ANTHBOT MGA01

ANTHBOT Genie Robot Lawn Mower Garage

Modelo: MGA01

Your Lawn, Protected

1. Producto terminadoview

The ANTHBOT Genie Robot Lawn Mower Garage (Model MGA01) is designed to provide essential protection for your compatible ANTHBOT Genie robot lawn mower. This durable accessory shields your mower from harsh weather conditions, including sun and rain, extending its lifespan and maintaining its performance. It is specifically designed to be compatible with ANTHBOT Genie600, Genie1000, and Genie3000 robot lawn mowers, ensuring seamless integration without obstructing signals or connectivity.

ANTHBOT Genie Robot Lawn Mower Garage with a robot mower inside

Image: ANTHBOT Genie Robot Lawn Mower Garage with a compatible robot mower docked inside.

2. Contenido del paquete

Upon unboxing your ANTHBOT Genie Robot Lawn Mower Garage, please ensure all the following components are present:

  • Garage Roof Panels (A & B)
  • Componentes del marco de soporte
  • Mounting Screws and Stakes
  • Manual de instrucciones
Components of the ANTHBOT Genie Robot Lawn Mower Garage laid out

Image: All components of the ANTHBOT Genie Robot Lawn Mower Garage laid out for assembly.

3. Configuración e instalación

The ANTHBOT Genie Robot Lawn Mower Garage is designed for quick and easy installation. Follow these steps to set up your garage:

  1. Montar el marco: Connect the support frame components according to the diagrams in the included instruction manual. Ensure all connections are secure.
  2. Fijar los paneles del techo: Securely fasten the garage roof panels (A and B) to the assembled support frame using the provided screws.
  3. Position the Garage: Place the assembled garage over your ANTHBOT Genie Robot Lawn Mower's charging station. Ensure the garage is centered and provides adequate clearance for the mower to enter and exit freely.
  4. Fijar a tierra: Use the provided mounting stakes to firmly anchor the garage to the ground. This prevents movement due to wind or accidental bumps.
  5. Verificar autorización: Double-check that the garage does not interfere with the mower's movement, charging contacts, or any signal transmission components (e.g., RTK station if applicable). The design ensures no blocking to signals or connectivity.
Assembled ANTHBOT Genie Robot Lawn Mower Garage

Image: The assembled ANTHBOT Genie Robot Lawn Mower Garage, ready for use.

Dimensions of the ANTHBOT Genie Robot Lawn Mower Garage

Image: Detailed dimensions of the ANTHBOT Genie Robot Lawn Mower Garage for proper placement.

4. Operación

The ANTHBOT Genie Robot Lawn Mower Garage operates passively, providing continuous protection for your mower. Once installed, no further manual operation is required for the garage itself. Your robot lawn mower will automatically dock and undock from its charging station, utilizing the garage for shelter.

  • The garage is designed to allow the robot mower to enter and exit without obstruction.
  • It provides shade from direct sunlight, preventing overheating and UV damage.
  • It protects the mower from rain, snow, and other precipitation, safeguarding its electronic components.

5. Mantenimiento

To ensure the longevity and effectiveness of your ANTHBOT Genie Robot Lawn Mower Garage, periodic maintenance is recommended:

  • Limpieza: Regularly wipe down the exterior of the garage with a damp cloth to remove dirt, dust, and debris. Avoid abrasive cleaners that could damage the finish.
  • Inspección: Periodically check the mounting screws and stakes to ensure they remain tight and secure. Re-tighten if necessary.
  • Comprobación de autorización: Ensure that no vegetation or other obstacles have grown to obstruct the mower's path into or out of the garage.

6. Solución de problemas

If you encounter any issues with your ANTHBOT Genie Robot Lawn Mower Garage, consider the following:

  • Mower Obstruction: If the mower struggles to enter or exit, check for any misalignments of the garage or new obstacles in its path.
  • Problemas de estabilidad: If the garage appears unstable, ensure all ground stakes are fully inserted and tightened. Consider relocating to a firmer surface if necessary.
  • Interferencia de señal: The garage is designed not to block signals. If you experience mower connectivity issues, verify the RTK station placement and mower settings, as the garage is unlikely to be the cause.

7. Especificaciones

AtributoDetalle
MarcaANTHBOT
ModeloMGA01
MaterialAcero inoxidable
ColorGris
Dimensiones del producto (Pr. x An. x Al.)25" de profundidad x 11" de ancho x 16" de alto
CompatibilidadANTHBOT Genie600/Genie1000/Genie3000 Robot Lawn Mower
Requiere ensamblaje
Características principalesProtects from sun and rain, sturdy and durable, easy to install, no blocking to signals or connectivity.

8. Garantía y soporte

For any questions, technical assistance, or warranty claims regarding your ANTHBOT Genie Robot Lawn Mower Garage, please contact ANTHBOT customer support. While specific warranty details for the garage are not provided here, ANTHBOT generally offers robust support for its products.

  • APP Live Chat: Access support directly through the ANTHBOT application.
  • Soporte por correo electrónico: Contact the technical service team via email for detailed inquiries.
  • Equipo de Servicio Técnico: Dedicated professionals are available to assist with product-related issues.

Please refer to your product's main instruction manual or the ANTHBOT webSitio para obtener la información de garantía y los detalles de contacto más actualizados.

© 2026 ANTHBOT. Todos los derechos reservados.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.