1. Introducción
This user manual provides comprehensive instructions for the FAAC XT02 SLH-DS 787030 remote control. This device is a 2-channel radio transmitter designed for controlling gates, garage doors, and other automated systems. It operates at 868.35 MHz and supports both SLH (Self Learning Hopping) and DS (Dual System / Omnidec) protocols, offering enhanced security and compatibility.
Please read this manual carefully before installation and use to ensure proper function and to maximize the lifespan of your remote control.
2. Producto terminadoview
2.1. Características principales
- Reference 787030: Compact and reliable bi-channel remote control, operating at 868.35 MHz.
- Seguridad avanzada: Features SLH (Self Learning Hopping – evolving rolling code) and DS (Dual System / Omnidec) protocols for anti-cloning protection.
- Amplia compatibilidad: Directly replaces models XT2 868 SLH white (ref. 787009), XT2 868 SLH black (ref. 7870091), and TM2 868 DS.
- Simplified Programming: Diseñado para una configuración rápida y sencilla.
- Diseño compacto: Easy to carry and discreet.
2.2. Componentes del producto
The FAAC XT02 SLH-DS 787030 remote control is a black unit with two black buttons. It is designed for intuitive use.
Figura 1: Frente view of the FAAC XT02 SLH-DS 787030 remote control.
Figura 2: Lado view of the FAAC XT02 SLH-DS 787030 remote control, showing its slim profile.
Figure 3: Comparison image showing the new FAAC XT02 SLH-DS remote alongside older FAAC remote models it replaces.
Figure 4: Information graphic highlighting the multi-coding capabilities (SLH, SL, DS, RC) and frequency options (433.92 MHz or 868.35 MHz) of the FAAC XTO series.
Figure 5: Important announcement detailing the FAAC XTO model's ability to group multiple protocols (SLH, RC, SL, DS) into a single transmitter, available in 433 MHz and 868 MHz versions.
3. Especificaciones
| Referencia del producto | 787030 |
| Radio Frequency | 868.35 MHz |
| Protocolos | SLH (Self Learning Hopping - rolling code) and DS (Omnidec) |
| Número de canales | 2 independent buttons |
| Fuente de alimentación | 1 x CR2032 lithium battery (3 V), included |
| Dimensiones (L x An x Al) | Aprox. 63 x 40 x 10 mm (2.48 x 1.57 x 0.39 pulgadas) |
| Peso | Aprox. 20 g (0.7 oz) |
| Color | Negro casing with black buttons |
| Rango | Up to 100 m (328 ft) in open field (varies by environment) |
| Indicador | LED emission indicator |
| Seguridad | Dynamic encryption, anti-copy rolling code |
| Fabricante | FAAC |
Figura 6: Atrás view of the remote control, showing model number, frequency, and manufacturer details.
4. Configuración y programación
The FAAC XT02 SLH-DS remote control features simplified programming. For detailed, step-by-step instructions, it is highly recommended to refer to the official programming notice provided by the manufacturer. This notice often includes specific procedures for different receiver types and protocols (SLH, DS).
4.1. Accessing Detailed Programming Instructions
A digital version of the programming manual can typically be accessed by scanning the QR code provided with your product or found on the manufacturer's websitio.
Figure 7: Programming notice with a QR code. Scan this code to access the full programming instructions, which cover multi-protocol setup (SLH / SL / DS / RC).
4.2. General SLH Self-Learning Procedure (Example)
This is a general guide for the SLH self-learning function. Specific steps may vary. Always consult the detailed programming notice.
- Prepare the Existing Remote: Take an already programmed and working FAAC SLH remote control (the "master" remote).
- Activate Master Remote: Press and hold one of the buttons on the master remote. The LED on the master remote will flash slowly, then steadily.
- Prepare New Remote: While the master remote's LED is steady, take your new XT02 SLH-DS remote.
- Iniciar el aprendizaje: Press and hold the corresponding button on the new XT02 SLH-DS remote that you wish to program. The LED on the new remote will flash slowly.
- Código de transmisión: Bring the master remote very close to the new remote (within 5 cm). The LED on the new remote should flash rapidly, then turn off, indicating successful code reception.
- Prueba: Release both buttons. Test the new remote control with your gate or garage door system.
Note: If the new remote's LED does not flash rapidly or the programming fails, repeat the steps. Ensure the master remote is transmitting correctly and the new remote's battery is functional.
4.3. DS Protocol Programming
Programming for DS (Dual System / Omnidec) protocol typically involves setting dip switches on the receiver or a specific sequence of button presses on the receiver unit itself, followed by transmitting from the new remote. Refer to the detailed programming notice or your receiver's manual for precise instructions.
5. Instrucciones de funcionamiento
The FAAC XT02 SLH-DS remote control is designed for straightforward operation once programmed.
- Funcionalidad del botón: Each of the two buttons on the remote control corresponds to a specific function or channel on your automated system (e.g., opening a gate, opening a garage door).
- Activating a Function: To activate a function, simply press the corresponding button firmly for approximately one second. The LED indicator on the remote will illuminate during transmission.
- Rango: Ensure you are within the operational range of your receiver (up to 100 meters in open field, but this can be reduced by obstacles like walls, vehicles, or other radio interference).
- Indicador LED: The LED illuminates when a button is pressed, indicating that the remote is transmitting a signal. If the LED does not light up or is dim, the battery may need replacement.
6. Mantenimiento
6.1. Reemplazo de la batería
The remote control is powered by one CR2032 lithium battery (3V). When the LED indicator becomes dim or the remote's range decreases significantly, it is time to replace the battery.
- Abra la Casing: Abra con cuidado el control remoto casing. This usually involves using a small flat-head screwdriver to gently pry open the two halves of the casing, often at a small notch or seam.
- Retire la batería vieja: Locate the CR2032 battery. Note its polarity (+/-). Gently remove the old battery.
- Insertar batería nueva: Insert a new CR2032 battery, ensuring the correct polarity. The positive (+) side typically faces upwards.
- Cerrar Casing: Carefully snap the two halves of the remote control casing nuevamente juntos hasta que esté bien cerrado.
- Prueba: Test the remote control to ensure it functions correctly after battery replacement.
Nota: Deseche las baterías viejas de forma responsable de acuerdo con las regulaciones locales.
6.2. Limpieza
Limpie el control remoto con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar el control remoto.asing o componentes internos.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Remote does not work / LED does not light up. | Batería muerta o baja. | Reemplace la batería CR2032 (consulte la Sección 6.1). |
| Remote works intermittently or has reduced range. | Low battery; interference; remote too far from receiver; environmental obstacles. | Replace battery; move closer to receiver; check for sources of interference (e.g., other radio devices, metal structures); ensure clear line of sight. |
| Remote programmed but system does not respond. | Incorrect programming; receiver issue; remote not compatible with receiver. | Re-program the remote carefully following the manufacturer's instructions (Section 4); check the receiver unit for power and functionality; confirm compatibility with your specific receiver model. |
| LED lights up but system does not respond. | Remote is transmitting, but receiver is not receiving or recognizing the signal. | Verify programming; check receiver antenna; ensure receiver is powered on and functioning correctly. |
8. Información de garantía
Specific warranty details for the FAAC XT02 SLH-DS 787030 remote control are not provided in the product information. Please refer to your purchase documentation or contact the retailer/manufacturer directly for warranty terms and conditions.
9. Atención al cliente
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your FAAC XT02 SLH-DS 787030 remote control, please contact the retailer from whom you purchased the product or visit the official FAAC webSitio para recursos de soporte.