Introducción
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your KERDOM Foldable Electric Wheelchair, Model KD-B02. Please read this manual thoroughly before using the wheelchair to ensure proper understanding and to prevent injury or damage.
Información de seguridad
Su seguridad es primordial. Siga siempre las siguientes pautas de seguridad:
- Always ensure the wheelchair is fully unfolded and locked before use.
- Engage the EABS parking system when stationary.
- No exceda la capacidad máxima de peso de 330 libras.
- Evite operar la silla de ruedas en pendientes superiores a 12 grados.
- Regularly inspect tires, brakes, and electrical connections.
- Mantenga las manos y la ropa alejadas de las piezas móviles.
- Use the seat belt at all times.
- Consult a healthcare professional for guidance on safe operation if you have any medical conditions.
Configuración
Desplegar la silla de ruedas
The KERDOM electric wheelchair features a 3-second folding design for portability. To unfold:
- Coloque la silla de ruedas plegada sobre una superficie plana y estable.
- Gently pull the backrest upwards until the frame locks into place.
- Press down on the seat cushion until it is flat and secure.
- Asegúrese de que todos los mecanismos de bloqueo estén activados antes de su uso.
Figure 1: The KERDOM Foldable Electric Wheelchair in its unfolded state, ready for use.
Attaching the Joystick Controller
The 360° joystick controller can be attached to either the left or right armrest for user convenience.
- Locate the mounting bracket on the desired armrest.
- Slide the joystick controller onto the bracket until it clicks into place.
- Secure the controller using the provided screw or locking mechanism.
- Connect the controller cable to the corresponding port on the wheelchair frame.
Figura 2: detallada view of attaching the joystick controller to the armrest.
Conexión de cables de alimentación
Ensure all power cables are securely connected before operating the wheelchair. Incorrect connections can lead to improper function or charging issues.
- Locate the main power cable connectors near the battery compartment.
- Connect the red power cord securely. Failure to do so may result in the charging indicator lighting up while charging, but not actually charging.
- Verify that all motor cables are correctly plugged in. If the wheelchair operates in the opposite direction, check and correct the left and right motor wire connections.
Video 1: Installation and use of electric wheelchairs and the solution of problems in use. This video demonstrates the setup process, including connecting the joystick and power cables, and addresses common issues like incorrect motor direction.
Instrucciones de funcionamiento
Encendido y apagado
- To power on: Press and hold the power button on the joystick controller until the indicator lights illuminate.
- Para apagar: Mantenga presionado el botón de encendido nuevamente hasta que las luces indicadoras se apaguen.
Driving the Wheelchair
The 360° flexible joystick provides precise control over movement.
- Hacia adelante hacia atrás: Gently push the joystick forward or pull it backward.
- Torneado: Empuje el joystick hacia la izquierda o hacia la derecha para conducir.
- Parada: Release the joystick to its neutral position. The EABS parking system will automatically engage, stopping the wheelchair safely.
Figure 3: The intelligent 360° flexible joystick for precise maneuverability, showing controls for balance, steering sensitivity, and safe stopping on inclines.
Speed Adjustment and Horn
- Ajuste de velocidad: Use the '+' and '-' buttons on the joystick controller to increase or decrease the speed. The LED display will show the current speed setting.
- Bocina: Press the horn button on the joystick controller to activate the horn for safety.
Operación en modo manual
To push the wheelchair manually without power, you need to disengage the motors.
- Ensure the handbrake is in the down position.
- Pull out the clutches on both sides of the wheelchair (located near the rear wheels). This disengages the motors, allowing the wheels to move freely.
- To re-engage electric power, push the clutches back in.
Figure 4: Location of the manual brake and clutches for switching between electric and manual modes.
Mantenimiento
Cuidado y carga de la batería
- Cargue la batería completamente antes del primer uso.
- Utilice únicamente el cargador proporcionado.
- No sobrecargue la batería. Desconecte el cargador cuando la batería esté llena.
- Store the wheelchair and battery in a cool, dry place.
- If storing for extended periods, charge the battery every 1-2 months to maintain its lifespan.
Figure 5: The LED display on the joystick shows battery life and speed clearly, aiding in timely charging.
Limpieza y almacenamiento
- Limpie el marco con publicidad.amp paño. Evite el uso de limpiadores abrasivos.
- The breathable seat cushion can be removed for cleaning.
- For storage, fold the wheelchair as demonstrated in the setup section.
- Conservar en un lugar seco y protegido, alejado de la luz solar directa y de temperaturas extremas.
Figure 6: The compact, folded electric wheelchair fits easily into a car trunk for convenient transport and storage.
Cuidado de los neumáticos
The wheelchair is equipped with solid, puncture-resistant tires, eliminating the need for inflation. Periodically check for debris embedded in the treads and remove them to maintain traction.
Solución de problemas
Si encuentra algún problema, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| La silla de ruedas no enciende. | Battery not charged or power cables disconnected. | Ensure battery is charged and all power cables are securely connected. |
| Wheelchair moves in the wrong direction. | Motor wires are plugged in backwards. | Check and correct the left and right motor wire connections. Refer to the setup video. |
| Wheelchair does not move when joystick is pushed. | Clutches are disengaged (manual mode). | Push the clutches on both sides of the wheelchair back in to engage electric mode. |
| Charging indicator lights up but battery doesn't charge. | Red power cord is not securely connected. | Ensure the red power cord is firmly connected. |
Presupuesto
- Modelo: KD-B02
- Capacidad de peso: 330 libras
- Dimensiones del producto: 36.19" de profundidad x 24.8" de ancho x 33.4" de alto
- Peso (sin batería): Aproximadamente 57 libras
- Motor: Dos motores de 250 W (500 W en total)
- Batería: 24V 12Ah de iones de litio
- Material del marco: Hierro, Plástico
- Control: 360° Joystick
- Sistema de frenado: EABS Parking System
- Ruedas antivuelco: Incluido
- Capacidad de pendiente: ≤12°
- Llantas: Puncture-resistant solid tires
Garantía y soporte
KERDOM provides a 12-month warranty for this electric wheelchair. For any queries, technical assistance, or warranty claims, please contact KERDOM's 24/7 US-based customer support. Our quick-response team aims to resolve issues within 24 hours.
Para obtener más información, visite el KERDOM Store.