taustaserveri IP-aadress oleks Internetis tuvastatud aadress. Toiteklahvi funktsiooni lubamine AT+GTFKS abil.
Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help.

5.2 Ohutusteave
The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime LS100 on the airplane or near medical equipment.
FCC Ettevaatust.
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
9

provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withmin imum distance 20cm between the radiator & your body.
10

Dokumendid / Ressursid

Micron Electronics Prime LS100 LTE Tracker [pdf] Kasutusjuhend
BAS4GA, ZKQ-BAS4GA, ZKQBAS4GA, Prime LS100 LTE Tracker, LS100 LTE Tracker, LTE Tracker, Tracker

Kommenteeri

Sinu e-postiaadressi ei avaldata.