Trak Microwave | Smiths Interconnect
Installation - em-trak
User Guide for em-trak models including: B921, B922, B923, B924, B951, B952, B953, B954, B923 Class B AIS Transceiver with Integrated Splitter, Class B AIS Transceiver with Integrated Splitter, Class B AIS Transceiver, Integrated Splitter
Class B AIS Transceiver please refer to the User Manual. Installation configuration. Installing your VHF antenna. Mounting. Connecting to your power supply.
Connecting your mobile device. Data can be streamed to two WiFi and seven Bluetooth devices simultaneously. Tablet. Laptop / PC. Smartphone. Connecting a silent mode switch. Red Black.
File Info : application/pdf, 2 Pages, 1.14MB
DocumentDocument201-0953:1 B900 Series Applicable models: B921 / B922 / B923 / B924 / B951 / B952 / B953 / B954 Class B AIS Transceiver QUICK-START GUIDE For full instructions of how to install and use your B900 Series Class B AIS Transceiver please refer to the User Manual. What's in the box? Class B AIS transceiver Documentation pack 2 metre Power and data cable FLEXI-FIT TM bracket Fixings kit 1 metre VHF radio connection cable (Applicable to B923 / B924 / B953 / B954) Overview Internal GPS antenna location Micro USB port LED indicators Mounting clip *GPS antenna VHF antenna VHF radio (Applicable to B923, B924, B953 and B954) Power and data Mounting bracket Locking screw NMEA 2000 * GPS receiver & antenna supports: GPS, GLONASS, Galileo and BeiDou Dimensions 150 mm 71 mm 54 mm 150 mm 43 mm 83 mm 60 mm 115 mm 61 mm 17 mm Mounting 1 Removal 3 2 3 2 1. Locate and fix mounting bracket 2. Clip transceiver onto bracket 3. If required, tighten security screw 1 1. Loosen locking screw 2. Release mounting clip with a screwdriver 3. Lift transceiver from bracket Installation configuration VHF antenna VHF radio (Applicable to B923, B924, B953 and B954) GPS antenna (Optional) Laptop / PC Chartplotter USB Power in Switch NMEA 0183 device Wireless connection to tablet, laptop, smartphone (Applicable to B922/B924/B952/B954) NMEA 2000 Installing your VHF antenna VHF antenna VHF antenna VHF radio (Applicable to B923, B924, B953 and B954) Ensure your antenna is mounted as high as possible and covers 159MHz Installing your GPS antenna GPS Internal GPS Antenna Only Fibreglass Marine plywood Glass Steel External GPS Antenna Maximum 25mm/1" DECK DECK GPS Internal GPS antenna Window Connecting to your power supply Red Black Light green Switch connection Orange Switch connection Brown Blue White Green Transmit + Transmit Receive + Receive NMEA 0183 Port 1 Purple Pink Grey Yellow Transmit + Transmit Receive + Receive NMEA 0183 Port 2 Power in + Power in 12V ! 24V Configuring your transceiver proAIS2 Laptop / PC Micro USB USB cable (not supplied) proAIS2 can be downloaded from https://em-trak.com/installation/ External power not required for USB configuration. Connecting to your PC USB Connecting to your NMEA 2000 network Micro-C drop cable (not supplied) NMEA 2000 Connecting to your chartplotter Red Black Power in + Power in Light green Switch connection Orange Switch connection Brown Blue White Green Transmit + Transmit Receive + Receive Purple Pink Grey Yellow Transmit + Transmit Receive + Receive NMEA 0183 Port 2 NMEA 0183 Port 1 Connecting to your NMEA 0183 sensor Red Black Power in + Power in Light green Switch connection Orange Switch connection Brown Blue White Green Transmit + Transmit Receive + Receive NMEA 0183 Port 1 Purple Pink Grey Yellow Transmit + Transmit Receive + Receive NMEA 0183 Port 2 Connecting your mobile device Data can be streamed to two WiFi and seven Bluetooth devices simultaneously. Tablet Laptop / PC Smartphone Connecting a silent mode switch Red Black Brown Blue White Green Purple Pink Grey Yellow Power in + Power in Switch connections Light green Orange Transmit + Transmit Receive + Receive NMEA 0183 Port 1 Transmit + Transmit Receive + Receive NMEA 0183 Port 2 LED indicator functions LED indicators Green Red Power Error Amber Blue No TX Silent Green LED indicator Indicates that the AIS transceiver is configured, powered up and operating normally. Red LED indicator Indicates that the AIS transceiver has detected a system error. The likely causes of this are detailed in the troubleshooting guide in the B900 Series user manual. Alarms displayed in the Diagnostic tab of the em-trak configuration tools will also assist with troubleshooting. Amber LED indicator Indicates that the AIS transceiver is not transmitting. This can be for a number of reasons: · The AIS radio channels are exceptionally busy so there are currently no available slots for transmission. · The unit has been in silent mode and after deactivating silent mode this amber LED indicator will illuminate until the first AIS message has been sent. · The AIS transceiver has been commanded by the local authority (via an AIS base station) to cease transmissions. Blue LED indicator Indicates that silent mode is enabled. Silent mode is a feature of the B900 Series that ceases the transmissions from your own vessel, whilst the reception of other vessel position reports continue. You can activate this using the configuration tools or by activating the toggle switch as detailed in the B900 Series user manual. US customers only In the USA it is illegal for an end user to configure their own AIS with their vessel data. To do so is a violation of the rules of the United States Coast Guard (USCG). This must be done by a competent installer, such as em-trak, an em-trak dealer or competent marine electronics professional. If your transceiver has not been pre-configured for you please refer to your dealer or contact support@em-trak.com for advice on how to have the transceiver configured legally. If purchasing direct from em-trak online we can configure it for you and dispatch it pre-configured at no extra cost, if you are purchasing from one of our dealers, then they will do it for you. Head Office: em-trak Marine Electronics Ltd Wireless House, Westfield Industrial Estate, Midsomer Norton, Bath, BA3 4BS, UK E: support@em-trak.com T: +44 (0) 1761 409 559, F: +44 (0) 1761 410 093 Regional Office: em-trak Marine Electronics Ltd 470 Atlantic Avenue, 4th Floor, Boston, MA 02210, USA E: enquiries@em-trak.com T: +1 617 273 8395, F: +1 617 273 8001