Apple AirPods Pro 2nd Gen (Lightning) Replacement Charging Case (A2700) User Manual

Introducción y másview

This manual provides instructions for the Apple AirPods Pro 2nd Generation (Lightning) Replacement Charging Case, model A2700. This product is designed to replace a lost or damaged original charging case, offering seamless connectivity and reliable performance for your existing AirPods Pro 2nd Generation (Lightning) earbuds.

Nota importante de compatibilidad: This replacement charging case is exclusively compatible with Apple AirPods Pro (2nd Generation) with Lightning connector. It pairs specifically with the left AirPod Pro (A2699) and right AirPod Pro (A2698) from the 2nd Generation Lightning model. It is not compatible with other AirPods models, including AirPods Pro (1st Generation) or AirPods Pro (2nd Generation) with USB-C connector.

Image: The Apple AirPods Pro 2nd Generation (Lightning) Replacement Charging Case (Model A2700) in white. This image shows the exterior of the charging case, which is designed to hold and charge the AirPods Pro earbuds.

Instrucciones de instalación

Follow these steps to set up and pair your new replacement charging case with your AirPods Pro 2nd Generation (Lightning) earbuds:

1. Cargar el caso: Before pairing, ensure the replacement charging case is sufficiently charged. Connect the Lightning cable (not included) to the charging port on the bottom of the case and the other end to a USB power adapter. The status light on the front of the case will indicate charging status.
2. Place AirPods in Case: Insert your left and right AirPods Pro 2nd Generation (Lightning) earbuds into the new charging case. Ensure they are seated correctly.
3. Cerrar la tapa: Cierre la tapa del estuche de carga.
4. Emparejar con el dispositivo:
   • Open the charging case lid with your AirPods inside, and hold it near your iPhone or iPad.
   • A setup animation should appear on your device's screen. Follow the on-screen instructions to connect.
   • If the animation does not appear, go to your device's Bluetooth settings, find your AirPods in the list, and tap "i" (information) next to them. Then tap "Forget This Device." After forgetting, repeat the steps above.
5. Restablecer (si es necesario): If pairing issues persist, with the AirPods in the case and the lid open, press and hold the setup button on the back of the case for about 15 seconds until the status light flashes amber, then white. Then, try pairing again.

Instrucciones de funcionamiento

This section details the basic operation of your replacement charging case.

• Cargando AirPods: Simply place your AirPods Pro 2nd Generation (Lightning) into the charging case. They will begin charging automatically. The case itself holds multiple charges for your AirPods.
• Carga del estuche:
  • Carga con cable: Connect a Lightning cable to the port on the bottom of the case.
  • Carga inalámbrica: Place the case with the status light facing up on a Qi-certified wireless charging mat.
  • Carga MagSafe: The case is compatible with MagSafe chargers for convenient magnetic alignment and faster wireless charging.
• Comprobación del estado de la batería:
  • Luz de estado del caso:
    • Luz verde: Fully charged (or AirPods fully charged if they are inside).
    • Luz ámbar: Less than one full charge remaining.
    • Luz blanca intermitente: Listo para emparejar.
    • Luz ámbar intermitente: Pairing error, or needs to be reset.
  • En iPhone / iPad: Open the case lid near your iOS device, and the battery status for both AirPods and the case will appear on screen. You can also add the Batteries widget to your device's Today View.

Mantenimiento

Proper care ensures the longevity and performance of your charging case.

• Limpieza:
  • Wipe the exterior of the case with a soft, lint-free cloth.
  • Para marcas difíciles, ligeramente dampen the cloth with water or a 70% isopropyl alcohol solution.
  • Do not use abrasive materials, sprays, or solvents.
  • Asegúrese de que no entre humedad en los puertos de carga ni en las aberturas de los altavoces.
• Almacenamiento: Store the charging case in a clean, dry environment away from extreme temperatures.
• Evitar daños: Protect the case from drops, impacts, and exposure to liquids. The case is not water-resistant.

Solución de problemas

If you encounter issues with your replacement charging case, try the following solutions:

• Los AirPods no se cargan:
  • Asegúrese de que el estuche de carga esté cargado.
  • Verify that the AirPods are correctly seated in the case.
  • Clean the charging contacts on both the AirPods and inside the case with a dry cotton swab.
• Case Not Charging:
  • Check the Lightning cable for damage and ensure it's securely connected. Try a different cable and power adapter.
  • If using wireless charging, ensure the case is properly aligned on the charging mat and the mat is powered.
• Problemas de emparejamiento:
  • Ensure your AirPods are AirPods Pro 2nd Generation (Lightning) model.
  • Perform a reset of the charging case: With AirPods inside and lid open, press and hold the setup button on the back for about 15 seconds until the status light flashes amber, then white.
  • On your iOS device, go to Bluetooth settings, "Forget This Device" for your AirPods, then try pairing again.
• Status Light Not Responding:
  • Try charging the case for at least 30 minutes.
  • Perform a hard reset as described in "Pairing Issues."

If problems persist, contact the seller or Apple Support for further assistance.

Presupuesto

Garantía y soporte

This replacement charging case comes with a Garantía de 90 días Desde la fecha de compra. Esta garantía cubre defectos de fabricación y asegura el correcto funcionamiento del producto en condiciones normales de uso.

For warranty claims, technical support, or further assistance, please contact the seller from whom you purchased this product. You may also refer to the official Apple Support website for general AirPods Pro information and troubleshooting guides.

Conserve su comprobante de compra para fines de garantía.