Model: TA230
Electrical Rating: Power: 230VAC, Consumption: 2W, IP Rating: IP54.
Compliance: CE Marked. Revision 1.0.
This section outlines the procedures for assembling and disassembling the TA230 actuator, detailing the steps involved in fitting and removing the unit.
Instructions for the normally closed (NC) configuration are provided. This includes a testing procedure: fit the actuator to the base, apply power for six minutes, and allow it to cool. Following testing, users are guided to check the correct adaptor fit using provided visual references.
The document also illustrates the normal operation states, showing the actuator when the power is OFF and when the power is ON.
File Info : application/pdf, 1 Pages, 595.52KB
DocumentDocument