YUANWIN Smart Video Doorbell Intercom System with 600lb Magnetic Lock - User Manual

1. Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of your YUANWIN Smart Video Doorbell Intercom System. This system includes a 1080P HD video doorbell camera, a 7-inch IPS touch screen Wi-Fi monitor, a 600lb magnetic lock, a power supply controller, an exit button, and a remote control kit, designed to enhance your property's security and access control.

2. Información de seguridad

• Lea atentamente todas las instrucciones antes de la instalación y el uso.
• Asegúrese de que toda la energía esté desconectada antes de realizar cualquier cableado o mantenimiento.
• La instalación debe ser realizada por personal calificado si no está familiarizado con el cableado eléctrico.
• Do not expose the outdoor unit to extreme temperatures or direct water immersion.
• The indoor monitor supports 2.4GHz Wi-Fi only. Ensure your router operates on this frequency for stable connection.
• Mantenga los componentes pequeños fuera del alcance de los niños.

3. Contenido del paquete

Verifique que todos los artículos que se enumeran a continuación estén presentes en su paquete:

• 1x 1080P Video Doorbell Camera (Outdoor Unit)
• 1x 7-inch IPS Touch Screen Wi-Fi Monitor (Indoor Unit)
• 1x 600lb Magnetic Lock
• 1x Power Supply Controller
• 1x Exit Button
• 2x Remote Control Key Fobs
• 1x Remote Control Receiver Module
• 1x Power Cord (for Power Supply)
• Tornillos de montaje y accesorios
• Manual de usuario (este documento)

Image: All components included in the YUANWIN Smart Video Doorbell Intercom System kit, including the doorbell, monitor, magnetic lock, power supply, remote controls, exit button, and power cord.

4. Producto terminadoview

4.1 Outdoor Unit (Video Doorbell Camera)

Imagen: Detallada view of the outdoor doorbell unit, highlighting its dimensions (75mm width, 146mm height, 37mm depth) and key features such as the rainproof cover, microphone, camera, infrared fill light, 13.56MHz card reader, speaker, and call button.

• Cámara: 1080P 2.0MP HD for clear video.
• Luz de relleno infrarroja: Enables night vision for low-light conditions.
• Micrófono y altavoz: Para comunicación de audio bidireccional.
• Botón de llamada: Inicia una llamada al monitor interior.
• Lector de tarjetas: 13.56MHz RFID for IC card access.
• Rainproof Cover: Proporciona protección contra los elementos climáticos.

4.2 Indoor Unit (7-inch Wi-Fi Monitor)

Imagen: Detallada view of the indoor monitor unit, showing its dimensions (200mm width, 140mm height, 20mm depth) and features including the LCD touch screen, speaker, microphone, and TF card slot.

• Mostrar: 7-inch IPS LCD touch screen for intuitive control.
• Conectividad Wi-Fi: Supports 2.4GHz Wi-Fi for Tuya App integration.
• Altavoz y micrófono: For two-way communication with the outdoor unit.
• Ranura para tarjetas TF: For local storage of captured photos and videos.

4.3 600lb Magnetic Lock

Image: The 600lb magnetic lock and its corresponding armature plate, with dimensions indicated (e.g., lock body 250mm length, 49mm width, 25mm height; armature plate 180mm length, 38mm width, 11mm height).

• Fuerza de retención: 600 pounds, providing secure door locking.
• Operación: Electromagnetically controlled, typically failsafe (unlocks when power is removed).

4.4 Power Supply Controller

Image: The power supply controller unit, showing input terminals for AC110V-240V and output terminals for DC12V(4A), along with connections for N.O., GND, N.C., +12V, PUSH, CTRL+, CTRL-, and LED indicators.

• Aporte: AC110V-240V (1A) 50Hz.
• Producción: DC12V (4A).
• Funciones: Provides regulated power to the system components and includes terminals for connecting the magnetic lock, exit button, and other access control devices.

4.5 Remote Control Kit (Receiver and Key Fobs)

Image: The remote control kit, featuring the receiver module with its internal circuitry and connection points (NC, COM, NO, V+, V-), alongside two brown remote control key fobs with red buttons.

• Función: Allows remote unlocking of the magnetic lock.
• Componentes: Includes a receiver module and two wireless key fobs.

4.6 Botón de salida

Image: The green push-to-exit button, showing its dimensions (80mm height, 30mm width) and symbols indicating door opening and a finger pressing the button.

• Función: Provides a convenient way to exit by temporarily disengaging the magnetic lock from inside.

5. Configuración e instalación

Careful planning and correct wiring are essential for the proper functioning of your system. Refer to the wiring diagram below for connections.

