Categories: eSSL

eSSL RS485 5-Inch Visible Light User Guide

eSSL® RS485 5-Inch Visible Light User Guide

www.esslsecurity.com

Overview

Device Installation

  1. Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. Fix the back plate on the wall using wall mounting screws.
  2. Attach the device to the back plate.
  3. Fasten the device to the back plate with a security screw.

Standalone Installation

Door Sensor, Exit Button & Alarm Connection

Lock Relay Connection

The system supports Normally Opened Lock and Normally Closed Lock.

The NO LOCK (normally opened at power on) is connected with ‘NO1’ and ‘COM’ terminals, and the NC LOCK (normally closed at power on) is connected with ‘NC1’ and ‘COM’ terminals. Take NC Lock as an example below:

  1. Device not sharing power with the lock
  2. Device sharing power with the lock

RS485 and RS232 Connection

Wiegand Reader Connection

Power Connection

Ethernet Connection

Click [COMM.] > [Ethernet] > [IP Address] , input the IP address and click [OK].

Note: In LAN, IP addresses of the server (PC) and the device must be in the same network segment when connecting to ZKBioSecurity software.

User Registration

When there is no super administrator set in the device, click on to enter the menu. After setting the super administrator, the system will request for the administrator’s verification before entering the menu. For the security purpose, it is recommended to register a super administrator at the first time you use the device.

Method1: Register on the device

Click on > [User Mgt.] > [New User] to register a new user. Settings include entering user ID and name, registering a fingerprint, face, password, badge (optional) and user photo, setting user role and access control role.

Ethernet and Cloud Server Settings

Click on > [COMM.] > [Ethernet] to set the network parameters. If the TCP/IP communication of the device is successful, the icon will be displayed in the upper right corner of the standby interface.

Click on > [COMM.] > [Cloud Server Setting] to set the server address and server port, that is, the IP address and port number of the server after the software is installed. If the device communicates with the server successfully, the icon will be displayed in the upper right corner of the standby interface.

Access Control Settings

Click on > [Access Control] to enter the access control management interface and set relevant parameters of access control.

Records Query

Click on > [Attendance Search] > [Attendance Record] to enter the records query interface, input the user ID and select the time range, the corresponding attendance logs will be displayed.

#24, Shambavi Building, 23rd Main, Marenahalli,JP Nagar 2nd Phase, Bengaluru – 560078
Phone : 91-8026090500 | Email : sales@esslsecurity.com


www.esslsecurity.com

Documents / Resources

eSSL RS485 5-Inch Visible Light [pdf] User Guide
RS485 5-Inch Visible Light, RS485, 5-Inch Visible Light

References

Share

Recent Posts

AVAPOW A07 Multi-Function Car Jump Starter User Manual

A07 Multi-Function Car Jump Starter AVAPOW Multi-function car jump starter -User Manual- Model: A07 EN…

4 mins ago

Kawasaki Z 650 RS Arrow Exhaust Instruction Manual

Z 650 RS Arrow Exhaust ISTRUZIONI DI MONTAGGIO FITTING INSTRUCTIONS INSTRUCTIONS DE MONTAGE MONTAGEANLEITUNGEN INSTRUCCIONES…

10 mins ago

Paulmann 953.88 Solar House Number Light Instruction Manual

953.88 Solar House Number Light Art.-Nr.:953.88 PYN 07/22 NiMH

11 mins ago

Lenovo Live Pods X16 User Guide

Live Pods X16 FCC Caut i on. Thi s devi ce compl i es wi…

11 mins ago

Delinia iD 130x250mm Kitchen Cabinet User Guide

130x250mm Kitchen Cabinet 2022/07 - V02

12 mins ago

V-TAC 11377 Battery for Solar Inverter User Manual

11377 Battery for Solar Inverter SOLAR ENERGY Battery for Solar Inverter SKU: 11377 Easy Installation…

12 mins ago