Manual del usuario del probador USB POROMETISTO UT01C

1. Introducción

The POROMETISTO UT01C USB Tester is a versatile diagnostic tool designed for monitoring and analyzing USB-C power delivery. It provides real-time measurements of voltage, current, and power, along with advanced features such as fast charging protocol detection, ripple analysis, and battery capacity tracking. This manual provides detailed instructions for the proper use and maintenance of your UT01C USB Tester.

Image 1.1: The UT01C USB Tester in use, connected between a laptop and a power source, displaying charging parameters.

2. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

• 1 x POROMETISTO UT01C USB Tester
• 1 x Manual de usuario (este documento)
• 1 x caja de embalaje

Image 2.1: The UT01C USB Tester and its included accessories.

3. Producto terminadoview

The UT01C USB Tester is equipped with a color IPS display and intuitive controls for comprehensive power analysis.

Imagen 3.1: Frente view of the UT01C USB Tester, highlighting the display and control buttons.

Características principales:

• Comprehensive Electrical Parameter Testing: Real-time measurement of DC voltage (3.3-30V), current (0-12A), and power (up to 240W). Displays capacity, temperature, ripple analysis, and current direction.
• Amplio soporte para protocolos de carga rápida: Compatible with PD2.0/3.0/3.1 (including AVS/EPR), QC2.0/3.0/4.0+, PPS, and BC1.2. Supports PDO/QC gear spoofing, E-marker simulation, and private protocol triggering.
• Battery Capacity Statistics and Data Storage: Records cumulative battery capacity (mAh) and energy consumption (Wh) with power-off memory. Tracks maximum voltage, current, and power, combined with temperature monitoring.
• Multi-mode Graphical Analysis: Features curve plotting, ripple measurement, and protocol auto-testing functions. Supports real-time spectrum display and data pause analysis with a 5MHz sampfrecuencia de ling.
• Diseño fácil de usar: Color IPS display with gravity rotation, 10kHz dimming, pass-through mode, key shortcuts, brightness adjustment, and automatic screen saver.

4. Configuración

Follow these steps to set up your UT01C USB Tester:

1. Deshacer: Carefully remove the UT01C USB Tester from its packaging.
2. Identificar puertos: The tester has a male USB-C connector (input/output depending on connection) and a female USB-C port (output/input depending on connection).
3. Connect for Testing:
   • To test a power source (charger, power bank): Plug the male USB-C connector of the UT01C directly into the power source's USB-C port.
   • To test a device's charging (phone, laptop): Plug the male USB-C connector of the UT01C into the power source, then connect your device's charging cable to the female USB-C port of the UT01C.
4. Encendido: The tester will automatically power on and display readings once a power source is connected.

5. Instrucciones de funcionamiento

5.1 Medidas básicas

Upon connection, the main screen will display real-time voltage (V), current (A), and power (W). Additional parameters like capacity (mAh/Wh) and temperature may also be visible.

Image 5.1: The UT01C display showing high-precision diagnostic data.

5.2 Navegación por el menú y configuración

The tester features physical buttons for navigation:

• < / > Botones: Used to navigate through menu options or cycle between different display pages.
• Botón OK: Selecciona una opción o confirma una configuración.
• Botón de retroceso: Exits a menu or returns to the previous screen.
• Interruptor APAGADO/ENCENDIDO: Controls power or enters specific test modes.

Selección de idioma:

1. Navigate to the settings interface using the navigation buttons.
2. Locate the language selection option, typically found in the fourth column of the settings menu.
3. Utilice el < or > buttons to select between English and Chinese.
4. Presione el OK Botón para confirmar su selección.

Note: Menu options are indicated by color; deep color signifies unselected, while light color indicates the currently active option.

5.3 Advanced Testing Functions

• Fast Charging Protocol Detection: The tester automatically identifies and displays the active fast charging protocol (e.g., PD, QC, PPS).
• Medición de ondulación: Access this function through the menu to analyze the stability of the power output.
• Curve Plotting: View real-time graphs of voltage, current, and power to observe dynamic changes during charging.

Image 5.2: Dynamic curve display and ripple measurement capabilities.

• Protocol Spoofing and Simulation: The UT01C can simulate various charging protocols (PDO/QC gear spoofing, E-marker simulation, private protocol triggering) to test cable compatibility and charger capabilities. Exercise caution when using these features, as incorrect settings can potentially affect connected devices.

Image 5.3: Illustration of protocol deception increasing charging power.

5.4 Data Logging and Capacity Statistics

The built-in module records cumulative battery capacity (mAh) and energy consumption (Wh). This data is stored even after the device is powered off, allowing for long-term monitoring and analysis of battery and power supply performance.

5.5 Bidirectional Current Testing

The Type-C female port supports both current input and output, enabling the tester to measure current flow in both directions. This is useful for understanding charging and discharging cycles of devices like power banks.

Image 5.4: Bidirectional current testing in action with a power bank.

5.6 E-Marker Data Cable Detection

Utilize this feature to test the performance and capabilities of different USB-C cables, including their maximum power delivery and data transmission speeds, by reading the E-Marker chip data.

Image 5.5: Testing multiple cables and devices with E-Marker detection.

6. Mantenimiento

• Limpieza: Utilice un paño suave y seco para limpiar el dispositivo. Evite usar líquidos o limpiadores abrasivos.
• Almacenamiento: Guarde el probador en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
• Manejo: Handle the device with care to prevent physical damage. The robust CNC metal housing provides protection against dust and drops.

Image 6.1: Industrial-grade protection design of the UT01C.

7. Solución de problemas

• Display is in Chinese: Refer to section 5.2, "Language Selection," to change the display language to English.
• Readings are not displayed: Ensure the tester is securely connected between a functioning power source and a load. Check all cables for proper connection.
• Readings appear inaccurate: Verify that the power source and connected device are within the tester's specified operating ranges (3.3-30V, 0-12A, up to 240W). Ensure connections are stable.
• Text on display is small: The display is compact. Ensure adequate lighting and adjust your viewing angle for better readability.

8. Especificaciones

9. Garantía y soporte

For warranty information, technical assistance, or customer support regarding your POROMETISTO UT01C USB Tester, please contact POROMETISTO customer service. Refer to the product packaging or the official POROMETISTO webSitio para obtener los datos de contacto más actualizados.