1. Producto terminadoview
The DATOUBOSS 12V 100Ah LiFePO4 Battery is a high-performance lithium iron phosphate battery designed for deep cycle applications. It features a built-in 100A Battery Management System (BMS) for enhanced safety and longevity, making it suitable for various uses including RVs, camping, solar energy systems, off-grid power, and marine applications.
Figure 1: DATOUBOSS 12V 100Ah LiFePO4 Battery.
Características principales:
- Superior Performance and Safety: Utilizes solid-state electrolyte technology and UL2054 safety certification. Features a built-in 100A BMS with multiple protections including short-circuit, over-voltage, over-heating, and over-charging protection.
- Vida útil prolongada: Offers a service life of up to 10 years and 4,000-15,000 deep cycles, significantly outperforming lead-acid batteries.
- Expansión de capacidad flexible: Supports series and parallel connections for increased capacity and voltage, allowing configurations up to 4P4S (16 batteries) for power outputs from 1.28 kW to 20.48 kW.
- Amplio rango de temperatura de funcionamiento: Designed to adapt to extreme temperatures, ensuring reliable discharge performance from -4°F to 140°F.
- Ligero y compacto: Smaller and lighter than traditional lead-acid batteries, facilitating easier installation and portability.
2. Información de seguridad
Adhering to these safety guidelines is crucial for preventing damage to the battery and ensuring user safety. Improper handling can lead to serious injury or equipment malfunction.
Figure 2: Important safety warnings for battery handling.
Pautas generales de seguridad:
- Do NOT reverse polarity: Ensure positive and negative terminals are connected correctly.
- Avoid physical impact: Do not hit, drop, or throw objects at the battery, or step on it.
- Prevent short circuits: No utilice objetos metálicos para conectar directamente los terminales positivo y negativo.
- No welding or piercing: Do not weld the battery directly or pierce it with nails or other sharp objects.
- Mantener seco: No sumerja la batería en agua de mar ni en ningún otro líquido.
- Not for engine starting: This battery is not designed for use as a car starter battery, trip starter battery, or engine starter battery.
- Límites de temperatura: Do not use the battery at high temperatures. Exceeding temperature limits may cause overheating, fire, or permanent damage, shortening its service life.
3. Configuración
Inspección inicial:
Upon receiving your DATOUBOSS LiFePO4 battery, carefully inspect the packaging and the battery for any signs of damage. Ensure all terminals are secure and free from debris. If any damage is found, contact customer support immediately.
Battery Connection (Series and Parallel):
The DATOUBOSS 12V 100Ah LiFePO4 battery supports both series and parallel connections to achieve desired voltage and capacity. Always ensure all batteries are of the same model and capacity when connecting in series or parallel.
- Coneccion paralela: Connect positive terminals together and negative terminals together to increase total capacity while maintaining the same voltage.
- Conexión en serie: Conecte el terminal positivo de una batería al terminal negativo de la siguiente batería para aumentar el volumen total.tage. Ensure all batteries are at a similar state of charge before connecting in series.
- Configuración máxima: The battery supports up to 4 series and 4 parallel connections (4S4P) for a maximum load power of 20.48 kW.
Figure 3: Diagram illustrating flexible capacity expansion through series and parallel connections.
4. Instrucciones de funcionamiento
Cargando:
The DATOUBOSS LiFePO4 battery can be charged using various methods. Always use a charger compatible with LiFePO4 batteries to ensure optimal performance and safety.
- Panel solar: Connect to a solar panel system with an appropriate MPPT (Maximum Power Point Tracking) charge controller.
- Cargador de batería: Utilice un cargador de batería LiFePO4 específico.
- Generador: Connect to a generator with a compatible charging output.
Figure 4: Various charging methods for the LiFePO4 battery.
Descargar:
The battery provides a stable discharge curve above 12.8V and can deliver 95% of its capacity. Ensure your inverter and connected devices are compatible with the battery's voltage y especificaciones actuales.
Consideraciones de temperatura:
The battery is designed for excellent discharge performance ranging from -4°F to 140°F (-20°C to 60°C). Operating outside this range may affect performance and lifespan. The built-in BMS includes low-temperature protection.
Figure 5: The battery's ability to adapt to extreme temperatures.
5. Mantenimiento
Limpieza:
- Regularly inspect the battery terminals for corrosion or loose connections.
- Limpiar la batería casinLimpie con un paño seco y suave. No utilice disolventes ni limpiadores abrasivos.
Almacenamiento:
- Si va a almacenar la batería durante un período prolongado, asegúrese de que esté cargada aproximadamente entre el 50 y el 70 % de su capacidad.
- Guarde la batería en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
- Disconnect the battery from all loads during storage.
6. Solución de problemas
This section provides solutions for common issues you might encounter with your DATOUBOSS LiFePO4 battery.
| Asunto | Posible causa | Solución |
|---|---|---|
| La batería no se carga | Incorrect charger type; loose connections; BMS protection activated (over-discharge, over-voltage, low temperature) | Ensure LiFePO4 compatible charger is used; check all cable connections; allow battery to warm up if in cold conditions; consult BMS status indicators if available. |
| Baja potencia de salida | Battery not fully charged; excessive load; loose connections | Fully charge the battery; reduce the load on the battery; check and tighten all connections. |
| Sobrecalentamiento de la batería | Operating in high ambient temperatures; excessive charge/discharge current | Move battery to a cooler environment; ensure charge/discharge currents are within specified limits. The BMS will activate over-temperature protection. |
7. Especificaciones del producto
| Especificación | Valor |
|---|---|
| Marca | DATOUBOSS |
| Modelo | DT-12V100AH |
| Número de modelo del artículo | Batería de litio de 12V 100Ah LiFePO4 |
| Volumentage | 12.8 voltios (CC) |
| Capacidad | 100 Ah |
| Peso del artículo | 24 libras (aprox. 10.9 kg) |
| Dimensiones del paquete | 10.2 x 8.5 x 6.6 pulgadas |
| Sistema de gestión de residuos sólidos | Built-in 100A BMS with low-temp protection |
| Ciclo de vida | 4000-15000 ciclos |
| Vida útil | Hasta 10 años |
| Código Postal | 740684063402 |
8. Garantía y soporte
Información de garantía:
La batería LiFePO4 DATOUBOSS 12V 100Ah viene con un 5 año de garantíaCubre defectos de materiales y mano de obra en condiciones normales de uso. Conserve su comprobante de compra para reclamaciones de garantía.
Atención al cliente:
For any questions, technical assistance, or warranty claims, please contact DATOUBOSS customer service. We provide 24-hour online service to ensure timely and efficient support.
Even if Amazon indicates an item is not returnable, please reach out to us directly for assistance with product defects, damage, or usage concerns. We offer free return and replacement services to ensure your satisfaction.