1. Información importante de seguridad
Before operating your AMIGO E-Lagos T3 electric bicycle, please read and understand all instructions and safety warnings. Failure to follow these instructions may result in serious injury or damage to the bicycle.
- Usa un casco: Utilice siempre un casco de bicicleta homologado cuando conduzca.
- Comprobación previa al viaje: Before each ride, inspect the brakes, tires, lights, and ensure all quick releases and fasteners are secure.
- Leyes de tráfico: Obedezca todas las leyes y regulaciones de tránsito locales. Conduzca con precaución y esté atento a su entorno.
- Condiciones climáticas: Tenga cuidado al conducir en condiciones de humedad, ya que la distancia de frenado puede aumentar. Evite conducir bajo lluvia intensa o nieve.
- Límite de peso: Do not exceed the maximum load capacity of the bicycle.
- Componentes eléctricos: Keep electrical components dry. Do not submerge the bicycle or battery in water.
- Niños: This electric bicycle is intended for adult use.
2. Configuración y preparación inicial
Your AMIGO E-Lagos T3 electric bicycle may require some minor assembly and preparation before its first use.
Figure 2.1: The AMIGO E-Lagos T3 Electric Bicycle, ready for use.
2.1 Desembalaje y montaje
- Retire con cuidado la bicicleta de su embalaje.
- Install the pedals: Ensure pedals are threaded correctly (L for left, R for right) and tightened securely.
- Adjust the handlebar and saddle height for a comfortable and safe riding position. Ensure all quick-release levers are firmly closed.
2.2 Carga de la batería
The battery is integrated into the rear rack and is removable for charging.
- Localice el puerto de carga en la batería.
- Conecte el cargador a la batería y luego enchufe el cargador a un tomacorriente de pared estándar.
- El tiempo de carga es de aproximadamente 5.5 a 7.5 horas para una carga completa.
- No deje la batería cargándose sin supervisión durante períodos prolongados.
2.3 Inflado de neumáticos
Ensure tires are inflated to the recommended pressure, typically found on the tire sidewall. Proper inflation improves ride quality and prevents punctures.
3. Instrucciones de funcionamiento
Familiarize yourself with the controls and functions of your E-Lagos T3 electric bicycle for an optimal riding experience.
3.1 Encendido/apagado y visualización
Figure 3.1: The Ananda D15 LED display on the left handlebar, showing battery level and assistance mode.
- Para encender: Press and hold the power button on the Ananda D15 LED display (located on the left handlebar).
- Niveles de asistencia: Use the '+' and '-' buttons on the display to select one of the 5 available pedal assistance levels. Level 1 provides minimal assistance, while Level 5 provides maximum assistance.
- Para apagar: Mantenga presionado el botón de encendido nuevamente hasta que la pantalla se apague.
- The display shows battery charge status and current assistance level.
3.2 Cambio de marchas
Figure 3.2: The Shimano Nexus 7-speed grip shifter on the right handlebar.
Your E-Lagos T3 is equipped with a Shimano Nexus 7-speed internal gear hub. Shift gears using the grip shifter on the right handlebar. Shift to a lower gear for easier pedaling on inclines and a higher gear for faster speeds on flat terrain.
3.3 Sistema de frenado
The bicycle features a V-Brake on the front wheel and a coaster brake (backpedal brake) on the rear wheel.
- Freno delantero: Operated by the lever on the left handlebar. Use for controlled stopping power.
- Rear Brake (Coaster Brake): Activated by pedaling backward. Provides reliable stopping for the rear wheel.
- Always apply both brakes simultaneously for effective and safe stopping.
3.4 bloqueo del manillar
Figure 3.3: The handlebar lock mechanism, used to stabilize the front wheel when parked.
The integrated handlebar lock helps stabilize the front wheel when the bicycle is parked, especially when loaded with items on the front rack. Rotate the mechanism to 'LOCK' to secure the handlebar, and to 'FREE' to allow steering.
