BSMOOM G2 Jump Starter with Air Compressor User Manual

1. Instrucciones de seguridad importantes

Please read all safety instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• No operate the unit if it is damaged or has been modified.
• No Arrancar una batería congelada.
• No allow the smart jumper clamps to touch each other or connect the positive and negative clamps to the same battery terminal.
• No expose the unit to rain or extreme temperatures.
• Mantener fuera del alcance de los niños.
• Asegúrese de que haya una ventilación adecuada al utilizar el compresor de aire.
• Always disconnect the jumper cables from the jump starter unit first, then from the vehicle battery, after a successful jump start.

2. Contenido del paquete

Verifique que todos los artículos enumerados a continuación estén incluidos en su paquete:

• 1 x BSMOOM G2 Car Battery Charger Jump Starter
• 1 x cables de puente inteligentes
• 1 x Tire Inflator Tube with 4 Nozzles Set
• 1 x Blower/Deflator Pump with 4 Nozzles Set
• Cable de carga 1 x USB-C
• 1 x Manual de usuario (este documento)

3. Producto terminadoview

The BSMOOM G2 is a versatile 14-in-1 device designed for automotive emergencies and general utility. It combines a powerful jump starter, a 150PSI air compressor, and a 45W quick-charge power bank into one portable unit.

Características principales:

• Corriente pico de 8000 A: Capable of jump starting all gas engines and diesel engines up to 14L.
• Compresor de aire de 150 PSI: For inflating car tires, bicycle tires, sports equipment, and more.
• 45W Quick Charger: USB-C output for fast charging of smartphones, tablets, and other devices.
• Multifuncional: Includes LED flashlight, SOS light, and warning light.

Componentes:

Figura 3.1: BSMOOM G2 Main Unit. This image displays the compact and robust design of the jump starter, featuring its various ports and display screen.

• Unidad principal: Houses the battery, jump starter port, air compressor, USB output ports, and display.
• Cables puente inteligentes: Equipped with safety features to prevent reverse polarity and short circuits.
• Manguera de aire: Connects to the unit for tire inflation.
• Nozzle Set: Various adapters for different inflation needs.

4. Configuración

4.1 Carga de la unidad

Before first use, fully charge the BSMOOM G2 unit. It is recommended to charge the unit every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB-C charging cable to the USB-C input port on the BSMOOM G2.
2. Conecte el otro extremo del cable USB-C a un adaptador de pared USB compatible (no incluido) o a un cargador de automóvil.
3. The display will indicate the charging status. The unit is fully charged when the battery indicator shows 100%.

Figura 4.1: USB-C Charging Port. This image highlights the location of the USB-C input port for charging the device.

4.2 Comprobaciones iniciales

• Ensure the unit is fully charged before attempting to jump start a vehicle or inflate tires.
• Inspect all cables and accessories for any signs of damage. Do not use if damaged.

5. Instrucciones de funcionamiento

5.1 Arrancar un vehículo con ayuda de un puente

The BSMOOM G2 can jump start 12V vehicles with all gas engines and diesel engines up to 14L.

1. Ensure the jump starter unit has at least 50% charge.
2. Apague el encendido del vehículo y todos los accesorios.
3. Insert the smart jumper cable plug into the jump starter's 12V output port. Ensure a firm connection.
4. Conectar el rojo (+) clamp al terminal positivo de la batería del vehículo.
5. Conectar el negro (-) clamp al terminal negativo de la batería del vehículo.
6. Check the indicator light on the smart jumper cable. A solid green light indicates a correct connection. If it's red or flashing, check connections and battery voltage.
7. Arranque el motor del vehículo. Si no arranca inmediatamente, espere 30 segundos y vuelva a intentarlo. No lo arranque durante más de 3 segundos por intento.
8. Una vez que el vehículo arranque, desconecte inmediatamente el negro (-) clamp from the vehicle battery, then the rojo (+) clamp.
9. Finally, disconnect the smart jumper cable plug from the jump starter unit.

Figura 5.1: Smart Jumper Cables. This image illustrates the correct connection of the smart jumper cables to a vehicle battery for jump starting.

5.2 Inflado de neumáticos

El compresor de aire integrado puede inflar neumáticos hasta 150 PSI.

1. Screw the tire inflator tube onto the air output port of the BSMOOM G2.
2. Attach the other end of the tube to the tire valve stem. Ensure a tight seal.
3. Turn on the unit and select the desired pressure unit (PSI, BAR, KPA).
4. Use the '+' and '-' buttons to set the target tire pressure.
5. Press the start button to begin inflation. The compressor will automatically stop when the preset pressure is reached.
6. Disconnect the tube from the tire valve and then from the unit.

Figura 5.2: Tire Inflator Hose. This image shows the tire inflator hose connected to the unit and ready for use.

5.3 Air Inflation/Deflation Pump

Use the blower/deflator pump with the appropriate nozzles for inflatables like air mattresses, swimming rings, or for quick deflation.

1. Select the correct nozzle from the provided set for your inflatable item.
2. Attach the nozzle to the blower/deflator port on the unit.
3. For inflation, insert the nozzle into the item's air valve and turn on the pump.
4. For deflation, connect the nozzle to the deflation port (if available, or reverse connection if applicable) and turn on the pump to extract air.

Figura 5.3: Blower/Deflator Pump and Nozzles. This image displays the blower/deflator pump attachment along with the various nozzles for different applications.

5.4 Uso como banco de energía

The BSMOOM G2 features a 45W Quick Charger for charging electronic devices.

1. Connect your device's charging cable to one of the USB output ports on the BSMOOM G2.
2. La unidad comenzará a cargar automáticamente su dispositivo.
3. Monitorea el estado de carga de tu dispositivo. Desconéctalo cuando la carga esté completa.

6. Mantenimiento y almacenamiento

• Limpieza: Limpie la unidad con un paño seco y suave. No utilice productos químicos agresivos ni materiales abrasivos.
• Cargando: Recargue la unidad cada 3 a 6 meses para evitar una descarga profunda y prolongar la vida útil de la batería.
• Almacenamiento: Store the BSMOOM G2 in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
• Cuidado de cables: Keep jumper cables and air hoses neatly coiled and free from kinks or damage.

7. Solución de problemas

8. Especificaciones

9. Garantía y soporte

BSMOOM products are manufactured to high-quality standards. This product comes with a limited warranty from the date of purchase. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, warranty claims, or general inquiries, please contact BSMOOM customer service through the retailer where the product was purchased or visit the official BSMOOM websitio (si está disponible).

Please have your model number (G2) and purchase information ready when contacting support.