Procolored F13 Panda DTF Printer User Manual

1. Introducción

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Procolored F13 Panda DTF Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.

Figure 1: Procolored F13 Panda DTF Printer.

2. Información de seguridad

Observe siempre las siguientes precauciones de seguridad para evitar lesiones o daños a la impresora:

• Asegúrese de que la impresora esté colocada sobre una superficie estable y nivelada.
• Conecte la impresora a una toma de corriente con conexión a tierra y con el voltaje correcto.tage (CA 100-230V).
• No exponga la impresora al agua ni a la humedad excesiva.
• Mantenga las manos alejadas de las piezas móviles durante el funcionamiento.
• Use only recommended inks and cleaning solutions.
• Mantener fuera del alcance de los niños.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

• Procolored F13 DTF Printer
• Roll Film 13"
• DTF Ink Set (CMYK+WW)
• Nozzle Protection Fluid
• DTF Powder
• Soporte de plástico
• Cable de datos (USB)
• Cable de alimentación
• Moisturizing Device
• Botella de residuos
• Cartucho
• Spare Ink Tube
• Soporte de rodillo
• Almohadilla de tinta
• Limpiaparabrisas
• Cuchilla del cortador
• Dongle USB
• Jeringuilla
• Destornillador
• Barra de rodillo
• Tubo de extensión
• Needle Hub
• Primavera
• Torunda

Figure 2: Included accessories for the Procolored F13 DTF Printer.

4. Guía de configuración

4.1 Desempaquetado y colocación inicial

Carefully remove the printer and all components from the packaging. Place the printer on a sturdy, level surface in a well-ventilated area.

4.2 Instalación del rollo de película

Install the 13-inch DTF film roll onto the designated holder at the rear of the printer. Ensure the film feeds smoothly into the printer mechanism.

4.3 Ink System Setup

Fill the ink tanks with the corresponding DTF pigment inks (Cyan, Magenta, Yellow, Black, White, Light Cyan). Ensure the white ink circulation system is properly connected and functioning to prevent clogging.

Figure 3: Illustration of the advanced white ink system, showing circulation, siphon effect, and automatic cleaning.

4.4 Conexión de alimentación e instalación del software

Connect the power cable to the printer and a suitable power outlet. Install the Procolored RIP software (compatible with Windows 7/10/11) on your computer. Follow the on-screen instructions for software installation and driver setup.

Figura 4: Sobreview of the Procolored RIP software interface and available tutorials.

5. Instrucciones de funcionamiento

5.1 Preparing for Print

1. Power on the printer using the main switch.
2. Ensure the DTF film is correctly loaded and aligned.
3. Open the Procolored RIP software on your computer.
4. Import your design and adjust settings such as size, resolution (up to 1440x1440dpi), and color profile.

5.2 Proceso de impresión

Initiate the print job from the software. The printer will feed the film and apply ink. The built-in cutter will automatically trim the film after printing, optimizing material usage.

5.3 Postimpresión

After printing, apply DTF powder to the wet ink and cure it using a DTF oven or heat press. Once cured, the design is ready for transfer to textiles.

Figura 5: Examples of versatile applications for DTF prints, including shirts, flags, tote bags, and caps.

6. Mantenimiento

6.1 Sistema de limpieza automática

The F13 Panda DTF Printer features an automatic cleaning system that operates even when the printer is powered on. This system helps prevent print head clogs and ensures consistent print quality. Regular use of this feature is recommended.

6.2 White Ink Circulation

The printer includes a white ink circulation system with a siphon filtration diaphragm pump. This system minimizes blockages and maintains the quality of white ink. Ensure the system is always active during operation.

6.3 Limpieza general

Limpie periódicamente el exterior de la impresora con un paño suave y húmedo.amp cloth. Refer to the software's maintenance section for specific print head cleaning procedures if needed.

7. Solución de problemas

Si tiene problemas con su impresora, considere las siguientes soluciones comunes:

• Problemas de calidad de impresión: Perform a nozzle check and head cleaning through the software. Ensure ink levels are sufficient.
• Film Feeding Problems: Check for obstructions in the film path and ensure the film roll is correctly installed and aligned.
• Errores de software: Restart the software and the printer. Ensure your software and drivers are up to date.
• Problemas de conectividad: Verify USB cable connection and ensure the printer is powered on.

For persistent issues, contact Procolored customer service.

8. Especificaciones

9. Garantía y soporte

Your Procolored F13 Panda DTF Printer comes with a comprehensive warranty:

• Print Head and Related Components: Six-month warranty.
• Otros accesorios: Garantía de un año.

Our dedicated customer service team is available 24/6 to address any queries or technical issues you may encounter. Please refer to your purchase documentation for specific contact details.