LNRYY 12-inch Wireless Motion Sensor Under Cabinet Lights (4-Pack)

1. Producto terminadoview

The LNRYY 12-inch Wireless Motion Sensor Under Cabinet Lights provide convenient and adaptable lighting for various indoor spaces. These rechargeable LED lights feature motion sensing capabilities, three adjustable color temperatures, and dimmable brightness, offering a versatile lighting solution.

Figure 1: LNRYY 12-inch Wireless Motion Sensor Under Cabinet Lights (4-Pack) showing different color temperatures.

2. Contenido del paquete

Verifique que todos los artículos estén presentes en su paquete:

• 4 x Under Cabinet Lights (12-inch)
• 8 x Adhesive Metal Plates
• 4 x USB-Type C Charging Cables
• 1 x Manual de instrucciones
• 1 x caja de embalaje

3. Configuración e instalación

3.1 Carga inicial

Before first use, fully charge each light using the provided USB-Type C charging cable. The charging indicator will change color (e.g., red to green) when fully charged.

3.2 Montaje de las luces

The lights can be installed using either magnetic attachment or adhesive metal plates.

1. Prepare la superficie: Clean and dry the desired installation area thoroughly. Ensure it is smooth and free of dust or grease.
2. Attach Metal Plates: Peel the protective film from one side of an adhesive metal plate. Firmly press the adhesive side onto the cleaned surface. Repeat for all desired mounting locations.
3. Montar la luz: The lights have built-in magnets. Align the light with the installed metal plate and allow the magnets to secure it in place.

The magnetic attachment allows for easy removal for recharging or repositioning.

Figure 2: Illustration of USB-C charging and magnetic installation.

4. Instrucciones de funcionamiento

4.1 Modes and Controls

Each light features a touch control button and a motion sensor. The light offers three operating modes:

• AUTO (Modo de sensor de movimiento): In dark or low-light conditions, the light will automatically turn on when human movement is detected within a 10ft/120° range. It will turn off automatically after 20 seconds of no motion.
• ON (Always-On Mode): The light remains continuously illuminated. This mode is suitable for tasks requiring constant light.
• OFF (Turn Off): La luz está completamente apagada.

Cycle through these modes by pressing the touch control button on the light.

Figure 3: Light controls and features.

4.2 Ajuste de la temperatura de color

The lights offer three color temperature options: White Light, Warm Light, and Natural Light. Use the touch control button to cycle through these options to match your preference or environment.

Figure 4: Demonstrating 3 color temperatures and brightness adjustment.

4.3 Ajuste del brillo

The brightness can be adjusted from 50% to 100%. This allows for customization based on your lighting needs, from subtle ambient light to brighter task lighting. Use the touch control button to adjust brightness.

Figura 5: Niveles de brillo ajustables.

5. Mantenimiento

5.1 Recarga

When the battery is low, the light's performance may diminish. To recharge, simply detach the light from its magnetic mounting plate and connect it to a power source using the provided USB-Type C cable. A full charge typically takes approximately one hour.

• Modo de detección de movimiento: Battery can last for approximately 30 days.
• Modo siempre encendido: Battery can last for approximately 9 hours at 100% brightness.

5.2 Limpieza

Wipe the surface of the lights with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish or electronic components.

6. Solución de problemas

• La luz no se enciende: Ensure the light is charged. Check the selected operating mode (AUTO, ON, OFF).
• El sensor de movimiento no se activa: Verify the light is in AUTO mode. Ensure there is sufficient darkness for the sensor to activate. The sensor has a range of 10ft/120°.
• Duración de la batería corta: Frequent use in Always-On mode or in brightly lit areas (where the motion sensor might be constantly active due to ambient light fluctuations) can reduce battery life. Ensure the light is fully charged.
• Luz parpadeante: Recharge the light. If flickering persists, contact customer support.

7. Especificaciones

8. Garantía y soporte

Para obtener información sobre la garantía o asistencia técnica, consulte el sitio web oficial del fabricante. websitio o contacte con su departamento de atención al cliente. Los datos de contacto suelen encontrarse en el embalaje del producto o en la información del fabricante. websitio.