3.5 Sistema de iluminación
The E-Lagos T3 is equipped with LED lights for both front and rear visibility.
Figure 3.4: The front rack with the integrated LED headlight for improved visibility.
- The lights are powered by the main battery.
- Turn on the lights using the dedicated button on the display or as instructed by the display manual.
- Ensure lights are functional before riding in low-light conditions.
4. Mantenimiento
El mantenimiento regular garantiza la longevidad y el funcionamiento seguro de su bicicleta eléctrica.
4.1 Cuidado de la batería
- Cargue la batería periódicamente, incluso si no está en uso, para mantener su salud.
- Guarde la batería en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
- Evite descargar completamente la batería antes de recargarla.
4.2 Limpieza
Limpiar la bicicleta con publicidadamp Paño y jabón suave. Evite usar hidrolimpiadoras directamente sobre componentes eléctricos o cojinetes.
4.3 Brakes and Tires
- Revise periódicamente las pastillas de freno para detectar desgaste y reemplácelas cuando sea necesario.
- Ensure brake cables are not frayed and are properly adjusted.
- Mantenga la presión correcta de los neumáticos como se indica en el lateral del neumático.
4.4 Cadena y transmisión
Keep the chain clean and lubricated for smooth operation and to prevent premature wear. The Shimano Nexus internal gear hub requires minimal maintenance but should be checked periodically by a professional.
Figure 4.1: The AXA Solid Plus ring lock provides integrated security for the rear wheel.
5. Solución de problemas
This section addresses common issues you might encounter with your AMIGO E-Lagos T3 electric bicycle.
| Problema | Posible causa | Solución |
|---|---|---|
| El motor no asiste | Battery low or depleted; System not powered on; Assistance level set to 0. | Charge battery; Power on the system via display; Increase assistance level. |
| Las luces no funcionan | Lights turned off; Battery low. | Turn on lights via display; Charge battery. |
| Los frenos se sienten débiles | Brake pads worn; Cables loose; Improper adjustment. | Inspect and replace brake pads; Adjust brake cables; Consult a bicycle mechanic. |
| Ruidos inusuales en la transmisión | Dry or dirty chain; Loose components. | Clean and lubricate chain; Check for loose bolts or components. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support or a qualified bicycle mechanic.
6. Especificaciones
Detailed technical specifications for the AMIGO E-Lagos T3 Electric Bicycle.
Figure 6.1: The Ananda M129 front hub motor provides pedal assistance.
| Característica | Especificación |
|---|---|
| Nombre del modelo | E-Lagos T3 |
| Tamaño del marco | 50 centímetros |
| Tamaño de la rueda | 28 pulgadas (71 cm) |
| Material del marco | Aluminio |
| Engranajes | 7-speed Shimano Nexus (internal gear hub) |
| Tipo de motor | Ananda M129 Front Hub Motor |
| Sensor Pedal Assist | Rotational sensor |
| Capacidad de la batería | 468 Wh (36V, 13Ah) Greenway YJ-145 Lithium-ion |
| Posición de la batería | Integrated into rear rack, removable |
| Tiempo de carga | 5.5 - 7.5 horas |
| Rango | 45 - 120 km (approx. 65 km average) |
| Velocidad máxima (asistida) | 25 kilómetros por hora |
| Mostrar | Ananda D15 LED (5 assistance levels) |
| Freno delantero | Freno en V |
| Freno trasero | Coaster Brake (backpedal brake) |
| Luces | LED delantero y trasero |
| Accesorios | Double kickstand, closed chain guard, front and rear luggage racks, luggage straps, handlebar lock, bell, AXA Solid Plus ring lock |
| Peso | Aprox. 29 kg |
Figure 6.2: The Shimano Nexus 7-speed internal gear hub and coaster brake on the rear wheel.
7. Garantía y soporte
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or spare parts, please contact the AMIGO customer service department or your authorized dealer.