BSMOOM B04 6000A Jump Starter with 150PSI Air Compressor User Manual

1. Introducción

The BSMOOM B04 is a versatile portable device designed to provide emergency jump-starting for vehicles and inflate tires. It features a powerful 6000A peak current for starting various engines and an integrated 150PSI air compressor. This manual provides essential instructions for safe operation, maintenance, and troubleshooting.

Figure 1: BSMOOM B04 Jump Starter and Air Compressor

2. Información de seguridad

Lea todas las advertencias e instrucciones de seguridad antes de usar este producto. El incumplimiento de estas instrucciones podría provocar descargas eléctricas, incendios o lesiones graves.

• No utilice el arrancador si está dañado.
• Mantener fuera del alcance de los niños.
• No arranque con pinzas una batería congelada.
• Ensure proper polarity when connecting jumper cables (red to positive, black to negative).
• Remove jumper cables immediately after the vehicle starts.
• No exponga la unidad a la lluvia ni a condiciones de humedad.
• Evite operar en atmósferas explosivas, como en presencia de líquidos, gases o polvos inflamables.
• The unit features 10 built-in safety protections including over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, sobrecarga, a prueba de chispas y carga inversa.

Figure 2: BSMOOM B04 Safety Protections

3. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

• BSMOOM B04 Car Jump Starter
• Cl de batería de servicio pesadoamps
• Cable de carga USB-C
• Estuche de almacenamiento de EVA
• Manguera de inflado
• Multi-Purpose Air Nozzles
• Manual de usuario (este documento)

4. Producto terminadoview y componentes

Familiarize yourself with the main components and display features of your BSMOOM B04 unit.

Figure 3: BSMOOM B04 LCD Display Features

The 3.4-inch LCD display provides real-time information including battery level, inflator mode, tire pressure, and preset values. It also indicates charging status, USB output status, and temperature warnings.

5. Configuración

5.1 Carga inicial

It is recommended to fully charge the BSMOOM B04 unit before its first use to ensure optimal performance and battery longevity. Use the provided USB-C charging cable.

• Connect the USB-C charging cable to the unit's input port.
• Conecte el otro extremo del cable a un adaptador de corriente USB adecuado (no incluido).
• La pantalla LCD mostrará el progreso de la carga.

5.2 Charging Reminders and Maintenance

• Always ensure the unit is charged above 25% before attempting to jump-start a vehicle.
• Recharge the unit every 2-3 months, even if not in use, to activate the battery and maintain its health.

6. Instrucciones de funcionamiento

6.1 Arrancar un vehículo con ayuda de un puente

The BSMOOM B04 can jump-start all gas engines and up to 10.0L diesel engines. Ensure the unit has sufficient charge (above 25%).

1. Insert the starting cable into the jump starter's output port.
2. Conecte el rojo (+) clamp al terminal positivo de la batería del vehículo.
3. Conecte el negro (-) clamp to the negative terminal of the vehicle's battery. The intelligent safety detection cables will light up green when properly connected.
4. Arranque el motor de su vehículo.
5. Retire inmediatamente el clamps from the vehicle battery once the engine starts.

Figure 4: Jump Starting Procedure

6.2 Uso del compresor de aire

The integrated 150PSI air compressor can inflate various items, including car, bike, and motorcycle tires, as well as balls and mattresses.

1. Assemble the inflation hose to the unit.
2. Connect the hose to the tire valve or appropriate inflatable item using the multi-purpose air nozzles.
3. Use the LCD display to preset the desired pressure (PSI, BAR, or KPA) using the '+' and '-' buttons.
4. Press the power button to start inflation. The compressor will automatically shut off when the preset pressure is reached.

Figure 5: Tire Inflation with BSMOOM B04

6.3 Uso de la luz LED

La luz LED incorporada ofrece tres modos para diversas situaciones:

• Normal Illumination: Para iluminación general.
• SOS Emergency Signal: Flashes a distress signal.
• Strobe Warning: Provides a flashing warning light.

Refer to the unit's buttons for cycling through the light modes.

Figura 6: Modos de luz LED

6.4 Uso como banco de energía portátil

The BSMOOM B04 can also serve as a portable power bank with its 26800mAh rechargeable battery, featuring USB-A outputs and a Type-C input/output for charging other electronic devices.

• Connect your device's charging cable to one of the USB output ports on the BSMOOM B04.
• La unidad comenzará a cargar su dispositivo.

Figure 7: Charging External Devices

7. Mantenimiento

Proper maintenance ensures the longevity and reliability of your BSMOOM B04 unit.

• Limpieza: Limpie la unidad con un paño seco y suave. No utilice productos químicos agresivos ni limpiadores abrasivos.
• Almacenamiento: Store the unit in its EVA storage case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cuidado de la batería: Recharge the unit every 2-3 months to keep the battery active and prevent deep discharge.

8. Solución de problemas

If you encounter issues with your BSMOOM B04, refer to the following common problems and solutions:

9. Especificaciones

Figura 8: Rendimiento en todo tipo de clima

10. Garantía y soporte

BSMOOM is committed to product quality and customer satisfaction.

• Garantía: The BSMOOM B04 comes with a 1-year quality assurance warranty from the date of purchase.
• Atención al cliente: For any inquiries or assistance, please contact BSMOOM customer support, available 24/7. Refer to the product packaging or official websitio para detalles de contacto.