Smart Projector
Attention
Please read this manual carefully before use and keep it for future reference.
1. The projector is non dustproof or waterproof.
2. In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
3. Please use the original power adapter. The projector should work under specified rated power supply.
4. When projector is working, please do not look directly into the lens; the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
5. Do not cover the vents of projector. Heating will reduce the life of projector and cause danger.
6. Regularly clean projector vents, or dust may cause cooling malfunction.
7. Do not use the projector in greasy, damp, dusty or smoky environment. Oil or chemicals will cause malfunction.
8. Please handle with care during daily use.
9. Please cut off the power if the projector is out of use for long time.
10. Non-professionals are forbidden to disassemble the projector for testing and maintenance.
Structure Description
This manual is for reference only. It is subject to change without prior notice. Hotack reserves the right of final interpretation.
Projector Ports and Controls
ON/OFF Button: [Power Button]
Headset Jack: For audio output.
HDMI Port: For video and audio input.
USB Port: For data transfer or power.
Air Inlet: For ventilation.
Vent: For heat dissipation.
Focus Wheel
Adjusts the focus of the projected image.
Lens
The optical component that projects the image.
Remote Component and Functions
Power Button: [Power Button]
MUTE: Mutes or unmutes audio.
Switch to mouse control: Toggles mouse cursor mode.
DIRECTIONS: Navigation buttons (Up, Down, Left, Right).
OK Button: Confirms selection.
RETURN Button: Goes back to the previous screen.
MENU Button: Opens the main menu.
HOME Button: Returns to the home screen.
VOL+/- Buttons: Adjusts volume.
ROTATE Button: Likely for screen orientation.
Miracast Button: Activates Miracast screen mirroring.
Airpin Button: Activates Airpin (likely for Airplay/DLNA).
Quick Installation Guide
Settings Menu
Access the main settings menu to configure various aspects of the projector.
Networking Setting
Description: Configure network connections.
Steps: Navigate to Settings > Networking Setting. Turn Wi-Fi ON, select the desired Wi-Fi ID, and input the password to connect to the internet. Options include Refresh Wi-Fi.
Bluetooth Setting
Description: Connect Bluetooth devices.
Steps: Navigate to Settings > Bluetooth Setting. Turn Bluetooth ON, click Refresh Device, and choose the desired device to pair.
Language Setting
Description: Set the projector's language and input method.
Steps: Navigate to Settings > Language Setting, enter to set the language and select the input method. English (En) is an example option.
Projection Setting
Description: Adjust projection parameters.
Steps: Navigate to Settings > Projector Setting. Configure projection mode, keystone correction, and brightness.
Audio Setting
Description: Adjust audio volume.
Steps: Navigate to Settings > Audio Setting to adjust the volume.
Date And Time Setting
Description: Set the projector's date and time.
Steps: Navigate to Settings > Date And Time Setting to set the timezone, time format, date format, date, and time.
Other Setting
Description: Access advanced settings.
Steps: Navigate to Settings > Other Setting to access Application settings, Factory Reset, and Developer options.
Signal Input
Description: Select input source.
Steps: After connecting an output device, select HDMI or Audio/Video as the input signal.
Wireless Projection
Miracast
Description: Wirelessly mirror your Android device screen.
Requirements: Ensure Android devices (phone, tablet, etc.) are on the same local wireless LAN as the projector.
Steps: On the projector, navigate to Home Screen > My Apps > Miracast. Open the Miracast service. On your Android device, turn on phone mirroring and establish a connection.
Airplay
Description: Wirelessly mirror your Apple device screen.
Requirements: Ensure Apple devices (iPhone, iPad, etc.) are on the same local wireless LAN as the projector.
Steps: On the projector, navigate to Home Screen > My Apps > Airpin. Open the Airpin service. On your iPhone, turn on phone mirroring and establish a connection.
Easy Projection / Wireless Projection
Description: General terms for wireless screen sharing.
Safety Instructions
Please pay attention to important information related to the operation and maintenance of the projector. Read this information carefully to avoid problems. Following these instructions will increase the life of the projector.
• Please consult qualified personnel for installation and repair services, and do not use damaged wires, accessories, or other peripherals.
• Projector should be kept away from flammable, explosive, strong electromagnetic interference (large radar stations, power stations, substations), etc. Avoid strong ambient light (direct sunlight).
• Do not cover projector vents.
• Please use the original power adapter.
• Keep adequate ventilation and ensure vents are not covered to avoid projector overheating.
• When the projector is working, please do not look directly into the lens; the strong light will flash your eyes and cause slight pain.
• Do not bend or drag the power cord.
• Do not place the power cord under the projector or any heavy objects.
• Do not cover the power cord with other soft materials.
• Do not heat the power cord.
• Avoid touching the power adapter with wet hands.
Disclaimer
This manual provides general instructions. Pictures and functions are subject to the actual product. The company is dedicated to improving product performance and reserves the right to modify product functions and interfaces described in this manual without notice.
Please keep your device properly. The company is not responsible for any loss caused by incorrect operation of software/hardware, repair, or other reasons. The company is not responsible for any third-party claims.
This manual has been carefully checked by professional engineers; please understand any inevitable omissions.
Attention: Please do not look directly into the lens when projecting to prevent strong light from harming your eyes. Children should use the projector under the supervision of adults.
FCC Compliance
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.