IKT Self Cleaning Bottom Load Water Cooler Dispenser with Nugget Ice Maker

1. Información importante de seguridad

Please read all instructions carefully before using this appliance to prevent injury and property damage. Keep this manual for future reference.

• Coloque siempre el dispensador sobre una superficie nivelada y estable.
• Do not operate the dispenser with a damaged power cord or plug.
• Asegure una conexión a tierra adecuada para reducir el riesgo de descarga eléctrica.
• Keep children away from the hot water dispenser area due to the risk of scalding.
• No sumerja el dispensador, el cable ni el enchufe en agua ni en otros líquidos.
• Desenchufe el dispensador antes de limpiarlo o realizar cualquier mantenimiento.
• This appliance is designed for use with potable water only.

2. Producto terminadoview

The IKT Water Cooler Dispenser provides three temperature settings for water (cold, room temperature, hot) and features a built-in nugget ice maker. It is designed for convenience with a bottom-load water bottle system and self-cleaning capabilities.

Figura 2.1: Frente view of the IKT Water Cooler Dispenser.

Figure 2.2: Bright LED display indicating various statuses such as 'Making Ice', 'Child Lock', 'Lack of Water', 'Hot Water', 'Room Water', and 'Cold Water'.

3. Configuración

3.1 Desembalaje y colocación

• Retire todos los materiales de embalaje.
• Place the dispenser on a hard, level surface. Ensure there is at least 4 inches of clearance from the wall for proper ventilation.
• Evite la luz solar directa o fuentes de calor.

3.2 Instalación de la botella de agua

This dispenser uses a bottom-load system, eliminating the need for heavy lifting.

1. Abra la puerta del gabinete inferior.
2. Insert the probe into a standard 3 or 5-gallon water bottle.
3. Slide the water bottle into the cabinet.
4. Cierra la puerta del gabinete.

Figure 3.1: Illustration of the no-lift bottom-load water bottle installation.

3.3 Puesta en marcha inicial

1. Enchufe el dispensador a una toma eléctrica con conexión a tierra.
2. Allow the water tanks to fill completely before turning on heating or cooling functions. This may take a few minutes.
3. Press the power button (ON/OFF) to activate the unit.

4. Operación

4.1 Dispensación de agua

The dispenser offers three temperature options: cold, room temperature, and hot.

• Agua fría: Press the 'Cold Water' button. The cold water indicator light will illuminate. Place your cup under the cold water spout and press the dispensing lever.
• Agua a temperatura ambiente: Place your cup under the room temperature water spout and press the dispensing lever.
• Agua caliente: This function has a child safety lock. First, press and hold the 'Child Lock' button, then press the 'Hot Water' button. The hot water indicator light will illuminate. Place your cup under the hot water spout and press the dispensing lever. Release the child lock button after dispensing.

Figure 4.1: Detail of the Child Safety Lock button for hot water dispensing.

4.2 Máquina de hielo en pepitas

The integrated ice maker produces nugget ice. It can produce up to 33 lbs of ice daily and store up to 2.76 lbs in its internal bin. Note: The machine does not keep ice frozen.

• To activate ice making, ensure the 'Making Ice' indicator is on. If not, press the ice-making button.
• When the ice bin is full, the machine will make three beeps and stop making ice.
• To dispense ice, place your cup under the ice spout and press the ice dispensing lever.

Figure 4.2: Illustration of the daily ice production capacity and ice bin storage. Note that ice is not kept frozen.

4.3 Empty Bottle Alert

The 'Empty Bottle' indicator light will alert you when the water bottle needs replacement. This indicator is controlled by the PCB program for accurate water level detection. If the bottle is empty, the indicator may not light up immediately; it depends on the cold water tank's water level. Please wait approximately 7 minutes after replacing an empty bottle to check if the indicator turns off.

5. Mantenimiento

5.1 Función de autolimpieza

The dispenser features a self-cleaning function to maintain hygiene.

1. Hold the power button to turn off the machine.
2. Press and hold the ice-making button for 3 seconds to activate the self-cleaning function.
3. The indicator lights will blink, and the power light will remain on during the cleaning cycle.
4. The machine will automatically shut off after approximately 10 minutes when the cycle is complete.

Figure 5.1: Visual representation of the self-cleaning process activation.

5.2 Limpieza de la bandeja de goteo

The removable drip tray should be cleaned regularly to prevent spills and maintain hygiene.

• Gently pull out the drip tray from its position below the spouts.
• Empty any collected water and wash the tray with mild soap and water.
• Enjuague bien y seque antes de volver a insertarlo.

Figure 5.2: Close-up of the removable drip tray for easy cleaning.

5.3 Limpieza exterior

Limpie las superficies exteriores con un paño suave, damp Paño. No utilice limpiadores abrasivos ni disolventes.

6. Solución de problemas

Review estos problemas comunes y soluciones antes de contactar con el servicio de atención al cliente.

7. Especificaciones

8. Garantía y soporte

For warranty information or technical support, please refer to the warranty card included with your product or contact IKT customer service directly. Keep your purchase receipt as proof of purchase.

Contact information for IKT customer service can typically be found on the product packaging or the official IKT websitio.