Deerma Cordless Stick Vacuum Cleaner User Manual

1. Introducción

This user manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your Deerma 590W Self Emptying Anti-Tangle Cordless Stick Vacuum Cleaner. Please read this manual thoroughly before first use and keep it for future reference.

2. Instrucciones de seguridad importantes

Siga siempre las precauciones básicas de seguridad al utilizar aparatos eléctricos para reducir el riesgo de incendio, descarga eléctrica o lesiones.

• No utilizar en exteriores ni sobre superficies mojadas.
• No permita que se utilice como juguete. Se requiere especial atención cuando lo utilicen niños o cerca de ellos.
• Úselo únicamente como se describe en este manual. Utilice únicamente los accesorios recomendados por el fabricante.
• No lo utilice si el cable o el enchufe están dañados. Si el aparato no funciona como debería, se ha caído, se ha dañado, se ha dejado al aire libre o se ha sumergido en agua, devuélvalo a un centro de servicio.
• No tire del cable ni lo transporte, no lo use como manija, no cierre una puerta sobre el cable ni lo tire por bordes o esquinas filosos. No pase el aparato por encima del cable. Mantenga el cable alejado de superficies calientes.
• No desenchufe el aparato tirando del cable. Para desenchufarlo, sujete el enchufe, no el cable.
• No manipule el enchufe ni el aparato con las manos mojadas.
• No introduzca ningún objeto en las aberturas. No utilice el aparato si alguna de las aberturas está bloqueada; manténgalo libre de polvo, pelusa, pelos y cualquier cosa que pueda reducir el flujo de aire.
• Mantenga el cabello, la ropa suelta, los dedos y todas las partes del cuerpo lejos de las aberturas y piezas móviles.
• No recoja nada que esté ardiendo o humeando, como cigarrillos, fósforos o cenizas calientes.
• No lo utilice para recoger líquidos inflamables o combustibles, como gasolina, ni lo utilice en áreas donde pueda haberlos.
• No lo use sin el recipiente para polvo y/o los filtros en su lugar.
• Apague todos los controles antes de desenchufar.
• Tenga especial cuidado al limpiar escaleras.
• Store the appliance indoors. Put the appliance away after use to prevent accidents.

3. Componentes del producto

The Deerma T50 Station vacuum cleaner comes with various components for versatile cleaning.

• 

  Image: All components of the Deerma T50 Station vacuum cleaner, including the main unit, base station, various brushes, and accessories.

  • Unidad principal (aspiradora de mano)
  • Base Station (for charging and self-emptying)
  • Manguera de extensión
  • Cepillo eléctrico para suelos
  • Electric Carpet Brush
  • Cepillo de pelo para mascotas
  • 2-in-1 Long Crevice Nozzle
  • Wide-mouth Soft Brush
  • Hair Screw Tool
  • Bolsa de polvo (x2)
  • Manual de usuario
  • Adaptador

4. Guía de configuración

4.1 Carga inicial

Before using your Deerma T50 Station for the first time, it is recommended to fully charge the device.

1. Connect the base station to a power source.
2. Place the main vacuum unit onto the base station, ensuring the two sets of charging contacts are in full contact.
3. When charging, the battery level indicator light on the screen will flash. The screen will turn off 1 minute after the device is fully charged.

Video: Demonstrates initial charging and battery pack installation. Note: The vacuum cleaner cannot work while being charged.

4.2 Instalación del paquete de baterías

Para instalar la batería:

1. Align the battery pack with the handle bayonet mount on the main unit.
2. Push it forward forcefully until you hear two "click" sounds, indicating secure installation.

Refer to the video above for visual guidance on battery pack installation.

4.3 Choosing and Attaching Brush Heads

The Deerma T50 Station comes with 7 different vacuum brush heads for various cleaning needs.

• 

  Imagen: Más alláview of the main unit, base station, and all included brush heads and accessories.

For Daily Floor Cleaning (Floor Brush):

1. Insert the extension hose into the main unit in the correct position.
2. Then insert the floor brush head into the extension hose in the correct position. A "click" sound indicates that it is installed properly.

Refer to the video in the "Setup Guide" section for visual guidance on attaching the floor brush.

For Carpet Cleaning (Carpet Brush):

If you need to clean carpets, you can press the release button on the floor brush to take it out, and then insert the carpet brush into the extension tube in the correct position.

