Manual del usuario de la grabadora láser SCULPFUN S30 Pro y pantalla táctil TS1

1. Producto terminadoview

The SCULPFUN S30 Pro is a high-performance 10W diode laser engraver designed for precision engraving and cutting of various materials. It features an automatic air assist system for enhanced cutting performance and comes bundled with the SCULPFUN TS1 Touch Screen for offline control and Wi-Fi connectivity. This machine is suitable for engraving and cutting wood, MDF, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, and dark stone.

Figure 1: SCULPFUN S30 Pro Laser Engraver with TS1 Touch Screen. This image shows the complete laser engraving system, including the main engraver unit, the external air pump, and the TS1 touch screen.

Características principales:

• 10W Diode Laser Output: Capable of cutting 10mm wood or 5mm acrylic in a single pass with a 0.06x0.08mm ultra-fine compression spot for detailed engraving.
• Asistencia de aire automática: Mainboard-controlled air pump (12V, 30L/min) with an advanced high-pressure metal nozzle, intelligently controlled via LightBurn software (M8 command) to significantly improve cutting speed and performance.
• SCULPFUN TS1 Touch Screen: 3.5-inch capacitive touch screen (480x320 resolution) for offline engraving, Wi-Fi connectivity, and real-time slicing via the SCULPFUN mobile app.
• Área de trabajo ampliable: Standard 410x400mm engraving area, expandable up to 935x905mm with optional extension kits.
• Construcción robusta: Features an industrial-grade linear rail for high precision and durability.
• Protección ocular: Equipped with a detachable laser protection cover.

2. Información de seguridad

Operating a laser engraver involves potential hazards. Always adhere to the following safety guidelines to prevent injury or damage.

• Protección ocular: Always wear the provided laser safety goggles when the laser is operating. Never look directly at the laser beam.
• Ventilación: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving/cutting. Consider an exhaust system.
• Peligro de incendio: Laser engraving/cutting can ignite flammable materials. Do not leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Compatibilidad de materiales: Only engrave or cut materials specified in the product description. Avoid materials that produce toxic fumes or can easily catch fire (e.g., PVC, vinyl).
• Niños y mascotas: Mantenga a los niños y a las mascotas alejados del área de operación.
• Seguridad eléctrica: Asegúrese de que la fuente de alimentación esté correctamente conectada y conectada a tierra. No lo utilice con las manos mojadas ni enamp condiciones.
• Parada de emergencia: Familiarícese con la ubicación del interruptor de encendido para el apagado inmediato en caso de emergencia.

3. Configuración y montaje

Before operating the SCULPFUN S30 Pro, careful assembly is required. Refer to the included "Step 1-6 Installation package" and the physical manual for detailed visual instructions. The following outlines the general steps.

3.1 Desembalaje e inspección

Desembale con cuidado todos los componentes y compruébelos con la lista de embalaje:

• 1 x S30 Pro laser
• 1 x Laser repair kit
• 1 x 12V Automatic air pump
• 3 x A4 size 3mm wood board
• 2 x Limit switches
• 1 x 12V 5A Power adapter
• 1 x Cable de alimentación
• 1 cable USB
• 1 x Air pipe
• 1 x Installation toolkit
• 1 x Laser goggles
• 1 x A4 Metal backing plate
• Step 1-6 Installation package
• 1 manual de instrucciones
• 1 x conjunto de eje X
• 2 x X Profiles
• 2 x Y Profiles
• 1 x Control box assembly
• 3 pies de apoyo.
• 1 x Touch screen (SCULPFUN TS1)
• 1 x Power cord (for TS1)
• 1 x SD card (for TS1)
• 1 x Card reader (for TS1)
• 1 x Manual (for TS1)

3.2 Montaje Mecánico

Follow the step-by-step instructions in the provided installation package to assemble the frame, X-axis, Y-axis, and control box. Ensure all screws are tightened securely.

Figura 2: Sobreview of SCULPFUN S30 Series components and innovative technologies. This diagram highlights the industrial-grade linear rail, S30 Pro 10W dual-laser, air assist, automatic air assist pump, X&Y axis expansion kit compatibility, replaceable lens, and 32-bit air assist mainboard.

3.3 Instalación del módulo láser

Install the S30 Pro laser module onto the X-axis assembly. Ensure it is securely fastened and the laser protection cover is in place.

Figure 3: Illustration of the 10W Powerful Dual-laser Technology. This image demonstrates how two 6W lasers are combined to achieve a 10W output with a super long effective cutting range and a fine 0.06x0.08mm laser focus.

3.4 Conexión del sistema de asistencia de aire

Connect the air pipe from the 12V automatic air pump to the air assist nozzle on the laser module. Ensure the air pump is connected to the mainboard's designated port.

Figure 4: Close-up of the Built-in High Pressure Air Assist Nozzle. This image illustrates the advanced fluid mechanics design of the S30 Pro nozzle, which enhances airflow for improved cutting performance.

3.5 SCULPFUN TS1 Touch Screen Connection

Connect the SCULPFUN TS1 touch screen to the laser engraver using the provided USB cable. Power on the TS1 using its dedicated power cord.

Figure 5: SCULPFUN TS1 Touch Screen for Laser Engravers. This image highlights the TS1's WiFi function, 3.5-inch capacitive screen, and wide compatibility with S30 series machines.

Figure 6: SCULPFUN TS1 WiFi Functionality. This image shows the TS1 connected to the engraver and interacting with the SCULPFUN mobile phone app for wireless control and file creación.

3.6 Instalación del software

The S30 Pro supports various operating software:

• LightBurn (recommended, with air assist function M8)
• GRBL láser
• Benbox
• Controlador Grbl
• LiteFire

These software packages support Windows and MAC systems. Supported file formats include NC, BMP, JPG, PNG, DXF, and other image formats. Install your preferred software and configure it for the S30 Pro.

