Introducción
This manual provides detailed instructions for the setup, operation, and maintenance of your iTouchless 13 Gallon Automatic Sensor Trash Can, Model SPOS13B-1-N1. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Producto terminadoview
The iTouchless 13 Gallon Automatic Sensor Trash Can features Sensor 2.0 Technology for touchless operation, an AbsorbX Odor Filter for odor control, and a slim, space-saving design. It is powered by either D batteries or an optional AC adapter.

Figura 1: Frente view of the iTouchless 13 Gallon Automatic Sensor Trash Can.

Figura 2: Dimensiones del producto para una colocación óptima.
¿Qué hay en la caja?
- Cuerpo del bote de basura
- Lid with Sensor 2.0 Technology
- Filtro de olores AbsorbX
Configuración
1. Power Installation (Batteries or AC Adapter)
Your trash can can be powered by 4 D-size batteries (not included) or an optional AC adapter (sold separately).
- Localice el compartimiento de la batería en la parte inferior de la tapa.
- Inserte 4 pilas de tamaño D, asegurándose de la polaridad correcta.
- Alternatively, if using the AC adapter, plug it into the designated port on the back of the lid and then into a wall outlet.

Figura 3: Opciones de energía: 4 baterías de tamaño D o adaptador de CA opcional.
2. Odor Filter Installation
The AbsorbX Odor Filter helps neutralize odors. A filter is included with your purchase.
- Abre la tapa del bote de basura.
- Locate the filter compartment on the underside of the lid.
- Insert the AbsorbX Odor Filter into the designated holder.
- Cierre el compartimento del filtro de forma segura.

Figure 4: AbsorbX Odor Filter system for neutralizing smells.
3. Instalación de bolsas de basura
To install a trash bag:
- Retire la tapa del cuerpo del bote de basura.
- Place a standard 13-gallon trash bag into the can, ensuring the top edge of the bag is folded over the rim.
- Secure the trash bag by placing the lid back onto the can, ensuring the bag is tucked neatly under the lid's rim.
Video 1: Demonstrates the unboxing and trash bag installation process for an iTouchless sensor trash can.
Instrucciones de funcionamiento
1. Funcionamiento del sensor de movimiento
The Sensor 2.0 Technology provides reliable, touch-free operation.
- To open the lid: Wave your hand approximately 6 inches above the sensor. The lid will open automatically.
- To close the lid: The lid will close automatically after a few seconds of inactivity.
- Tapa que permanece abierta: The lid is designed to stay open while you are nearby, preventing premature closing during use.

Figure 5: Activating the motion sensor for touchless lid opening.
2. Operación manual
For extended open times or manual control, use the buttons on the lid.
- Botón ABRIR: Press the "OPEN" button to keep the lid open indefinitely.
- CLOSE button: Press the "CLOSE" button to close the lid when it is in the manual open state.
Mantenimiento
1. Odor Filter Replacement
The AbsorbX Odor Filter should be replaced periodically to maintain optimal odor control. Sign up for free text message reminders for replacement.
- Replace the filter every 3 months, or sooner depending on usage and odor levels.
- To replace, open the lid, remove the old filter from its holder, and insert a new AbsorbX Odor Filter.

Figure 6: Free text messaging reminder for filter replacement.
2. Instrucciones de limpieza
To clean the trash can:
- Limpie el exterior con un paño suave y seco.amp paño y detergente suave. Evite los limpiadores abrasivos.
- For the interior, remove the trash bag and wipe down with a damp cloth. Ensure the interior is dry before replacing the bag.
- Do not submerge the lid in water, as this can damage the electronic components.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La tapa no se abre automáticamente. |
|
|
| La tapa se abre o se cierra inesperadamente. |
|
|
| El olor todavía está presente. |
|
|
Presupuesto
| Característica | Detalle |
|---|---|
| Marca | sin contacto |
| Número de modelo | SPOS13B-1-N1 |
| Capacidad | 13 galones |
| Color | Coal Black, Silver |
| Mecanismo de apertura | Sensor de movimiento |
| Material | Plástico |
| Usos recomendados | Interior |
| Tipo de habitación | Classroom, Garage, Kitchen, Laundry Room, Living Room |
| Características especiales | Commercial, Leakproof, Motion Sensor, Odor Seal, Quiet Close |
| Forma | Rectangular |
| Tipo de acabado | Inconcluso |
| Peso del artículo | 6 libras |
| Dimensiones del producto | 16" de largo x 11.3" de ancho x 26.4" de alto |
Garantía y soporte
For questions, parts, or warranty information, please visit the official iTouchless websitio o póngase en contacto con el servicio de atención al cliente.
Soporte en línea: itouchless.com/SPO13
Conserve su comprobante de compra para cualquier reclamo de garantía.