• 

  Image: The carpet brush showing the adjustable air release valve. When the valve is on the right side, it is suitable for picking up soybean-size items and easy to push on carpet. When it is in the middle, it is suitable for sucking particles similar to rice. When it is on the left side, it is suitable for sucking particles similar to dust or millet.

Adjust the air release valve of the carpet brush to control the size of the particles to be sucked in:

• Lado derecho: Suitable for picking up soybean-size items and easy to push on carpet.
• Medio: Suitable for sucking particles similar to rice.
• Lado izquierdo: Suitable for sucking particles similar to dust or millet.

Refer to the video in the "Setup Guide" section for visual guidance on attaching the carpet brush.

Direct Attachment to Main Unit:

If there is no need to connect with the extension hose, you can press the release button on the extension hose and pull it out. The 2-in-1 long crevice nozzle, hair screw tool, and wide-mouth soft brush can be directly inserted into the main body of the machine. A "click" sound indicates that they are installed properly.

• 

  Image: The main unit with various attachments, including the 2-in-1 long crevice nozzle, hair screw tool, and wide-mouth soft brush.

• 2-in-1 Long Crevice Nozzle: Hold down the switch button on the suction head, and you can switch between the brush and the crevice nozzle at will. It is suitable for narrow areas such as the gaps of sofas.
• Herramienta para tornillos de cabello: Can deeply clean long hair, pet hair and the dust hidden in mattresses and deep inside sofas.
• Wide-mouth Soft Brush: Suitable for quickly cleaning the surface dust in homes and car interiors.

Refer to the video in the "Setup Guide" section for visual guidance on attaching these tools.

Using the Extension Hose with other tools:

The non-marking soft brush and the comb brush need to be connected through a 60cm extension hose.

1. Insert the extension hose into the main body of the machine.
2. Attach the desired brush head to the other end of the extension hose.

• 

  Image: Non-marking soft brush and comb brush accessories.

• Non-marking Soft Brush: Suitable for cleaning hard-to-clean places such as computer keyboards and car central control panels. Hold the brush cover and quickly clean the dust on the brush bristles by pushing and rubbing.
• Comb Brush: Suitable for cleaning the floating hair on the surface of pets. Push it upward, and the hair-separating key can make the hair separate from the brush teeth and be automatically sucked into the pipeline.

Refer to the video in the "Setup Guide" section for visual guidance on using these tools with the extension hose.

5. Operar la aspiradora

5.1 Encendido/apagado y selección de modo

To turn on the device, briefly press the power button. The standard mode is enabled by default when it is turned on.

Briefly press the mode button to cyclically switch the modes among the powerful mode, energy-saving mode and standard mode, and the corresponding icons will light up.

Long press the mode button for 5 seconds, and the product will operate in the Turbo mode. (Attention: The Turbo mode cannot be switched when the battery level is lower than 20%.)

• 

  Image: The display panel of the vacuum cleaner showing Eco mode, Standard mode, Boost mode, and Turbo mode indicators.

Refer to the video in the "Operating the Vacuum Cleaner" section for visual guidance on power and mode selection.

5.2 Operación de limpieza

After adjusting to the appropriate gear, hold the handle and push or pull the vacuum cleaner to start cleaning.

• 

  Image: A person using the Deerma T50 Station vacuum cleaner on a hard floor, highlighting the green light for dust detection.

Refer to the video in the "Operating the Vacuum Cleaner" section for visual guidance on cleaning.

6. Limpieza y mantenimiento

Regular cleaning and maintenance ensure optimal performance and longevity of your vacuum cleaner.

6.1 Cleaning the Dust Cup

After using the product, there are three ways to clean the garbage in the dust cup:

Method 1: Automatic Cleaning via Base Station

Place the machine on the base station. Press the power button of the base station to start the base station. The top rod of the dust cup will automatically open the dust cup and recycle the garbage inside the dust cup. After the recycling is completed, you can also press the power button again to turn off the power of the base station.

• 

  Image: The self-emptying process of the Deerma T50 Station, showing the vacuum docked and dust being transferred to the base station.