4. Instrucciones de funcionamiento

4.1 Preparación para el grabado/corte

1. Colocación de materiales: Place the material to be engraved or cut on the metal backing plate. Ensure it is flat and securely positioned within the working area.
2. Ajuste de enfoque: Adjust the laser focus using the fixed focus column and sliding device to achieve the optimal focal point for your material.
3. Configuración del software: Open your chosen engraving software (e.g., LightBurn). Import or create your design.
4. Configuración de parámetros: Set the appropriate laser power, speed, and passes based on the material type and desired outcome. Refer to material test guides for optimal settings.
5. Control de asistencia de aire: For cutting operations, ensure the automatic air assist is enabled in your software (e.g., M8 command in LightBurn). For engraving, air assist may be turned off for finer details or specific material requirements.

Figure 7: Automatic Controlled Air Assist in LightBurn. This image demonstrates how the air assist can be intelligently controlled (ON/OFF) via the LightBurn software's M8 button, showing its effect on cutting and engraving.

Figure 8: Comparison of Manual vs. Automatic Air Assist. This image illustrates the difference in results (clean edge vs. burnt edge) when air assist is ON or OFF for cutting and engraving, emphasizing the efficiency of automatic control.

4.2 Starting an Operation (PC/Mac Connected)

1. Ensure the engraver is connected to your computer via USB.
2. In your software, click the "Start" or "Run" button to begin the laser operation.
3. Supervise el proceso de cerca.

4.3 Offline Operation (SCULPFUN TS1 Touch Screen)

The TS1 touch screen enables engraving without a direct computer connection.

1. Preparar File: Guarda tu grabado file (e.g., G-code) to the SD card provided with the TS1.
2. Insertar tarjeta SD: Insert the SD card into the TS1 touch screen.
3. Seleccionar File: On the TS1 interface, navigate to the "Carving" or "Files" section and select your desired file.
4. Comenzar a grabar: Follow the on-screen prompts to initiate the engraving process.

4.4 Wi-Fi Connectivity (SCULPFUN TS1 and Mobile App)

For advanced control and real-time slicing, connect the TS1 to Wi-Fi and use the SCULPFUN mobile app.

1. Connect TS1 to Wi-Fi: On the TS1, go to "Set Up" and configure Wi-Fi settings to connect to your local network.
2. Descargar aplicación: Download the SCULPFUN mobile app on your smartphone.
3. Emparejar dispositivo: Open the app and follow instructions to pair with your TS1.
4. Control and Slice: Use the app for wireless control, file management, and real-time slicing functions.

5. Mantenimiento

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S30 Pro.

• Limpiar la lente del láser: Periodically clean the laser lens using a soft, lint-free cloth and lens cleaning solution. A dirty lens can reduce laser power and engraving quality.
• Clean Air Assist Nozzle: Ensure the air assist nozzle is free from debris and residue to maintain optimal airflow.
• Lubricar rieles lineales: Apply a small amount of lubricant to the industrial-grade linear rails occasionally to ensure smooth movement of the laser module.
• Clean Machine Frame: Wipe down the machine frame to remove dust and debris.
• Comprobar conexiones: Periodically inspect all electrical and air pipe connections for looseness or damage.
• Laser Repair Kit: Utilize the provided laser repair kit for minor maintenance or replacement of specific laser components as instructed in the detailed manual.

6. Solución de problemas

Esta sección aborda problemas comunes que podrías encontrar.

7. Especificaciones

7.1 SCULPFUN S30 Pro Laser Engraving Machine

• Modelo del producto: SCULPFUN S30 Pro
• Potencia de salida del láser de diodo: 10W (energía luminosa)
• Enfoque láser: 0.06x0.08 mm
• Longitud de onda del láser: 455 ± 5nm
• Método de enfoque: Columna de enfoque fijo + dispositivo deslizante
• Laser Protection Cover: Desmontable, ajustable
• Entrada de energía: 100-240 V CA, 50/60 Hz
• Potencia de salida: 12 V 7 A
• Precisión del grabado: 0.005 mm
• Tamaño del área de grabado: Standard 410x400mm (expandable to 935x400mm or 935x905mm)
• Potencia eléctrica de la máquina: Aproximadamente 60W
• Tipo de bomba de aire: Mainboard-controlled, 12V, flow 30L/min
• Diámetro interior de la manguera de aire: 7.5 mm
• placa base: 32-bit air-assisted, reserved for Bluetooth and SD card offline control (upgrade package sold separately)
• Software operativo: LightBurn (M8 air assist), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire
• Sistema operativo compatible: Ventanas, MAC
• Apoyado File Formatos: NC, BMP, JPG, PNG, DXF, etc.
• Transmisión de datos: Conexión USB o conexión inalámbrica Bluetooth
• Dimensiones del producto: 18.11 x 18.11 x 6.69 pulgadas
• Peso del paquete: 6.85 kilos
• Certificaciones: CE, FCC, RoHS, FDA, ICE

7.2 SCULPFUN TS1 Touch Screen

• Material del producto: ABS + PC
• Tamaño de pantalla: 3.5 pulgadas
• Material de la pantalla: Pantalla tactil capacitiva
• Resolución de pantalla: 480x320
• Tamaño del producto: 126 x 89 x 25 mm
• Peso del producto: 130 gramos

8. Garantía y soporte

Para obtener información sobre la garantía, asistencia técnica o consultas de servicio, consulte el sitio web oficial de SCULPFUN. webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su recibo de compra como comprobante.

Fabricante: ESCULTURA

Fecha de primera disponibilidad: 3 de septiembre de 2024

Para obtener más ayuda, visite el Tienda SCULPFUN en Amazon.