5.1 Diagrama de cableado

Image: A detailed wiring diagram illustrating the connections between the indoor monitor, outdoor doorbell, power supply, magnetic lock, exit button, and remote control receiver. It shows AC 110V-220V input to the power supply, which then connects to the magnetic lock, exit button, and remote receiver, with the doorbell and monitor also integrated into the system.

Importante: Ensure all power is off before making any electrical connections. Follow the diagram precisely to avoid damage to components or electrical hazards.

5.2 Pasos de instalación de componentes

1. Outdoor Unit (Doorbell):
   • Mount the rainproof cover to the desired outdoor location using screws.
   • Secure the doorbell unit inside the cover.
   • Connect the doorbell's wiring to the indoor monitor as per the wiring diagram.
2. Indoor Unit (Monitor):
   • Mount the monitor bracket to an indoor wall at a convenient height.
   • Connect the necessary wires from the doorbell and power supply to the monitor.
   • Attach the monitor to its bracket.
3. Cerradura magnética:
   • Install the magnetic lock body on the door frame and the armature plate on the door, ensuring proper alignment. Refer to the image below for a typical installation exampel.
   • Connect the magnetic lock to the power supply controller as shown in the wiring diagram.
   

   Image: An illustration demonstrating the typical installation of a magnetic lock on a door frame, with the main lock unit on the frame and the armature plate on the door itself.
4. Power Supply Controller:
   • Mount the power supply controller in a secure, dry location.
   • Connect the AC power input (110V-240V) to the power supply.
   • Connect the output terminals to the magnetic lock, exit button, and remote control receiver according to the wiring diagram.
5. Exit Button & Remote Control Receiver:
   • Install the exit button on the inside of the door frame.
   • Connect the exit button and the remote control receiver to the power supply controller as indicated in the wiring diagram.

5.3 Tuya App Setup (Wi-Fi Connection)

1. Descargue la aplicación "Tuya Smart" desde la tienda de aplicaciones de su teléfono inteligente.
2. Regístrese o inicie sesión en su cuenta Tuya.
3. On the indoor monitor, navigate to the Wi-Fi settings and connect to your 2.4GHz Wi-Fi network.
4. Follow the app's instructions to add a new device. Select "Video Doorbell" or "Smart Camera" if prompted.
5. The app will guide you through pairing the monitor with your account. This typically involves scanning a QR code displayed on the monitor or entering a device ID.
6. Once connected, you will receive notifications and be able to control the system remotely via the app.

6. Instrucciones de funcionamiento

6.1 Responder una llamada

• When a visitor presses the call button on the outdoor unit, the indoor monitor will ring and display the visitor's video feed.
• En el monitor, toque el ícono "Responder" para iniciar una comunicación bidireccional.
• If using the Tuya App, you will receive a push notification. Tap the notification to answer the video call and communicate with the visitor.

6.2 Monitoreo

• From the indoor monitor, you can view the live feed from the outdoor camera at any time by selecting the camera icon.
• Through the Tuya App, you can access the live camera feed remotely from your smartphone.

6.3 Desbloqueo de la puerta

The system offers multiple methods for unlocking the magnetic lock:

• A través del monitor interior: During a call or while monitoring, tap the "Unlock" icon on the monitor's screen.
• A través de la aplicación Tuya: Durante una llamada o mientras viewing the live feed, tap the "Unlock" button within the app interface.
• Via RFID IC Card: Present a pre-programmed IC card to the card reader on the outdoor doorbell unit.
• Vía control remoto: Press the button on the remote control key fob.
• Via Exit Button: Press the green exit button located inside the door.

6.4 Captura de fotos y vídeos

• The indoor monitor allows you to manually capture photos or record short videos of visitors.
• These recordings are stored on the TF card inserted into the monitor.
• The Tuya App may also offer options for recording or capturing screenshots, which are typically stored on your smartphone or cloud storage (if subscribed).

7. Mantenimiento

• Limpieza: Utilice un paño suave y seco.amp cloth to clean the surfaces of the outdoor unit and indoor monitor. Avoid abrasive cleaners or solvents.
• Cuidado de la lente: Limpie suavemente la lente de la cámara con un paño de microfibra para garantizar una calidad de imagen nítida.
• Actualizaciones de firmware: Periodically check the Tuya App for any available firmware updates for the indoor monitor to ensure optimal performance and security.
• Inspección de cableado: Annually inspect all wiring connections for any signs of wear or corrosion. Ensure connections remain secure.

8. Solución de problemas

9. Especificaciones

10. Garantía y soporte

For warranty information and technical support, please refer to the documentation provided with your purchase or contact YUANWIN customer service through the retailer where the product was purchased. You may also visit the official YUANWIN websitio para obtener más ayuda.