VEVOR Air Jack 5 Ton (11000 lbs) Triple Bag Air Jack Instruction Manual

1. Sissejuhatus ja ohutusteave

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your VEVOR 5 Ton (11000 lbs) Triple Bag Air Jack, Model ZG-A. Please read this manual thoroughly before initial use and retain it for future reference.

Üldised ohutushoiatused

• ALATI wear appropriate personal protective equipment, including safety glasses and gloves.
• MITTE KUNAGI exceed the rated load capacity of 5 tons (11000 lbs).
• ALATI use jack stands to support the vehicle after lifting. The air jack is a lifting device, not a vehicle support device.
• Ensure the jack is placed on a hard, level surface capable of supporting the load. Avoid soft ground or uneven surfaces.
• Keep hands, feet, and other body parts clear of the jack and vehicle during lifting and lowering operations.
• Do not modify the jack in any way. Use only original replacement parts if repairs are necessary.
• Ensure the air compressor used meets the specified working pressure requirements.
• Inspect the jack for damage or wear before each use. Do not use if damaged.
• Hoidke lapsed ja volitamata töötajad tööpiirkonnast eemal.

2. Toote lõppview

The VEVOR Triple Bag Air Jack is a pneumatic lifting device designed for quick and efficient vehicle lifting. It features a robust construction with multiple airbags and internal steel pipes for stability.

Joonis 2.1: VEVOR 5 Ton Triple Bag Air Jack. This image displays the complete air jack assembly, highlighting its compact design and triple airbag structure.

Peamised omadused:

• 5 Ton (11000 lbs) Load Capacity: Sobib laiale sõidukivalikule.
• Triple Airbag Design: Provides stable and efficient lifting.
• Six Internal Steel Pipes: Enhances structural stability during operation.
• Reguleeritav käepide: Ergonomic design for comfortable positioning and maneuverability.
• Quick Lifting: Achieves maximum height in approximately 3-5 seconds.
• Thick Non-slip Rubber Pad: Ensures secure contact with the vehicle chassis.

3. Seadistamine ja kokkupanek

3.1 Lahtipakkimine

Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged. If any parts are missing or damaged, contact VEVOR customer support immediately.

3.2 Käepideme kokkupanek

1. Attach the handle to the main jack body using the provided fasteners. Ensure all bolts are securely tightened.
2. Connect the air hose from the jack body to the control valve assembly on the handle.
3. Install the appropriate male air fitting (included) to the control valve assembly. It is recommended to use thread sealant tape (not included) to prevent air leaks.

Joonis 3.1: Handle adjustment mechanism. This image illustrates how the handle can be adjusted for ergonomic operation and storage.

3.3 Esmane ülevaatus

• Kontrollige kõigi ühenduste tihedust.
• Inspect the airbags for any signs of cuts, punctures, or wear.
• Ensure the wheels rotate freely.
• Confirm the control valves (inflation and deflation) operate smoothly.

4. Kasutusjuhised

4.1 Preparing for Lift

1. Park the vehicle on a firm, level surface. Engage the parking brake and block the wheels that will remain on the ground.
2. Locate the manufacturer's recommended lifting points on the vehicle chassis.
3. Position the air jack directly under the designated lifting point, ensuring the rubber pad makes full and stable contact.
4. Connect an air compressor (with specifications ≥0.8 MPa / 117.57 PSI) to the air inlet on the jack's handle.

Joonis 4.1: Step-by-step guide for inflating and deflating the air jack. This visual aid demonstrates connecting the air compressor, opening/closing valves for lifting, and opening the red valve for lowering.

4.2 Sõiduki tõstmine

1. Ensure the red (deflation) valve on the handle is closed.
2. Slowly open the green (inflation) valve to allow compressed air into the airbags. The jack will begin to rise.
3. Monitor the lifting process carefully. Ensure the vehicle remains stable and the jack does not shift.
4. Once the desired height is reached (maximum 18.5 inches / 470 mm), close the green (inflation) valve.
5. KOHE place appropriately rated jack stands under the vehicle's frame at the manufacturer's recommended support points.
6. Slowly lower the vehicle onto the jack stands by slightly opening the red (deflation) valve. Once the vehicle is securely resting on the jack stands, remove the air jack.

Joonis 4.2: The VEVOR air jack positioned under a vehicle, demonstrating its lifting capability. This image highlights the jack's capacity to lift various vehicle types.

4.3 Sõiduki langetamine

1. Ensure the area around the vehicle is clear.
2. Position the air jack back under the lifting point, ensuring stable contact.
3. Slightly open the green (inflation) valve to lift the vehicle just enough to clear the jack stands.
4. Eemaldage tungraua alused.
5. Slowly open the red (deflation) valve to release air from the airbags. The vehicle will gradually lower.
6. Once the vehicle is fully lowered and resting on its wheels, close both valves and disconnect the air compressor.
7. Remove the air jack from under the vehicle.

5. Hooldus

Regular maintenance ensures the longevity and safe operation of your VEVOR Air Jack.

• Puhastamine: After each use, wipe down the jack with a clean, damp cloth to remove dirt, grease, and debris. Avoid using harsh chemicals that could damage the rubber airbags or painted surfaces.
• Ülevaatus: Before and after each use, visually inspect the entire jack for any signs of damage, including:
  • Cuts, cracks, or abrasions on the airbags.
  • Bent or damaged handle, frame, or wheels.
  • Lahtised või puuduvad kinnitusdetailid.
  • Air leaks from connections or valves.
• Hoiustamine: Store the air jack in a clean, dry environment, preferably in its lowered position, away from direct sunlight, extreme temperatures, and corrosive materials.
• Määrimine: Periodically check and lubricate moving parts, such as wheel axles, if necessary, with a light machine oil.

Joonis 5.1: Diagram highlighting the durable components of the air jack, including the thick non-slip rubber pad, high-sealing airbag, and stable base. Regular inspection of these components is crucial for safe operation.

6. Veaotsing

This section addresses common issues you might encounter with your VEVOR Air Jack.

Kui teil tekib probleeme, mida siin ei ole loetletud või kui soovitatud lahendused probleemi ei lahenda, võtke ühendust VEVORi klienditoega.

7. Tehnilised andmed

Detailed technical specifications for the VEVOR 5 Ton Triple Bag Air Jack, Model ZG-A.

Joonis 7.1: Detailed diagram showing the dimensions and key specifications of the VEVOR Air Jack, Model ZG-A.

8. Garantii ja tugi

8.1 Garantii teave

VEVOR products are designed for durability and performance. For specific warranty terms and conditions applicable to your VEVOR Air Jack, Model ZG-A, please refer to the warranty card included with your product or visit the official VEVOR webveebisait. Hoidke ostutšekk ostutõendina garantiinõuete korral.

8.2 Klienditugi

If you have any questions, require technical assistance, or need to report an issue with your VEVOR Air Jack, please contact VEVOR customer support. Contact details can typically be found on the VEVOR official webveebilehel või toote pakendil.

Kõige ajakohasema tugiteabe saamiseks külastage palun järgmist lehte: www.vevor.com/support