When the base station is in a normal state, the indicator light shows green. When the dust bag is full, the indicator light shows red. When it is necessary to replace the cleaning base station, first turn off the base station, pull out the power plug, use both hands to hold on the both sides above the front cover assembly, gently pull them apart in the direction indicated by the arrow in the illustration, and then take out the front cover assembly upward. Pull out the old dust bag forcefully and throw it into the trash bin. Pull out the motor air inlet grid assembly forcefully, and then take out the filter cotton. Pinch the handle of the filter element at the bottom of the base station, rotate it clockwise, and pull out the filter element of the base station downward. Then take out the sound-absorbing cotton from the filter element.

Refer to the video in the "Cleaning & Maintenance" section for visual guidance on automatic cleaning and dust bag replacement.

Method 2: Manual Dust Cup Emptying

Take out the extension hose and the floor brush head. Push the ash-dumping push rod forward above the trash bin. Open the bottom cover of the dust cup, pour the garbage in the dust cup into the trash bin, and then put the bottom cover of the dust cup back on.

Refer to the video in the "Cleaning & Maintenance" section for visual guidance on manual dust cup emptying.

Method 3: Deep Cleaning of Dust Cup Components

When you feel that the suction power is weakened, it is necessary to conduct a deep cleaning of the dust cup components.

1. Press the dust cup release button, and then lift the dust cup upward to take it out.
2. Pressing the release button on the bottom cover of the dust cup can also open the bottom cover of the dust cup.
3. Rotate the pre filter cotton counterclockwise to remove it.
4. Rotate counterclockwise to take out the cyclone tower. (Note: The 14-hole cyclone cone on the body of the machine cannot be disassembled. If there is garbage in the conical holes, it is necessary to use tools similar to chopsticks to clean them to avoid blocking the conical holes.)
5. Open the rear cover of the machine casing and take out the filter element.

[Tip: Make sure all components are fully dried (avoid direct sunlight) before installation.]

Clean the dust cup, front filter cotton, cyclone tower and filter element with tap water.

• 

  Image: Separated and cleaned components of the dust cup and filter system, ready for reassembly.

After cleaning, make sure to dry all the components thoroughly before reassembling them.

1. First, insert the filter element. Then put the rear cover of the machine casing de nuevo encendido.
2. Rotate the cyclone tower clockwise and install it.
3. Rotate the front filter cotton clockwise in the correct position and put it back.
4. Push the dust cup into the body of the machine according to the direction indicated by the arrow, the dust cup with the slot on the body of the machine. A "click" sound indicates that the installation is completed.

Refer to the video in the "Cleaning & Maintenance" section for visual guidance on deep cleaning and reassembly.

6.2 Limpieza del cepillo giratorio

[Note: It is not recommended to wash the roller brush with water.]

If you need to clean the roller brush, you can hold the handle position on the side cover of the roller brush with your fingers and rotate it downward, and then pull out the roller brush. Use scissors to clean the hair wound around the roller brush. Then put the roller brush back along. Then tighten the side cover of the brush.

Refer to the video in the "Cleaning & Maintenance" section for visual guidance on cleaning the roller brush.

6.3 Cleaning the Carpet Brush

If you need to clean the carpet brush, hold the handle position on the cover of the carpet brush with your fingers and rotate it downward, and then pull out the roller brush. Wipe it clean with a wet cloth, Place it in a dry place to dry, First, put the roller brush back in, Then press the side cover of the carpet brush upward.

Refer to the video in the "Cleaning & Maintenance" section for visual guidance on cleaning the carpet brush.

6.4 Cleaning the Hair Screw Tool

If you need to clean the hair screw tool, Press the release button of the hair screw tool, and then hold the handle position on the cover of the hair screw tool with your fingers and rotate it upward to take out the cover of the hair screw tool, Wipe the roller brush and the cover of the hair screw tool clean with a wet towel. Put the cover of the hair screw tool back along the roller brush until it is in place, and then press it downward.

Refer to the video in the "Cleaning & Maintenance" section for visual guidance on cleaning the hair screw tool.

7. Solución de problemas

If you encounter any issues with your Deerma T50 Station, please refer to the following common problems and solutions:

8. Especificaciones

9. Garantía y soporte

For warranty information, technical support, or to purchase replacement parts, please visit the official Deerma webSitio web o contacte con su servicio de atención al cliente. Conserve su recibo de compra como comprobante.

Official Deerma Store: Visit the Deerma Store on Amazon